General :: Configure Kmail To Use Different Smtp Servers For Different Identities
Feb 8, 2010
I have username1@domain.com and [URL] I want to send emails to two different groups of people and use a separate smtp server for each account so people that receive emails from username2 don't know about username1 account. At the moment I have to manually go into settings and change the default smtp server before I send the message. So I basically want to associate an smtp server with an identity. It doesn't seem that this is possible to do. I do know about the "Reply to Address" option but this is not what I want. For starters my smtp server won't allow this operation to take place.
View 1 Replies
ADVERTISEMENT
Aug 2, 2010
I have been faithfully following the postfix/sasl/etc install docs from [URL] and seem to have hit a minor snag with SASL authentication for SMTP. KMail cryptically leaves me with a generic auth fail notice and tailing the mail logs gives me
[Code]...
View 2 Replies
View Related
Oct 6, 2010
Where apart from ~/.kde4/share/apps/kmail does kmail keep account data, such as login data/names of pop/smtp servers? I wanted to install an entirely clean version of kmail, so I uninstalled/re-installed kmail via YAST. I manually deleted ~/.kde4/share/apps/kmail. After installing kmail I found that the account data of my Yahoo account were still listed in the kmail configuration panel. Shall I delete the Yahoo account within kmail prior to uninstalling the kmail package?
View 4 Replies
View Related
Jan 26, 2010
I've search high and low.. does anyone know how to configure Postfix/Dovecot to use another SMTP server (i.e. smtp.comcast.net) as my ISP blocks port 25?
View 2 Replies
View Related
Jan 14, 2011
We host our own mail server on our Fedora box. We would like for our field people using there smart phones to be able to send and receive mail. Receiving is no problem but sending creates problems with relaying and port assignments. Is there any way sendmail can be configured to allow these mobile phone users (AT&T, Verizon) to send mail through our server?
View 1 Replies
View Related
Feb 19, 2011
I'm trying to use different MTA servers (one for each domain) on the same public IP and port (25). Here I attach a graphic of my idea, to have a Postfix server that receives all incoming mail from internet, and relays to different local servers. esquema_mta-dns.jpg How can be configured the "Relayer MTA" ?
View 8 Replies
View Related
Feb 25, 2010
I need to setup a mail server, purely for relaying mail to a MS exchange server. A previous employee used Postfix on CentOS. I have limited Linux knowledge and no experience with any mail server software other than MS Exchange, so we cannot continue with this solution (unless I can find a way of managing it all from a gui). Does anyone know of an MTA that can be configured completely by GUI? Everyone says sendmail has millions of features and loads of documentation, but I simply do not have the time to learn it. I need something that can be configured with minimal knowledge and via GUI, not command line. The only reason I'm not using Exchange is to try to save money, and hopefully it will be more secure.
View 10 Replies
View Related
Mar 30, 2010
I want to know that by default do we need to configure SMTP and POP3/IMAP sever for sending and receiving mails in Linux server and client machines or we can directly send and receive mails without configuring these mail servers?
View 2 Replies
View Related
May 22, 2010
I am trying to configure Kmail with GPG. I followed steps described in [URL].
The official manual says:
Then click Modify > Advanced > OpenPGP Key
It will automatically go to the path of your gpgkey, that is ~/.gnupg
In reality: It does not automatically go anywhere, but provides a menu to change OpenPGP encryption key. When I click on the button to change my key it shows me a selection menu with my key in it. When I select it, the red cross appears on the icon near the key and the "OK" button remains grey, so I can not do anything. Did anybody try to configure Kmail with GPG? How do you configure Kmail to use your keys?
View 1 Replies
View Related
Mar 15, 2010
I have added an identity to ssh-agent
Code:
ssh-agent /bin/bash
ssh-add ~/.ssh/id_dsa
After restarting the machine. I removed all the identities by
[Code].....
View 3 Replies
View Related
Aug 26, 2010
I use my university email account and i want to save a backup of my sent emails in other account (gmail). So, is there any way to configure kmail to send automatically a BCC to my gmail account everytime i send an email, i mean, without having to write it everytime cause i forgot to do it sometimes.
View 5 Replies
View Related
Sep 2, 2009
Can anyone help me regarding SMTP configuration? I can able to configure and i can send mail from my domain to other domains but cant receive from outside domain
My question is what are the steps to configure SMTP...suppose i wanna configure SMTP server test.com and my hostname is ns1.test.com. so please mention the steps
View 1 Replies
View Related
Sep 29, 2010
I'd like to use the mail command to send e-mails with some log files. Is there a way to configure the SMTP server from cli or to write the IP address into a file?
