Ubuntu Networking :: Connecting With Ath9k Produces "Bad Password"?
Apr 14, 2011
I've been working on this for a while. I have done the whole "install backports" thing, and that got me to the point where I can see the wireless connections; however, when I try to connect, I get a "Bad Password" message (which I don't believe, in the sense that I've checked the password back and forth several times). I am using maverick on an HP Pavilion dv7-1120. The relevant section of the lshw command is:
*-network
description: Wireless interface
product: AR928X Wireless Network Adapter (PCI-Express)
[code]...
View 1 Replies
ADVERTISEMENT
Jun 5, 2011
I'm a novice using Ubuntu 10.1 on an Asus EeePC. For several days, my computer has refused to connect to the office wifi, though it's had no trouble doing this in the past. It recognizes the signal, and the wifi icon keeps indicating that it's in the process of connecting, but the process never completes. Every few minutes I'll be asked to re-enter the password. Eventually it gives up.
I'm not sure if this problem extends to other wifi networks or just the one at my office.
View 8 Replies
View Related
Apr 9, 2010
I installed Ubuntu on an old desktop last night and am having some problems with my wireless connection.I've searched around a bit and tried a few solutions but nothing seems to be working so hopefully someone can help. I'm using a Netgear WG111v3 wireless USB adapter and am attempting to connect to a Sky Broadband modem, the connection shows up in the list of avaliable networks after clicking on the network symbol and after attempting to connect for a while it then asks for the WPA password.
I enter the password and then this repeats over and over again continuously asking for the password and me continuously entering it. I know the password is correct as I'm using it on my laptop and other home computer right now.I've tried connecting to a hidden wireless network and inserting the network name and password as some have suggested and I've also tried adding the details from my router into the connection; so that I have manually entered the information rather than automatically finding it, this also hasn't worked.I should probably add that earlier today I seemingly randomly got connected and then managed to run some updates but since then it has disconnected and the same problem is repeating over and over. Sorry if thats quite a long explanation but I thought I'd try and make it as clear as possible,
View 1 Replies
View Related
Jun 10, 2010
I have been having a lot of problems trying to get my wireless card working. I am running ubuntu 10.04 and ever since the install, the wireless detects the network, asks me for the password, then, hangs for a while and asks me for the password again.
Its a fresh install.
Here are some outputs i got from the terminal. There are a lot of outputs i just put into a few text files.
View 1 Replies
View Related
Apr 9, 2010
Anybody have any idea that how to set the ath9k in master mode in fedora 11. I am unable to set the same.
I am using the D-Link DWA556 card using the kernel built in ath9k.Find below the output I got while setting up it in master mode sudo iwconfig wlan0 mode master.Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.Does that mean that master mode is not supported?Also Want the information if there is any separate community or development group for ath9k development and download the source of same except linuxwireless.com.
View 1 Replies
View Related
Nov 19, 2010
I've been running hostapd for a while in 11g mode with great success. Having upgraded the router machine to maverick today, I had a poke at getting hostapd working in 11n mode without too much fuss. From cursory reading of old forum posts, this appears to now be built in functionality without needing to compile drivers or hostapd from source - this is borne out by a few 11n-related lines in the default configuration file.
When adding those two lines to my config file, though, I get the same error message I did a few years ago when trying this out for the first time:
[Code].....
View 2 Replies
View Related
Jan 10, 2011
I've recently purchased a TP-WNL951N PCI Card for wireless N stuff. I have a Netgear WNDR3700 for use with my AP and I've confirmed that within windows XP I can connect at 300mb/s.
Within Ubuntu though, it only goes up to 54mb/s. Is there something special I need to do to enable wireless N speeds?
Here's some info that I should probably put in:
Code:
root@Linux:~# lspci -nn | grep Atheros
05:00.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)
root@Linux:~# ifconfig wlan0
[Code]....
View 9 Replies
View Related
May 1, 2011
Since upgrading to Ubuntu 11.04 my wireless connection has been extremely slow. The same happened with 10.10. Although that was quite different. Back then everything within my network moved slowly, but now it doesn't affect my web browser. It seems to have only slowed the application centre and update manager. I am still waiting for the flash plugin to download and install for testing ....., but I am torrenting Ubuntu 11.04 right now and have actually hit the limit of my bandwidth (1.1 MB/s) whereas the speed in the software centre and update manager was in the region of 45 kb/s.
I'm not sure if this is because I have installed extra drivers found here after I did some research.
Although my web surfing is fast and stable, I would like to get my updates and applications downloading properly. Does anyone know what I can do?
