Everytime I change my screen brightness from screen settings, the new brightness level stays for the current session only and then gets reset back to 100% every time i reboot my pc... What am i doing wrong?
View 3 Replies
I Install Ubuntu 9.10 and I can't control Brightness, show brightness popup (Fn+F5F6) but screen brightness don't work, I install NVIDIA Driver Linux-x86_64 version 190.53, modiffed xorg.conf.
View 9 Replies View RelatedI am using Fedora 12 with KDE4 and when I logged in to my KDE desktop for the first time, the screen resolution was 2048x1536, which was unusable for me. Therefore I set the screen resolution to 1280x1024 through the System Settings > Display in KDE4. However, whenever I log out and back in, the resolution falls back to 2048x1536. When I go to System Settings > Display to set it right, as soon as I click the Display button in System Settings, before changing any resolution, the screen falls back to the 1280x1024 setting
View 2 Replies View RelatedI'd been trying to get into Linux before I bought it so I figured that I would try to get it onto my new Mac so that I could use it wherever I am. I decided to try Debian Lenny 5.0.3 a whirl after reading about all the different distros available. I've successfully installed it and I can get to it with rEFIt, and I have quite a few things working such as the video drivers and wifi. However, I've had trouble getting it to a level where it'd be usable away from home. Here are the main problems I'm worried about:
1) I installed pommed but I still can't use the brightness keys to change the screen brightness. I'm not sure if there's some other workaround for this?
2) I tried some recommended power management packages (gnome-power-manager) but it doesn't seem to be accessible or functional right now. I don't have any way to control it or get to it that is obvious to me. Is an icon or anything supposed to appear on the task bar when you install or what? Getting some sort of power management on here is important because it gets really lousy battery life otherwise.
3) Being a Macbook, there's no right-click button. Multitouch would be really nice (two-finger scrolling!) but I'd be OK with ANY way to right-click with the touchpad. I have a wireless USB keyboard/mouse combo that works at home at least . . . right out of the box too!
4) I've seen some packages called the Mactel PPA, but they are made for Ubuntu. Since Debian and Ubuntu are so similar, is there any way to make those work on Lenny? I think that if I got those to work, I could fix some of the problems above. Or do I have to install Ubuntu?
5) I just noticed that the sound doesn't seem to work yet either.
I'm having trouble locating a way to adjust the screen brightness on fc10... It is only possible to use the monitor's control for now.Yeah my monitor make an annoying whining noise unless you turn it on 100% brightness, but that hurts my eyes.It is so crazy that they didn't put a brightness control in! ( or rather they destroyed working ones of year past, Why? )
View 4 Replies View RelatedMy issue is like this: I have a laptop (dell vostro 1400, NVidia 8400M video card) running Fedora 12 up to date. My desktop is KDE 4. I usually run the laptop connected to the power outlet, so my power profile is set to "performance". This power profile sets the screen brightness to the maximum. However, when I'm in the dark, I want to lower the screen brightness. The shortcut keys work, and the screen brightness is lowered. However, for some reason, after about 30 seconds it resets itself to the highest brightness setting. No matter how I set the brightness, it will always reset itself. Any ideas what can i do to correct this?
View 3 Replies View RelatedRunning F14 on Dell Studio 14 with LCD screen and US keyboard selected. After initial power on the keyboard selection of "Windows Key" + F4 will dim the screen and the "Windows Key" + F5 will brighten the screen. When being used, either combination will also show a meter on the screen to display the adjustment of the brightness. When the lid is closed the computer is set to suspend by default. After the computer is brought back from suspend the keyboard short cuts no longer control the brightness and the meter does not appear on the screen. I have not found any other way to control the brightness and I have to restart to get the keyboard short cuts to work again.
View 5 Replies View RelatedAfter installing Fedora 14, I can't seem to make my screen brightness go above the absolute minimum. I've tried editing /proc/acpi/video/VGA/LCD/brightness to change the current setting from 20 to 100, but I can't save it, even when logged in as su, it returns "Invalid Argument" when I try to enter the filename of where to save. What do I do?
