This worked fine in 9.04, but doesn't in 9.10 (fresh install).
If I tell my ssh-agent about a private encrypted key via "ssh-add .ssh/mykey" then everything works fine.
But if I log out and then log back in it's not there and there is no Gnome prompt to ask for the password to decrypt. So I have to do an "ssh-add" everytime I log in.
I have added an identity to ssh-agent
Code:
ssh-agent /bin/bash
ssh-add ~/.ssh/id_dsa
After restarting the machine. I removed all the identities by
[Code].....
Why I can't use multiple identities!
I have two sets of RSA key files:
I want two different SSH logins to the same server, so I create the following in ~/.ssh/config
Then in my server account on xxx in ~/.ssh/authorized_keys I have:
The idea is to use:
The latter as a transparent gateway to yyy through xxx.
Now this works just fine, but I have to remove either id_rsa or test! Why?
Can I user .ssh/config like this?
how an agent itself generate trap on some particular situation arises
View 1 Replies View RelatedI work on Linux Regression testing and I am writing a script to automate(shell scripting) the netperf tool when I need to determine the performance(throughput) of agent and client(individually) and I shall be running a shell script on (lets say) client first. But how to obtain the synchronization between them both as I need to execute a command even in board(agent) side to get the script going.
View 1 Replies View RelatedCan't connect to master agent: netstat -an | grep master gives me unix 2 [ ACC ] STREAM LISTENING 451121 /var/agentx/masterand if I run snmpd -f -Le -Dagentx I get:
agentx_register_app_config_handler: registering .conf token for "agentxsocket"
agentx/subagent: init_subagent sess 08052880
agentx_register_app_config_handler: registering .conf token for "agentxsocket"
[code]....
I have to fetch the information present in MIB of network agent.. i dont how to strat my program. pls text one sample program.
View 3 Replies View RelatedI have username1@domain.com and [URL] I want to send emails to two different groups of people and use a separate smtp server for each account so people that receive emails from username2 don't know about username1 account. At the moment I have to manually go into settings and change the default smtp server before I send the message. So I basically want to associate an smtp server with an identity. It doesn't seem that this is possible to do. I do know about the "Reply to Address" option but this is not what I want. For starters my smtp server won't allow this operation to take place.
View 1 Replies View RelatedAfter installing Ubuntu 10.04 on an nvidia dualmonitor system there is a weird behavior. Every program starts in the middle of the two dual monitors (overlapping both).
View 1 Replies View RelatedI've just installed 10.04 x64 and I've had some problems with samba (cifs/windows file sharing). It seems like samba is forgetting user passwords, so on every reboot I have to add a password for the user that needs access: sudo smbpasswd -a tietze
I've tried restarting samba (sudo service sbmd restart), but it does not work. I have to add a new password for the user with the command above.
I tried to google a bit for a solution, but only found the following thread with a problem that seems related: [other] Samba forgets user
making samba remember passwords betweeen reboots/shutdowns?
This occurred sometime in the past couple of days, perhaps because of an update that I just blindly accepted or due to some tinkering of my own. But for some reason, my gksudo never remembers the password I put in there anymore. When I sudo in a terminal it remembers no problem, and my sudo-via-terminal also responds to the "timestamp_timeout=x" variable in /etc/sudoers as it should. But does gksudo have it's own "/etc/sudoers" file where you can override the caching period for the password or does it reference the regular /etc/sudoers also?
View 2 Replies View RelatedThis occurred sometime in the past couple of days, perhaps because of an update that I just blindly accepted or due to some tinkering of my own. But for some reason, my gksudo never remembers the password I put in there anymore. When I sudo in a terminal it remembers no problem, and my sudo-via-terminal also responds to the "timestamp_timeout=x" variable in /etc/sudoers as it should. But does gksudo have it's own "/etc/sudoers" file where you can override the caching period for the password or does it reference the regular /etc/sudoers also? I have no clue where else to look....