View 6 Replies
View Related
Jan 31, 2010
I have scalix (sendmail) installed on my server and it is working very good but I need to change the smtp listening port because I am thinking that my sendmail is being used as a spam engine.
what/how I need to configure in order to change the smtp port?
View 3 Replies
View Related
Apr 19, 2010
It seems my sendmail (running in slackware 13.0) cannot send out emails correctly. I guess I need to tell it what is the smtp server to use. And, I heard, gmail's smtp server is available to use for this purpose. How to configure my sendmail this way?
View 14 Replies
View Related
Dec 29, 2010
# uname -a
Linux newserver 2.6.18-194.26.1.el5 #1 SMP Tue Nov 9 12:54:40 EST 2010 i686 i686 i386 GNU/Linux
The configuration file for mutt (.muttrc ) :
root@newserver ~]# cat .muttrc
set from = "kostas123@gmail.com"
set realname = "Kostas xxxxx"
set imap_user = "kostas123@gmail.com"
set imap_pass = "xxxxxxxxxx"
set folder = "imaps://imap.gmail.com:993"
set spoolfile = "+INBOX"
set postponed ="+[Gmail]/Drafts"
set header_cache =~/.mutt/cache/headers
set message_cachedir =~/.mutt/cache/bodies
set certificate_file =~/.mutt/certificates
set smtp_url = "smtp://kostas123@smtp.gmail.com:587/"
set smtp_pass = "xxxxxxxxxx"
set move = no
set imap_keepalive = 900
root@newserver ~]# service sendmail status
sendmail (pid 6428) is running...
root@newserver ~]# mutt
Error in /root/.muttrc, line 8: header_cache: unknown variable
Error in /root/.muttrc, line 9: message_cachedir: unknown variable
Error in /root/.muttrc, line 11: smtp_url: unknown variable
Error in /root/.muttrc, line 12: smtp_pass: unknown variable
source: errors in /root/.muttrc
Press any key to continue...
Mutt can only read email's from my gmail account, but no emails can be send through gmail to the Internet. I need some guide for Mutt , don't know how to configure it , for sending emails via my gmail account. I tried many muttrc conf files from the Internet and even tried to configure my own muttrc file , but still no luck. My windows xp box ( Outlook Express ) is configured and works with gmail account , but I would like to explore the power of Linux.
View 3 Replies
View Related
Oct 23, 2010
Try as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at:
[code]....
I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
[code]...
I get basically the same error no matter what smtpserver/username/password combination I use leading me to believe its my setup and not my username/password
View 1 Replies
View Related
May 5, 2010
Try as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at: [URL] I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[Code]....
View 5 Replies
View Related
May 25, 2010
I'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
View 2 Replies
View Related
Mar 4, 2010
Why I can't use multiple identities!
I have two sets of RSA key files:
I want two different SSH logins to the same server, so I create the following in ~/.ssh/config
Then in my server account on xxx in ~/.ssh/authorized_keys I have:
The idea is to use:
The latter as a transparent gateway to yyy through xxx.
Now this works just fine, but I have to remove either id_rsa or test! Why?
Can I user .ssh/config like this?
View 1 Replies
View Related
Jan 20, 2010
This worked fine in 9.04, but doesn't in 9.10 (fresh install).
If I tell my ssh-agent about a private encrypted key via "ssh-add .ssh/mykey" then everything works fine.
But if I log out and then log back in it's not there and there is no Gnome prompt to ask for the password to decrypt. So I have to do an "ssh-add" everytime I log in.
View 4 Replies
View Related
May 31, 2011
I run a 6.06.2 Dapper server for a not-for-profit, and have had a very simple email set-up working for a couple of years. Users have their email address set up on the server, and use a gmail account as webmail access/storage. Emails are downloaded via POP to users gmail accounts, and are sent out from gmail via SMTP to the server. Like I said, this has worked fine for ages, but in the last couple of days its all gone wrong.
The SMTP log I get for an email I tried to send from gmail is as follows:
[Code]...
View 3 Replies
View Related
Sep 28, 2010
I want to allow all IPs to use my SMTP server running postfix. what should i write in mynetworks section?
View 4 Replies
View Related
Jun 29, 2011
I've tried googling this, and am having trouble finding something that doesn't end up being dizzying or confusing.
I was wondering if anybody could provide me with a concise, conclusive answer/guide.
I have a set of servers which require redundant SMTP relay. The first two of their SMTP relays are their own SMTP servers, and as such, are not dependable in the event that their network/servers go down. Their monitoring software runs on their machines as well, and uses the SMTP servers they themselves host.
I need to set up an external SMTP relay box that they can use to relay their monitoring alerts/admin notices in the case that their mailservers go down.