View 9 Replies View RelatedI recently switched from Ubuntu to Fedora and had this screen brightness issue with my HP Pavilion dv3 notebook. The brightness is so blinding and I cannot adjust it.Fn keys works and responds but the screen stays the same.
View 9 Replies View RelatedI have Fedora 15 gnome 3 installed on my new laptop. When my system runs on battery my power management keeps changing my screen brightness. It keeps dimming my backlight. In the GUI of Power Management I cant find any option to change this setting. How can I do that through Command Line
View 4 Replies View RelatedI cannot adjust the screen brightness in the power management menu. I can access the window and move the scroll bar, but there is no change.
I am on v 10.04 32bit , a Benq joybook s35.
It was working just fine on the previous version of ubuntu.
My computer (Samsung R580 N330M)seems doesnot adjust brightness both power manager and configuration file in /proc, I tried NVIDIA setting and it works,but I think it changes the color,not LCD. is it caused by driver problems?
View 3 Replies View RelatedI have a low end 7" CnMBook running modified Debian OS. Is there any way to adjust the screen brightness, if possible by adding a Fn command Up and Down?
View 4 Replies View RelatedWhen I first install debian I couldn't change the screen brightness at all not manually nor with function keys, but I tried some of the solutions I found on the internet and now I can change the brightness manually (from the power management or the battery icon) but when I use the function keys it takes them like 2 to 3 minutes to respond and cause the system to hang (even mouse curser not responding) and then I'm forced to manually reboot the system, here is some information :
Code: Select all$ ls /sys/class/backlight/
acpi_video0 intel_backlight
Code: Select all$cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] .....
And I've tried this:
Code: Select allsudo -i kwrite /usr/share/X11/xorg.conf.d/20-intel.conf
And I add the following in this file
Code: Select allSection "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
I've an asuspro (more precisely the p2520la version) notebook with the fn+f5, fn+f6 buttons that should change brightness of the screen. But they don't work. For volume it's ok (fn+f11/f12), and if I go in the system settings I c an change manually the brightness (I use kde so there is a bar with which change it). But when I'm outside and the screen brightness is low I found difficult to find the menu settings and the hardware buttons would be better.I've tried adding to the kernel the "acpi_osi=" command but doesn't work.
View 0 Replies View RelatedMy laptop with Ubuntu 9.10 just randomly while adjusting the brightness using the shortcut key commands on my laptop the brightness started to glitch between two brightness levels. If I don't use the shortcut keys it doesn't glitch unless I shut the screen or restart the computer. So I've had to put up with this for the past couple months now and I think that it might even drive me to reinstall but then I lose all my data.
View 3 Replies View RelatedIn which configuration files can I manually set the default screen brightness?
View 6 Replies View RelatedSometimes, out of the blue, my screen will suddenly change brightness. And no, not the gnome power manager dimming the screen when idle, I'm talking about it suddenly going from dimmest to brightest when I haven't even touched the screen brightness buttons in the last few minutes.
what package would I file this bug against)? This is Maverick on a thinkpad T60, and I can provide any other information that people find relevant. On what may be a related note, it seems that one push of the screen brightness up or down buttons causes two increments in brightness.
I originally installed Maverick on my Macbook 5.1 using rEFIt to dual boot. For some reason, after installing Compiz my screen brightness functionality stopped working. It was permanently 100%. I thought that upgrading to Natty might work, but no luck. So far I've tried changing the brightness manually in terminal and in power-management, editing the grub file and also reinstalling compiz, all to no avail. Trying to alter brightness using the fn keys displays the brightness panel in the top right, and it decreases in value as it should, but the screen stays bright. The brightness settings work fine when I boot to Mac.
View 9 Replies View RelatedI installed Ubuntu Natty on an Ideapad Z570. The screen brightness seems to be stuck. The keys that control brightness don't work and I can't find any option anywhere to change it.