View 7 Replies View RelatedI use Kubuntu 9.10. All packages are up-to-date. The problem: When opening a new window in firefox, the new window forgets the toolbar settings. So when I start firefox and the first window shows up, it shows my toolbar settings correctly, which is pretty minimalistic actually (no buttons, bookmark menu, google searchbar, etc.). But when I then open a new window from the original one, the new window has forgotten my toolbar settings and shows all the buttons, the searchbar, etc..
This happens irrespective from if I hit Ctrl+N, or print firefox after hitting Alt+F2 (which just opens a second window since the firefox process is already running). What can I do? I read in some other post that you should delete some settings file that might have gone corrupt, but I have done this and it did not help.
I'm using CentOS 5 on VMware workstation 7 for testing purposes. When I restart the VM it forgets all my preferences or other settings (keyboard(using azerty here), firefox bookmarks, even the desktop beackground) are reset. This happens with the root user and the default centos user. Is there something I'm looking over or is there something I can do about that problem?
View 5 Replies View RelatedEverytime I change my screen brightness from screen settings, the new brightness level stays for the current session only and then gets reset back to 100% every time i reboot my pc... What am i doing wrong?
View 3 Replies View RelatedI am using Fedora 12 with KDE4 and when I logged in to my KDE desktop for the first time, the screen resolution was 2048x1536, which was unusable for me. Therefore I set the screen resolution to 1280x1024 through the System Settings > Display in KDE4. However, whenever I log out and back in, the resolution falls back to 2048x1536. When I go to System Settings > Display to set it right, as soon as I click the Display button in System Settings, before changing any resolution, the screen falls back to the 1280x1024 setting
View 2 Replies View RelatedI am using debian testing and I am having a problem were miro forgets its location in a podcast. Also, I cannot jump to a new position in the podcast. I have tried the unstable version as well and it exhibits the same problems. I receive these errors repeatedly in the terminal while playing a podcast:Code:2011-01-02 00:10:27,311 WARNING get_duration: caught exception: query failed
View 1 Replies View RelatedI have two machines running Debian Squeeze (a laptop and a desktop). On my laptop sudo works fine, however on my desktop sudo doesn't remember my password for 1 second!!! I have created a script for the upgrade procedure with apt (to make things easier). The script is nothing more than a few commands separated by operators. It is completely useless if I have to enter my password six times while my script is running.
I tried to add timestamp_timeout=15 to the sudoers but it didn't help.
Does anyone have any idea why this could be?
I have just installed 11.2 i686 on two machines, one virtual and one physical. Both have been set to start in runlevel 3. For some reason it seems that my installations have missed some step in the process, because the system cannot find several rather important commands, eg. init and ifconfig.this is what I get if I try to run ifconfig:
Code:
user@computer:~> sudo ifconfig
sudo: ifconfig: command not found
[code]....
Installed OpenSUSE 11.4 with XFCE on MSI Wind U90. Unfortunately my RTL8187se buit-in wi-fi doesn't work.Finally found that driver r8180 works. After YAST2 configuration it worked, but after reboot stopped working. I've found that YAST2 forgets my manual configuration of the wifi card (forgets all settings).I've tried to remove card from YAST2 and configure again from scratch, but it forgets all my settings - mainly the module name - r8180, and without this driver network doesn't work!
View 3 Replies View RelatedHomePipe (www.homepipe.net) a site that lets you access folders on your PC remotely just came out with a Linux client.
I have successfully installed this on my Ubuntu 10.10 machine and it seems to be working well.
My problem is, I can't figure out how to have the agent autostart when I boot.
Currently, to launch the agent, I need to open a terminal, change to the directory where the agent is installed, then run this command:
I assume it should be fairly simple to add this to the Startup Applications, but being a noon I can't figure it out!
what exactly is SSH Agent as listed in Startup Applications? And can I safely disable it? I've read around a bit and get the impression is has to do with others connecting to my machine/network which is not an issue for me as I'm the only user, but I'm not clear.
View 4 Replies View Relateddoes anyone have any suggestions on the best way to start gpg-agent on fedora 13?It's installed just not running. Is there a Fedora standard way to use it?