From my 2-hour googling spree I know you may want the results from the command "lspci"
Code:
root@Felicia:/home/silkworm# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 9 Replies
View Related
Jun 30, 2011
Since I installed Ubuntu I've had this problem that makes me loose connection to the Internet. The wireless-icon on the panel starts loading, and after like 5 minutes, it works again.I had this problem when I had Mint 11, but it happened more often.Anyone know how to fix? Edit:Network: Card-1 Atheros AR9285 Wireless Network Adapter (PCI-Express) driver ath9k Card-2 Marvell 88E8040 PCI-E Fast Ethernet Controller driver sky2
View 2 Replies
View Related
Jul 7, 2009
Today I finally installed Fedora 11 on my new laptop. To my surprise wireless was working already, this was something very new. however, i realized that the ath9k had a very bad connectivity. I cant even connect to my router from my bedroom which is less then 10 metres away. Is there some remedy for this unstable module? I have tried madwifi but it doesn't seem to work with my card which is a Atheros AR9285. Hopefully someone can shed some light on how he/she overcame this problem.
View 2 Replies
View Related
Oct 22, 2010
I have had some trouble with understanding the wireless drivers. I am using backtrack 4 R1, and the reason was merely for the network and having many necessary networking dependencies already there. However I found that I am using a HAL for the ath9k and madwifi-ng drivers, thus I must patch the card and go through all of that.
The specific distribution I am using is Backtrack 4 R1 with KDE3 and ubuntu on the 2.6.34 kernel. I know I have through an update script found the wireless drivers and downloaded them, however all attempts to get it to fully work haven't helped. I checked the forums, and it doesn't seem like they consider it a backtrack specific question but a linux specific question. I performed hwinfo and it returns ath9k and the memory address, channels 1-14, wlan frequencies(2.412,2.417, 2.422, 2.427, 2.432, 2.437, 2.442, 2.447, 2.452, 2.457, 2.462, 2.467, 2.472, 2.484. I have all modes of encryption set.
I am using both ifconfig and iwconfig with a wicd frontend to access the network typically. Unfortunately I am only seeing a wlan0 and no ath0. Furthermore, I manually issue these commands I am doing so I set each aspect of the card up (i.e essid, channel, mtu, fragmentation, etc....).
Now I did shed some light upon this in the sense that I found out how to initialize the madwifi-ng hal abstraction layer via 'start airmon-ng wlan0' and then it returns.....
mon0 ath9k py0 etc. etc. etc.( this isn't exact I am unfortunately not at my computer. But the device is then able to work, however I am not sure as to why I am not able to have the ath0 device in my wireless devices if indeed everything else appears to be ath0.
View 5 Replies
View Related
Sep 18, 2009
I am trying to get my wireless card working in master mode. I am running Jaunty server 2.6.28-11 x86_64. I have compiled hostapd with nl80211 enabled. The interface is using ath9k. I have tried to compile compat-wireless with this patch. However IEEE80211_IF_TYPE_AP was undefined along with IEEE80211_IF_TYPE_VLAN. In addition the latest version of compat-wireless needs to be patched for kernels < 2.6.31 with this. However when using this patch IRQ_WAKE_THREAD is still undefined.
I have got to this message:
Code:
$ sudo hostapd /home/jophish/.hostapd.conf
Configuration file: /home/jophish/.hostapd.conf
Failed to set interface wlan0 to master mode.
[code].....
View 1 Replies
View Related
Dec 3, 2009
I have a small intel Atom based computer that acts as a 'combo' firewall / router / server / 802.11 Access Point that services my end user needs. I'm using hostapd 0.7.0 and Fedora 12 x86_64. The system works fine on Fedora 11. I decided to upgrade to Fedora 12 last night, and completely broke my wireless. Note that configurations are _identical_ between the Fedora 11 and Fedora 12 installation. Though, I did recompile the hostapd binary under Fedora 12 libs, etc.
Anyway, Client #1 associates fine. Client #2 associates, and hostapd hangs. Strace'ing the process shows nothing... just.. dead. SIGTERM works, but hostapd is unable to 'unallocate' the wlan0 interface, which appears to be in a hung state, so I can't simply re-start hostapd. So, I have to remove wlan0 from my bridge, them rmmod ath9k, modprobe ath9k, re-add wlan0 into the bridge, restart hostapd.. But the second association consistently hangs it every time. Next, I went and downloaded the latest compat-wireless drivers as of this posting. Selected the ath9k driver, built the modules, replaced them in my /lib/modules tree, depmod'd, reboot, etc..
BIG difference. Now hostapd does not hang, and there appears to be better logging/debug than ever before. This made me happy. Unfortunately, there appears to be a new problem. Clients can now associate, but only for a split second. They are immediately disconnected, and the following message appears via hostapd's stdout logging: hostapd: wlan0: STA 00:21:5c:39:a3:99 IEEE 802.11: did not acknowledge authentication response
For every client that attempts connection. Note that I'm using WPA2-EAP-PEAP w/ MSCHAPv2. I've also, for kicks, just tried regular WPA2-PSK with similar results. I'm using a mixture of clients, Windows XP, Windows 7, Linux Ubuntu, Fedora, and others.
