Ubuntu Networking :: Steps To Install And Enable Ath5k
Oct 22, 2010Can any please help to get steps to install and enable ATH5K on Ubuntu 10.04
View 2 Replies
ADVERTISEMENT
Ubuntu Networking :: Patching The ATH5K In Lucid?
Sep 12, 2010i cannot find how to sucessfully patch the ATH5k driver for aircrack for better support on injection. i tried this...[URL] but it was a no go for me... first... i untarred it to my desktop, then i patched the ATH5k driver but batch 2 failed and i had to take out the switches in the patch command to work. can someone please give me (and im sure many other people) a litteral step by step to patch this damn ATH5K driver, i got another one i want to patch with i found on the aircrack-ng that i want to patch as well but the same issue is there...i run Ubuntu 10.04 with the 2.6.32-25-generic kernel, no custom anythings, not even compiz.
View 4 Replies View RelatedUbuntu Networking :: Wireless Constantly On And Off Eee Pc Ath5k Driver?
May 23, 2010Cannot get wireless to work. Hostapd.conf had nothing inserted in it so I put the following in which I found [URL]..So it connected right away and then disconnected after opening one of my tabs. I went back into hostapd.conf and it had erased all the info I put in there. Is there a way to keep it from deleting this info every time. Because it worked great for a brief second. Otherwise it just keeps going on, then going off. It stays off most of the time though. Right now this is what my iwconfig reads:
[Code]...
Ubuntu Networking :: Ath5k Wireless Suddenly Stopped In 10.04?
May 26, 2010Hope this saves some1 an immense amount of time;First type this;
Code:
rfkill list
check if the problem looks like this
[code]....
Fedora Networking :: Can't Start Wireless Automatically With Ath5k On F9
Jul 4, 2009After an upgrade to 2.6.27.25-78.2.56.fc9.i686 in March, my Atheros wireless stopped working. (It had previously run without a hitch for 9 months). Anyway, I finally got around to working on it today and using the "WiFi misery" thread managed to consistently get it to start manually via these steps:ifconfig wlan0 up
iwconfig wlan0 essid netname key xxxxxxxxxxxxx
click on "activate" in network device control (gives error msg, but works)
During boot-up, I get "Invalid argument" errors for "SET MODE", "SET BIT RATE", and "SET ENCODE".Currently NetworkManager service is disabled, but when enabled doesn't seem to change any of the above.I'd like to get back to automatically coming up wireless, if possible.
CentOS 5 Networking :: Wpa_supplicant With Ath5k In WPA2/PSK And AES/CCMP
Jun 5, 2010I'm trying for some time to configure my WIFI on my laptop, without success .
My router: TRENDnet TEW-432BRP
SSID: MINETTI
Channel: 6
Extended Range Mode: disabled
[code]....
Ubuntu Networking :: Atheros "ath5k" Wireless Not Working?
Jun 5, 2011I've followed a few different steps to try and solve the wireless issue, but no luck so far. I have a Compaq Presario CQ60 with Atheros 5001 "ath5k" driver and module. I use "WPA & WPA 2 Personal" security.I first did "rfkill list all" to see what was being blocked, and at the time, I had this:Quote:
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: yes
[code]....
Ubuntu Networking :: Final Steps For DWA 125 With 10.04?
Feb 24, 2011I am trying to get wireless network with Dlink DWA 125 working unter Kubuntu 10.04 (kernel 2.6.32-23, 32-bit). I already carried out all the hacks for replacing the rt28** modules by rt3070, which seems a rather common issue. What I did is described here:[URL]..Now output of usb-devices is:
Code:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07d1 ProdID=3c16 Rev=01.01
S: Manufacturer=Ralink
[Code]...
One rather silly question (excuse me, never used wireless before):Is the WPA key the 10 digit hex-number labeled "network key" on my hardware ? At least I entered this one under Windows and it worked instantly x( . Even if something is wrong here, I expected some error messages. I feel I got pretty close, but I still need some help for the last few steps. Please give me a tip what might help or how to get some useful error information.
OpenSUSE Install :: When Try To Install 11.2 Do All The Necessary Steps But The Installation Won't Start?