View 2 Replies View RelatedI have installed dogtag PKI in my redhat machine using EPEL repo. I am only using CA agent right now. I have generated certificates for my Redhat Directory Server using this CA instance. Now by mistake, Admin Certificate which was stored in my web browser for Certificate based login inside CA Agent has been deleted. Now i can't go inside CA Agent. Is there a way i can go inside CA Agent?
View 2 Replies View RelatedI'm running OS X and it appears that after SSHing to several machines, using identity files, my ssh-agent builds up a lot of identity / keys and then offers too many sometimes to a remote machines, causing them to kick me off before connecting.
Received disconnect from 10.12.10.16: 2: Too many authentication failures for cwd
It's pretty obvious what's happening, and this page talks about it in more detail:
SSH servers only allow you to attempt to authenticate a certain number of times. Each failed password attempt, each failed pubkey/identity that is offered, etc, take up one of these attempts. If you have a lot of SSH keys in your agent, you may find that an SSH server may kick you out before allowing you to attempt password authentication at all. If this is the case, there are a few different workarounds.
Rebooting clears the agent and then everything works OK again. I can also add this line to my .ssh/config file to force it to use password authentication:
PreferredAuthentications keyboard-interactive,password
Anyhow, I saw the note on the page I referenced talking about deleting keys from the agent, but I'm not sure if that applies on a mac since they appear to be cleared after reboot anyhow. So, my question is, is there a simple way to clear out all keys in the ssh-agent (the same thing that happens at reboot)?
I installed Fedora 10 in text mode. Then I logged in as root and modified inittab to switch to GUI mode. I did not see any Setup Agent after the installation in text mode.
Now that I'm in GUI mode, I get the login screen, but it won't let me log in as root ("failed to authenticate user") and there is no Setup Agent to prompt me to create other users. I don't know how to get back to text mode, either. How do I login to the system?
I am using gdm to start awesome wm via .xinitrc.I like awesomes usability and gnomes integrity and so far most of the startup programs work fine but i am fighting with ssh-agent. When starting gnome my password protected id_rsa is automatically added to ssh-agent on startup.. i am trying to achive the same with my .xinitrc started awesome wm.My .xinitrc:
/usr/libexec/at-spi-registryd &
/usr/libexec/gdu-notification-daemon &
gnome-screensaver &
[code]....
i install cheops-ng-0.2.3.tar.gz on my fedra13,installation was ok,but when i press alt+f2 and type cheops-agent[the server],it won't run,there would be no process called cheops-agent,but when i run it in terminal i can run cheops-ng [the client],what is wrong?
View 1 Replies View RelatedI'm trying to watch TV shows off of ABC.com, ABC.com is sending back the following warning:
Code:
Platform not supportedYou appear to be using an unsupported operating system or Web browser. In order to use our video player, we require:Windows XP/Vista with Internet Explorer 6+, Firefox 3
Mac - Firefox 3+, Safari 3+
I think that this is bogus, and I probably need to switch my user agent so that it shows the correct version of firefox, but shows my OS as Windows XP/Vista or Mac. Here is the output of about:config showing all of the user agent strings:
Code:
general.useragent.extra.firefox;Firefox/3.5.7
general.useragent.locale;en-US
general.useragent.security;U
[code]...
As I understand it, these strings get assembled into the user agent header, which looks a little bit like this:
Code:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.1.7) Gecko/20100106 Firefox/3.5.7 I pulled this from Wireshark, after changing the user agent values above... obviously the changes that I'm making in Firefox aren't affecting what's going out over the wire. Right now, I'm in 'press and guess' mode... if someone can give me a better idea of how user agent strings are actually set in Firefox, what the individual values are, I might have a slightly better shot at figuring this out. This is, of course, only the first part of the problem. If ABC is using something proprietary to send out their video, I may still be out of luck...
Recently we are receiving lots of spam email specially ( Viagra). I want to use spamassassen to filter the spams so I need to configure procmail as local mail delivery agent.At the moment I am using prosfix for mail delivery agent and our server is Centos 5. I did google it but couldn't find a good instruction.
View 3 Replies View Related