[Code].....
View 1 Replies
View Related
Feb 21, 2011
When I tried to get it to connect, I keep getting "bad password,' and I've entered the password the router uses. I'm using Fedora 13, 32 bit, and have to use ndiswrapper to get my receiver to work. AND (it's a big "and," I'm afraid) I'm using wicd. I have Ubuntu, Linux Mint, and Fedora as operating systems. Ubuntu froze when I tried getting this to work! I have Linux Mint 10 on one computer, Mint Debian on another, and Mint LXDE on an ancient Thinkpad. All three versions of Mint connected without a problem! The Ubuntu fubar may have come from the ndiswrapper driver..who knows? It worked without a hitch for three months before it had a melt-down. Any way to do an end-run around the "bad password," as in maybe using the terminal instead of the GUI?
---------- Post added at 12:54 PM ---------- Previous post was at 10:22 AM ----------As a side note, I went with wicd because Network Manager seemed to drop the signal frequently, and I had to reboot to reconnect. Not a Fedora problem per-se, as that's a problem that I have with NM on every distro I've seen. But if it would solve the password problem by "turning off" wicd and re-enabling Network Manager, I can give that a shot, if there's a command to do that. I'm not able to get to the web on this computer right now, but Network Manager was disabled from the command line, and I assume it could be re-enabled just as easily.
View 14 Replies
View Related
Feb 9, 2010
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies
View Related
Nov 12, 2010
I've been trying to figure out how to set up vsftpd on a test machine to emulate the ftp setup on our current ftp server. I was able to track down part of what I needed with the gracious help of poster AlucardZero on this forum, who pointed out that the vsftpd process likely being run via xinetd.
I've managed (or so I thought) to set everything up correctly - but I cannot connect to my test box as the user the ftp client program we're using expects. I can see in the vsftpd log that I'm making contact, but the client program is automatically failing, and attempts to get in from the Windows command line (ftp <ip>) request user and password, then fail out with '530 Login incorrect'.
Everything I've seen online so far indicates that the ftp login for a local user (with vsftpd configuration settings including anonymous_enable=NO and local_enable=YES) should be the same as the 'normal' login for that user, and that the passwords should be the same as well. This is the case on the current FTP server, where a Windows command line login uses the same password as attempting to su into the user in question. On my test machine, I can su into the user in question with the password as well. I simply cannot seem to connect with this user via ftp.
Below are the things I've found so far during my search on the two servers:
Code:
I'm obviously missing something simple, because I've read many posts on this site and others concerning successful setups - I simply haven't managed one on my own. Most of these eventually boiled back down to this howto page, and I've tried to follow the 'add and change user' instructions shown there to no avail.
View 7 Replies
View Related
Mar 7, 2010
I'm using Fedora 12 KDE, and I'm trying to connect a Lexmark printer. It's a printer that I can connect to in other KDE distros. When I try to connect to it through the system settings printer manager I get a popup window that says, "Password may be incorrect", and then it goes to the new printer window. However, there is no option for a lexmark printer, lpd, ipp, or anything in the left menu bar. There's only an option for other, and a little box that asks for the uri. Am I missing a package, or is this normal behavior? Do I have to somehow open this up in sudo? Am I missing a package? I have cups, foomatic, and ghostscript installed.
View 1 Replies
View Related
Sep 29, 2010
I on a windows XP workstation mapping a drive \systemnaneshare and it asks for username and password. I disabled guest account in windows 2k3.
View 3 Replies
View Related
Mar 4, 2011
I got a TP-Link WN951N Wireless-N PCI card for my Squeeze HTPC (this is AR5008. Performance is awful. On the lucky runs I'm getting 4 MB/s from Samba, most of the times I'm seeing 1-2 MB/s, and sometimes less than 1 MB/s. Also, ssh is not smooth, e.g. when I type commands, it can take seconds before text appears on the console, or I get slo-mo. Forcing 11g gets me a consistent 2.2 MB/s but lag is still there.
The machine has also been tested under XP SP3 and pulled off a solid 11 MB/s on a large file with no lag, so the hardware would seem OK. I've tried several kernel versions (both Liquorix and Debian stock), and a couple versions of compat-wireless (2.6.38-rc4 and 2011/03/03 bleeding edge), with little variation in outcomes. The logs got no weird messages in them, although with the more recent drivers/kernels iwconfig looks like this:
wlan0
IEEE 802.11bgn ESSID:"GuessIt"
Mode:Managed Frequency:2.457 GHz Access Point: x:y:z:t:u:w
Bit Rate=270 Mb/s Tx-Power=19 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=46/70 Signal level=-64 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:64 Invalid misc:19967 Missed beacon:0
Tx discarded packets are through the roof and excessive retries is not bad either. The system doesn't run NetworkManager, wicd or whatnot. All of the wireless is configured through /etc/network/interfaces:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid GuessIt
wpa-ap-scan 2
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <hexbabble>
Did I commit some horribly naive mistake or overlook something Really Important(tm) ?