Mar 16, 2010when i try to install opensuse 11.2 i do all the necessary steps but the installation won't start..i installed and used opensuse before im not clueless...before i reformatted my drive i was using windows 7,ubuntu and opensuse together.harddrive (160 gb) is sufficient and the installation was going smooth..i added kde and xfce from the software selection and enabled mbr and boot from /partition...Actually i tried all the alternatives (disabled mbr and /boot,enabled mbr and disabled /partition) but nothing changes..when the installation starts it says ''preparing the disks''but after waiting for 5 minutes and seeing nothing is changed i reboot and take the disk out of disk tray..where am i doing wrong and what i did wrong this time instead of last time that prevented the installation ...i thought my cd went corrupted so i downloaded and burned a new dvd from iso image.
View 1 Replies View RelatedCentOS 5 Networking :: Install The Latest Kmod-r8168 Rpm - It Failed To Enable The Networking Support
Dec 30, 2010I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:
# yum --enablerepo=elrepo install kmod-r8168
The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).
First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):
# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up
Once I do this, I have network connectivity.
General :: Steps To Install Arm - Gcc In Fedora 10?
May 8, 2010i need steps to install crosss compiler arm-linux-gcc 4.3.2 on fedora 10
View 4 Replies View RelatedGeneral :: What Are Necessary Steps To Install And Use Linux
Apr 19, 2011I believe my Dell laptop at home is sucko full of viruses and malware....been cleaned and recleaned multiple times but seems to just come back.I'd like to start over fresh. I'm thinking I should reformat and wipe the disk clean, and do a fresh Linux install. I have decent computer skills, but wondering if someone could share the basic steps with me....ie
1. if necessary, reformat and partition hard drive.
2. load linux os cd
3. load/install linux windows gui.
4. suggested tools/apps for basic computer use like browser for surfing, office type tools like Word, or Excel, power point. etc.
Slackware :: Steps Xorg Install New
Jan 21, 2010I am new to Slackware/Linux and completed the install (Slackware 13 64-bit x86_64).Everything is running correctly.During the install I was asked if I wanted to install X-Windows and I declined.Now I want to install it.I downloaded xorg-server-1.6.3-x86_64-1.txz and installed it using slackpkg.It seemed to me to install very quickly. I see it in the list of installed packages now.What are the steps install a fresh X-Windows on Slackware if I did not pick it during install?
View 5 Replies View RelatedGeneral :: Install PyPedal But Was Overwhelmed By The Steps?
Dec 29, 2010I'm trying to install PyPedal but was overwhelmed by the steps. Here is a link to the program:[URL]..The first problem is, on this page [URL].., the package is described as .tar.gz, however when I try to download, the package is a .egg I searched online since I never dealt with a .egg, some suggest to use the unzip command others have used the command without success.
The second problem is, I have to install Python which I have no experience with. This the Python page[URL].all the Linux files seem to be source tarball. What would be the best way to install a source as I have never done this before? The third problem is, which of the third-party extensions used by PyPedal listed in this link I could skip installing [URL].. . All I interested in is getting the numerical result that this program produces. Assume that I have download the PyPedal and Python files to the /home directory.
General :: Steps To Install Moodle In Fedora 9
Jun 9, 2010i have downloaded the moodle zip file and xampp for server.please give me the steps how to install and start running moodle on fedora 9
View 2 Replies View RelatedSoftware :: Steps To Install Java In Fedora
Dec 18, 2008I downloaded jdk-6u11-linux-1586.bin for working java. I don't know whether I downloaded bin file is correct or not. If it is not correct means what type of file I download to install java. I request u to tell steps for install the java.
View 1 Replies View RelatedSlackware :: Dual-Boot Install Steps
Jun 26, 2011I'm trying a Windows XP / Slack 13.37 dual-boot install and I wouldn't like to use grub. Then, at first I chose XP and after that LEET, but there was a twice lilo problems. Now I'd like to know:
1)During install what to reply during "Pick Mount Points for /dev/sda1" step, if I use NTFS Windows filesystem?
2)Is NTFS suitable in a XP/Slack dual boot schemes or FAT is in fact better?
CentOS 5 :: What Are Steps To Install Java Into Machine?
Sep 17, 2010I have a centos 5.5 server. When I do a java -version it says command not found. So it means java is not install right. What are the steps for me to install java into my machine?
View 8 Replies View RelatedUbuntu Networking :: What Are The First Basic Steps To Setup A Wireless Connection
Aug 7, 2010I have a computer with both wire and wireless connections. Wired connection works fine, but I would also setup the wireless connection.(I also have a dual boot on this cumputer with WinXP where both wire and wireless connections works fine. So, wire and wireless configuration of the actual router is not an issue here.)
