I am having trouble with my local ssh connection. In my hosts.deny I have ALL, and in my hosts.allow I have my computer. I cannot connect unless I comment out the ALL in hosts.deny. Why is it not allowing a connection?
View 1 Replieshost - Debian 5.0 desktop
guest - Debian 5.04 desktop
KVM
On host running; $ ssh -XfC -c blowfish user@guest_IP xterm$ /usr/bin/X11/xauth: error in locking authority file /home/user/.Xauthority X11 connection rejected because of wrong authentication. xterm Xt error: Can't open display: localhost:10.0 (hanging here) /home/user/.Xauthority is an empty file, just created. $ sudo ls -l /home/user/.Xauthority-rw-rw-rw- 1 user user 1 2010-07-19 03:16 /home/user/.Xauthority
Nor lock exists. The password is correct. $ ssh user@guest_IP xterm I can connect the guest.
I have two machines X , Y . X is running on runlevel 5 while Y is running in runlevel 3 , I am trying to connect from machine x to y using X11 forwarding using the following command.
ssh -X username@IP
But i have the following error message.
"X11 connection rejected because of wrong authentication"
Both servers are running RHEL 4.7
I am running Ubuntu 10.04 LTS. I am trying to run a query browser for mysql but keep receiving the following error:
X11 connection rejected because of wrong authentication.
The application 'mysql-query-browser-bin' lost its connection to the display localhost:10.0; most likely the X server was shut down or you killed/destroyed the application.
In ssh_config, I do have ForwardX11 set to yes.
I can telnet (while on the actual machine) using
Quote:
telnet localhost 25
When I try and use the local machine's ip
Quote:
telnet 192.168.100.9 25
I get
Quote:
Trying 192.168.100.9...
telnet: Unable to connect to remote host: Connection refused
[Code].....
This last one is strange as I the IP looks odd.
What I am doing wrong, and how do I fix it. After much surfing many mosts say that telnet is not used anymore but I want to use it to test my smtp server.
I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.
[Code]....
and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.
Out of the blue a dialog popped up requesting that I enter the key for my home wireless network. This is of course unexpected since the correct key is defined for that network in my network config. I entered the correct key but it was rejected. I then clicked on the network manager icon in the task bar. Contrary to normal behavior this did not show either my home network or any of the other wireless networks from my neighbors. The only resolution I could find to restore the wireless network was restarting my system. This seems excessive.
View 1 Replies View Relatedi installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies View RelatedI have 2 laptops running Ubuntu 10.04. One connects to my Linksys wireless modem fine while the other does not. The one that does not connect, will connect fine within the instances of Windows XP SP3 and Puppy Linux 5.1 that run on the same laptop. Ubuntu wireless worked fine with version 8.04 on this laptop before upgrading to 10.04.
When trying to connect within 10.04, Ubuntu pops up the dialog box to enter the authentication key. It rejects the correct key, and after a moment, pops up the same dialog box asking for the key again. I'm using WEP 40/128-bit encryption and the key I enter in the dialog box is the correct 26-character key.
The laptop is a Toshiba Satellite Pro 6000 (1g ram/40g disk). Here are some vital outputs root@user-laptop:/home/bsmis# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
eth1 IEEE 802.11b ESSID:"kr_wireless"
Mode:Managed Frequency:2.457 GHz Access Point: None
Bit Rate:11 Mb/s Sensitivity:1/0
[Code]...
Each time after boot, I have to wait for proximately 2 minutes before Firefox starts showing any web pages. I believe the delay is caused by the following issue: Code: Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/netcontrol_global_hooks' exited with error status 1.Apr 7 21:03:18 linux-kr6c nm-dispatcher.action: cript '/etc/NetworkManager/dispatcher.d/nfs' exited with error status 2.
Apr 7 21:03:18 linux-kr6c dbus-daemon: Rejected send message, 14 matched rules; type="method_return", sender=":1.50" (uid=0 pid=3132 comm="/usr/lib/NetworkManager/nm-dispatcher.action ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply=0 destination=":1.5" (uid=0 pid=2097 comm="/usr/sbin/NetworkManager "))
Apr 7 21:05:39 linux-kr6c ntpd[3500]: ntpd 4.2.4p4@1.1520-o Mon Jan 19 14:44:51 UTC 2009 (1)Apr 7 21:05:39 linux-kr6c ntpd[3501]: precision = 1.000 usec I have no idea what my machine is doing, but it seems as nothing is happening between 21:03:18 and 21:05:39.