View 1 Replies
View Related
Apr 17, 2011
Since 2.6.38 ath9k has become slow as a snail. After searching this issue I have found a solution.
Create a file called /etc/modprobe.d/ath9.conf in this file enter thisoptions ath9k nohwcrypt=1Reboot or reload the module and enjoy high speed again.
View 3 Replies
View Related
Jul 24, 2010
I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.
View 1 Replies
View Related
Feb 3, 2010
I have an Asus G51 laptop and for some reason the vertical bar/backslash button produces the greater than/less than symbol (<<>>) instead of the vertical bar. I was wondering what the command is for changing a character that the key produces.
View 3 Replies
View Related
Mar 1, 2011
I have earlier downloaded many video and picture files to blank DVD's using Brasero with ubuntu. But now most attempts fail. This might be after upgrading to latest ubuntu, but then again maybe this is not the cause, 'cos maybe once in 6 attempts brasero works ok.
It seems to take a long time - maybe 40 mins - for brasero to go through it's job, and the dvds look ok, but cannot read anything. This is a lot longer than when things worked well.
View 2 Replies
View Related
Apr 15, 2010
I went to a help site because I wanted to install an IRC client named seamonkey. I followed the directions step by step, copy and pasting each and every command into my terminal command line as per the instructions. Every single command produced an error. Needless to say, I was unable to install it. What's even more frustrating is I can't even post the url for the site here so someone can see what commands I was using.
View 10 Replies
View Related
Jul 31, 2011
Just re-installed Bodhi. Ran update, dist-update, set up connection and connection still slow or timing out and reporting errors in 'iwconfig'. This is 3rd re-install of this version. Have also tried 3.0 kernel and pae versions of Bodhi. Cannot get this connection up to speed and without errors. Atheros chipset ar9271.
Sorry for weird subject line and opening paragraph. Trying to make it easy to find and browse in case this gets solved and can help someone else. Not being a Linux guru, I can only hope to help others through my mistakes and ignorance.
I followed instructions to update driver listed at Linux Wireless.
In addition to following the directions at Linux Wireless, I also downloaded the GUI Program to install ath9k_htc.
No luck. My connection reports 1M/s and is reporting "invalid misc:" errors in iwconfig.
I'm running Midori browser but apt-get and wget are also downloading slowly.
I'm connecting to a Zyxel 660 series router using WPA/WPA2.
uname -r
Code:
Code:
Code:
Code:
sudo lshw:
Code:
View 1 Replies
View Related
Jan 1, 2010
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
View 5 Replies
View Related
Feb 19, 2010
I have 2 USB drives. I have had 9.04 running on one for some time. I used Disk Creator in 9.04 to 'create' the drive. I use it as a reference to verify how things went in 9.04 if I hit a problem with 9.10.
However, after some months, when I tried this USB drive it produced this 'Boot Failure'. I followed up by checking the other USB drive which had Lubuntu installed via USB Disk Creator and it produced the same result ie 'Boot Failure'.
The Machine bios is set in the correct order.
I have tried to 're-do' things via 'Disk Creator' in 9.10 and 9.04 with the same result. It is not likely that both USB drives have failed at the same time.
Is Grub2 at fault in some way?
View 1 Replies
View Related
Jun 24, 2010
When ripping a CD, Banshee produces two songs in my library for each track on the CD. Both songs point to the same file in my Music folder (so just one actual file). Also of note, one of the songs is always a few seconds shorter than the other. I can safely remove the shorter version of each song from my library without repercussions, it's just annoying and weird.
View 1 Replies
View Related
Sep 8, 2010
I am using Ubuntu 9.04 Server. I use screen alot for persistant sessions and suddenly I have a problem. When I type Code: screen -R -DD as usual, I get into screen but there is no command prompt. There is a cursor and I can type commands which work, eg ls. However I don't know which directory I am in, so it makes using it rather hard.
View 9 Replies
View Related
Oct 21, 2010
I've no problems with sound on my laptop - it all works fine but Flash produces no sound at all.
I've got the Pulse audio applet running and when I'm using Rhythmbox it shows that on the playback tab and you can see the signal on the signal bar.
Viewing Flash videos shows the ALSA Plugin but shows no signal on the signal bar.
View 7 Replies
View Related