I have a company exchange server with pop/imap support @ my disposal but, unfortunately, that box runs Windows and does not permit any changes to services or additional software to add for the purposes of relaying clients.
So now, I need to create a dedicated linux box that can act as a relay to send email coming from the monitoring/admin/alert software in case their first two smtp servers have gone down.
View 6 Replies
View Related
May 22, 2011
It seems I can't access smpt servers both from kmail and php. Kmail says
Code:
Sending failed:
smtp.gmail.com
The message will stay in the 'outbox' folder until you either fix the problem (e.g. a broken address) or remove the message from the 'outbox' folder.The following transport was used: ... I double checked my settings and they are correct. I can ping smtp.gmail.com. I can send emails using thunderbird on a windows box that is connected to the same network as I am.I also tried turning off the firewall through yast but no joy.
View 1 Replies
View Related
Apr 7, 2010
I've got a server running 9.10, and I'm having a few issues with SMTP. It's got Postfix and Dovecot installed, and eventually I'll add content filtering, but I need to get past this issue first.
I know there's a lot of posts out there for Postfix issues, but I haven'tbeen able to find one specific to my issue.
IMAP and POP3 work fine through SSL, and the server can send mail without any problems. That's all fine and dandy, but I need to utilize an e-mail client (like evolution or outlook). Everytime I set up a user in Evolution, the smtp connection times out, or is refused. I know it's not a firewall issue. Port 25 is open, as well as 465. So I should be able to connect through SSL. I want to be able to connect through SMTP using the same credentials as IMAP.
Here's my main.cf file:
Code:
myhostname = mail.adamwgay.com
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
[Code].....
everytime I get things rolling, this issue pops up. I don't know if it's something I'm setting up wrong in the client, or if it's a configuration error on my part in postfix.
I'm also having a bit of an issue with my aliases. I've basically got a lot of addresses going to root, then root going to the main user, but it's not actually delivering the mail to the main user. It sends it straight to root.
View 9 Replies
View Related
May 26, 2010
I have just built an internal postfix server for sending mail only, it's not accessible outside our network. I will be sending from our domain, Rewriting the from field to abc.com is turned on in the postfix config. A friend is telling me this will not work as they will do reverse lookups on our domain. What does this mean? Obviously the domain the email is sent from is a valid domain. If they do a lookup from the IP the mail came from it would be global crossing, our internet provider? These outbound emails are critical client reports, I want to make sure they are not seen as spam.
View 1 Replies
View Related
Nov 13, 2010
I have a server set up with a VPN (openVPN with DynDNS). My emails are located there and I can check them from home, office, where ever really, with different computers, no problem.However, due to restrictions of some ISPs I would have to change the SMTP server used, depending on where I am with my laptop.
Now, I thought about using the VPN to also tunnel the SMTP traffic through that. But how am I doing that?So far, when I'm connected to via VPN I simply have a local (from the server point of view) IP address to connect to my IMAP server. But how can I route the SMTP port 25 through the VPN?Is that possible to do, also in a way that I don't have to change anything depending on where I am, as in within the network of the server or outside? Since when I'm within the network the VPN obviously isn't connecting..
View 7 Replies
View Related
Jan 2, 2011
I am setting up an ubuntu server, in order to use it with Joomla.
Does someone knows if is possible to use PostFix as SMTP server for Joomla?
If does; would be necessary to install IMAP or POP3, Webmail etc if I just want to send automatics mails via Joomla.
View 3 Replies
View Related
Jun 15, 2010
I am new to the Ubuntu Community and just starting to build my Ubuntu 10.04 Server. I am a novice in Ubuntu, though maybe not a full n00b any more
I travel around a lot with my laptop, (also Ubuntu 10.04). However, my ISP does not allow me to send email via their SMTP when I am not in their IP range.
Since I have this little server I am building, I thought it would be nice if I could have my own SMTP relay. The objectives would be simple:
- I do not need a mailbox or POP server (yet).
- I wish to send email from any place in the world. I can not use a filter on IP ranges or local networks only.
- If my server could do this, I just configure Evolution on my laptop to send mail to my home IP address, using some sort of authentication and/or security/encryption (whichever is easy to implement).
- My server then just forwards my mail to my ISP. Since the server is inside the IP range, it can be handled as usual.
I have been digging through several howto's and the ubuntu server guide, searching some forums etc. Even while I don't fully grasp the things explained, I can't get the idea that one of those is "Just what I need".
Even still, if there is some other service outside my own that can do this (a public SMTP relay maybe?) I would also be happy to consider as long as it is safe and does not "eavesdrop" on my messages.
View 3 Replies
View Related