I'm running ubuntu 11.04, and using firestarter for my firewall. Logging events, all good, but I'd like to be able to (tcp)dump the packets being dropped/rejected. Wireshark is great after the event, but can I hook iptables and tcpdump together somehow so the system logs the entire packet rather than the summary when it says "no"? I've had a quick look/google, but can't find anything. I'm sure somebody must have wanted to do this before - any pointers people?
PS - will keep looking and post the answer if I find one....
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies View RelatedI have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies View RelatedI've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
I am having trouble to make my SSH server working with remote machine.
Code:
telnet 192.168.1.102 22
PHP Code:
[Code].....
For strange reasons I was stuck without an Internet connection for about 2 hours. I couldn't establish a connection, even local network only via DHCP. This was on Natty. After 30mins passed, I rebooted to Maverick only to get the same results. With nothing else to do, one hour after, I booted into Windows XP to play Dragon Wars 2. Lo and behold! I had Internet connection. At first I thought it was a technical problem with my ISP. So I rebooted hurriedly to Natty and after several minutes of trying to coax Network Manager for a damn fre*kin* connection it still couldn't.
Back again to XP, I couldn't believe that I wasn't experiencing some kind of on/off signal from my ISP. It wasn't just a coincidence that I could connect on XP and not on Natty. The connection was fine! And I've reason to believe for the past 2 hours, my ISP wasn't the culprit. .. this time it was on my end.Now - on Natty - I manually configured the connection (Instead of DHCP) to be greeted with the familiar Connection Established prompt from notify-OSD.
I am trying to run xeyes on a remote machine via ssh connection. Both my local and remote machines are Ubuntu 10.04. I connect to remote server via ssh -X and It does not forward to display to my local machine...
Code:
root@goliath:/opt/install/bits# ssh -X -l root duke
root@duke's password:
Linux duke 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686 GNU/Linux
Ubuntu 10.04 LTS
[Code]....
i have a Linux Box running RHEL and has no internet connection, hence i need to setup a local repository which i can be able to install packages together with their dependencies.
View 2 Replies View RelatedI have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies View RelatedI am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies View RelatedOn the several machines on my network, I am having difficulty using ssh
and sftp.
Machines are as follows:
1. a Slack machine 2.4.26 kernel
2. a Suse 10 machine 2.6.22.xxx kernel
3. a Ubuntu 9.10 machine 2.6.31.20.xxx kernel
I can use sftp/ssh between 1 and 2. in either direction - no problem.
I cannot sftp/ssh between 3 and anything. sshd is running on the ubuntu machine. I used to be able to sftp/ssh between 2 and 3 but only if 2 started the process.
The failure is machine #3 not accepting the password to or from the other machines, or at least that's how it presents.
All machines can ping each other.
The configs are defaults
I only dimly understand what's going on.
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
I've been using the Ubuntu desktop for a couple of years now, but I don't have much experience using the terminal.
I've just set up a home server using Ubuntu-server 64bit which will be headless and its main function will be a Mythtv backend.
I've worked out how to use VNC to send a desktop from the server to my laptop, but when I try to use any programs which require root privileges such as synaptic or the user/groups manager, the pop-up asking for authentication refuses to accept my password.
Is there a setting I need to change on the server which prevents remote users from getting root privileges on the desktop?
What does this error message in `/var/log/auth.log` mean? It's showing up at about a rate of 1 per second. My indicator applets are missing as are my status bar icons. The desktop icons are flashing on and off at a rate of about 1 per second.
{{{
dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.1299" (uid=1000 pid=18184 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)"
[code]....
A little prior to this I installed Wine beta using Ubuntu Software Centre, then applied the multiuser wine recipe as noted here [URL] /showthread.php?t=917422&), then installed a game called ToonTalk3 [URL], and then tried to install DirectX 10 as per these instructions [URL]
The directx install stalled with a series of messages about being unable to copy certain dll files. I aborted the install, using the install wizard's abort command. It was a bit after this that I noticed the flashing symptoms. They may have been there earlier but I usually run my apps full screen so wouldn't have noticed.
I've reversed the wine multi-user configure, again using the recipe, and run `sudo apt-get purge wine1.2`, and logged off and on. The flashing and errors still occur.During logon there are bunch of indicator applet error message dialog boxes (which I'll post later after finishing this message and conducting another log off/on cycle). I'm running Ubuntu 10.4 LTS 32bit on an Acer Asper 3500 notebook. The install is about 2 weeks old.
When I run:Quote:mount -t davfs http://xxxx/webdav /home/USER1I get:Quote:Please enter the username to authenticate with serverhttp://xxxx/webdav or hit enter for none.
Username: USER1
Please enter the password to authenticate user USER1 with server
http://xxxx/webdav or hit enter for none.
[code]....