View 1 Replies View Relatedon my fairly new ubuntu install (10.04.1 LTS) on a laptop, the screen brightness changes seemingly at random, i.e. while I do other things like surf the web. Often, the brightness will decrease some (it does not fade to black as reported by others with similar problems) and come back a few seconds later
View 1 Replies View Relatedi had slackware 13.0 on my dell vostro 1320 and it was all good, but since the upgrade to 13.1 i cannot change the screen brightness with ctrl+up and ctrl+down keys..i'm not even sure how to start with this problem. from what i understand these keys 'call' a bios function...? so that would mean that some kernel module is not being loaded?or has the desktop environment lost the key mappings and that is causing my trouble?
View 1 Replies View Relatedif there is a way of selecting a specific area of the screen and increase brightness? The thing is that I had to reduce my monitor brightness and contrast, due to recurring headaches. The new configuration is fine for most applications, but videos on web pages are too dark. I have created a script that allows me to change nvidia settings quickly, but when switching to the brighter setup my eyes hurt even if it is just for a moment. So I would like to be able to brighten a specific area of the screen.
View 2 Replies View RelatedI have a netbook with LED backlight, but even the lowest brightness of the screen is still very bright and eye straining in a dark environment. On Windows and MacOSX there are simple tools that put a borderless more or less transparent black window in front of everything on the screen to reduce brightness even further.Are there such tools for Ubuntu or other means of achieving the same result?
View 4 Replies View RelatedI bought a Asus eeepc a few days ago which I really like, with the exception of one thing - windows 7 starter. I like Windows 7, but starter is just bad. I also really like ubuntu, so I've decided to put it on my netbook. I download the netbook edition from the site, put it on a usb drive, and than tested it out - well, my screen is dim, very dim. Changing the brightness setting on the tool bar up top doesn't change anything, and using the function keys does change it, but still keeps it very dim.
I've tried restarting my computer, same thing, I've tried messing around with settings in the battery options, nothing... I really don't want to install it if its going to be this dark, I can see things, but its not very pleasant to use. I'm starting to consider that its the problem with the file I downloaded. Theres nothing wrong with my netbook, everything worked perfectly fine in Windows 7. I use the full version of ubuntu 10.04 on my other laptop which works perfectly fine, I'm not sure why this version is acting so weird on my netbook.
I am using Ubuntu linux, and I want fn + up key and fn + down key to change the brightness instead on fn + F4 and fn + F5. I've tried looking for something in the Keyboard Shortcuts menu, but there is no command or key specified to do that. I could make a custom key shortcut, but I can't find the command to change the brightness. Is there a way to make another key do this? My laptop is a Dell Inspiron 1545.
View 10 Replies View RelatedI have come to the conclusion there is no way to adjust brightness for this iMac besides xgamma tweaking.Can someone explain why it is not possible?
View 1 Replies View RelatedLong, sad story made short. I have a Samsung Netbook running Windows XP Home, SP3. I set it up to dual boot with Ubuntu, just so I could play around with Ubuntu. Well, Ubuntu started giving me trouble: my internet connection went south, I was unable to adjust the brightness of the Netbook screen, etc., and when I looked for troubleshooting help on the internet, it was all Greek to me as it involved working with Terminal.
I did a search for removing a partition in Windows XP and found "How to use Disk Management to configure basic disks in Windows XP" on the Microsoft and followed the instructions there.
[Code]...
I have searched online with no success. The brightness control is working fine on my laptop. Problem is that the bars don't get rendered on screen. Instead I get like a static white line on screen everytime I press the brightness control. On boot however, I can see the correct bars. It is once I start my xsession, the bars do not show up. Here are my specs:
Slackware 13
Xorg Radeon driver
kernel 2.6.29.8
I'm having a really strange problem, when I turn on openSUSE, the brightness is fine.owever, as soon as I log in the brightness gets obnoxiously low. I have a MacBook Pro 7.1 with openSUSE 11.4 KDE
View 5 Replies View Related