At this point I just want to know the main/overview basic steps of setting-up the wireless connection on the computer. Also if you could suggest any links to guidelines for these steps. I have been thinking about something simple like this, but I might have missed a lotInvestigate if Ubuntu finds the wifi-hardware - the installed wifi card.Investigate if Ubuntu have an installed driver for this wifi-card.Configure the Wireless Network connection, like SSID.Unplug wire connection and reboot.
Debian :: Install Dependency Chain Of A Deb Pack In Few Steps?
Jul 12, 2011There may be a way not to download all dependency and install one by one.But how?Sorry for such a basic question but i could find only solutions for ubuntu.
View 6 Replies View RelatedInstallation :: Steps To Follow To Install Hylafax 6 On Fedora 14?
May 19, 2011Find a link or steps to follow to install Hylafax 6 on Fedora 14. I searched the google but unfortunately could not get any luck.
View 6 Replies View RelatedFedora :: Steps To Install System Dc++ In 11 From Source Tar File?
Oct 2, 2009I have downloaded the linuxdcplus 1.0.3 source file. However i am unable to install the same in my fedora 11. could anyone guide me and all with detailed step by step instructions and the possible options?
View 1 Replies View RelatedFedora Installation :: Dual Boot Install Guide Or Steps?
Jan 2, 2010I have been searching around and found lots of details of how to fix a dual boot situation gone wrong but I have not run across a guide or steps on how to install Windows & FC12 the correct way.I have to reinstall my computer any way for other reasons so I am going to reinstall with either XP or Win7 (leaning towards 7) and Fedora 12. I can dedicate a drive to each OS no problem and I can imagine how I would install each on it's own drive, but not quite sure what to use as a boot manager?
View 7 Replies View RelatedRed Hat / Fedora :: Steps To Install And Configure Nagios In Redhat Machine?
Jul 6, 2011can any one provide the steps to install and configure Nagios in Redhat Linux machine?
View 2 Replies View RelatedGeneral :: Steps To Install Nokia Pcsuite In Redhat Enterprise System 6?
Feb 14, 2011I don't know about how to install nokia pcsuite in redhat enterprise linux 6.
View 5 Replies View RelatedGeneral :: No Option To Install CentOS 5.6 From Live CD To Hard Drive On Desktop / Steps For This?
Jul 16, 2011I have a problem installing of centOS 5.6 from live CD.
I cannot see any option to install centOS 5.6 from live CD to hard drive on the desktop. Can anybody provide me with the steps for this.
General :: Adding Blacklist ATH5K - No Permissions?
Feb 2, 2011I am trying to add "blacklist ath5k" to the end of the blacklist.config file but it tells me that I don't have permissions to do this. Went to permissions and it says that only the owner can change this. As for owner it says read and write. In ownership it just says user: root and group: root. Very new to this stuff so I am not sure what to do.
View 1 Replies View RelatedDebian Configuration :: Ath5k Mini-pci Works, But The LEDs Are Off?
Oct 23, 2010At first I thought the card was broken, but it connects to networks fine. I know its kind of minor, but is there a way to enable the little traffic indicator lights on the card?
View 1 Replies View RelatedUbuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedDebian Hardware :: Testing Is Now Soft Blocking WiFi (ath5k)
Aug 20, 2014Regularly updated debian testing on a netbook. I normally use wired ethernet, but I am pretty sure that I had wifi (wlan0) working normally a few days ago.
Today, I find that wlan0 has a soft block:
# rfkill list
0: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
It seems that the kernel(?) is sending a udev event to set this:
# rfkill event
1408563052.478251: idx 0 type 1 op 0 soft 1 hard 0
# rfkill unblock wlan
works *unless* the wifi button on this laptop is used. Then I get an apparently permanent hard block.
rfkill cannot unblock, and repeated button actions do not clear.
Adding the no_hw_rfkill_switch to the ath7K driver ensures that the wifi button is disabled.
All this is new: I have been using wifi on this netbook for years without problems, so something has changed. I moved to systemd (sigh) maybe a month ago, so perhaps the root problem is a systemd udev bug.
The real problem is knowing where to look or bug report. Is it a recent change in the ath5k driver or kernel? IIRC I checked the driver and there were no recent commits. Likewise rfkill hasn't changed recently. More likely to be something around systemd udev, perhaps, given the mayhem systemd has caused on another machine here. Or perhaps somewhere in the wireless subsystem.
lspci -k includes:
03:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e008
Kernel driver in use: ath5k