Is it because there are some ADSL routers/modems whose WAN ports are RJ45 instead of RJ11? Or is it because a cable like that would allow me to use an Ethernet adapter to connect directly to my ISP? I would like to know if the second one is possible, I can't afford a PCI ADSL Modem card right now.
View 1 RepliesI'm looking for a router than has an RJ45 WAN interface, and at least 2 RJ45 LAN ports.It also needs to have WPA-AES capability and an SPI based firewall.i saw this one but was a bit concerned about the 3G 'tag' in its name. could i safely assume it will function as a normal router?e.
View 6 Replies View RelatedI have a friend with an old, still-working laptop that wants to switch to linux. (Dell Inspiron 7000 PII) I loaded Lubuntu because it's an old machine and has only 512MB of memory. The laptop has no built-in ethernet or wireless. As the title says, he has an EC2T card with it. I've tried to get lubuntu to recognize the card but it's a no-go. I tried the EC2T card on a Windows laptop at my workplace and Windows recognized the card immediately; I was able to surf the web with it.
It looks like at one time it worked with [URL]... and that individual didn't get an answer. Other troubleshooting I've done:I've ran the 'Hardware Drivers' utility and it found no drivers. I tried lspci and the EC2T card isn't listed. I tried a wireless pcmcia card from my workplace and it worked so the laptop's card slot is functioning; lspci does list the wireless card.
Just bought one of these motherboards (also named IN73M-PVAOGH2LF), but reseller didn't supply a manual. Nothing is printed on PCB, indicating connector functionality, so i'm looking for info on stuff like power switch and HDD-led connector placement.
Facts:
Socket 775, DDR2-6400 (2 modules), onboard nVidia 7100/nForce630i
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
PC A - Ubuntu Desktop 9.10
PHP Code:
eth0 Link encap:Ethernet HWaddr 00:16:d4:99:91:61
inet addr:169.254.0.1 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
After connecting them with cable nothing happened. Light didn't flash. How to fix it? Aim is to be able to access PC B using FTP and SSH.
I have a multi-function printer/scanner that plugs straight into the LAN via RJ45. Printing works fine, but I'm not sure how to proceed to set up the scanner. Just to be clear, I am not asking about connecting a usb scanner then sharing it over a LAN, that's different. This scanner plugs straight into the LAN.
View 5 Replies View RelatedI have to connect from my linux client laptop to SPARC machine by using roll-over cable and RJ45 interface on the server. On windows I always used Tera Term but don't know how to accomplish this task from linux laptop.
Is there some kind of app like TeraTerm on linux too ?
I have 2 pc with Asus AMD boards (M4A87TD Evo and M4A88TD-M Evo) running OpenSuse 11.3.on both the front panel audio headset + mic do not work.on one PC I have an other OS also installed, so I know that on this machine the hardware is working.is there a chance to get the frontpanel audio connectors running with the actual openSuse or do I have to wait for the next version with a newer kernel/alsa version?
View 6 Replies View RelatedI just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedI have just purchased a HTPC - cheap purchase pre-built from ebay - ideal size - small box - not too out of place in the lounge.The HTPC has one rj45 connection built on to the mobo, with a wireless card + aerial in the back (wireless broadband) and I am going to take the dtv card out and replace it with anothe rj45 card.I intend to run ubuntu server 10.10 on the server and I intend to connect my sky broadband through the server to give me the security of a server based firewall and the security of the server as a whole.
View 5 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedMy modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies View RelatedI have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies View RelatedI'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk
Username: user
Password: pass
I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
i m able to change mode to usb modem device 9603 Micromax 300 G USB modem.
but still got stuck with
bharat@ubuntu:~$ sudo modprobe usbserial vendor=0x1c9e product=09603
FATAL: Error inserting usbserial (/lib/modules/2.6.31-14-generic/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
how to run my telstra next g usb modem in ubuntu 10.4?
View 4 Replies View RelatedI have a USB modem working in windows. But no luck to connect using Ubuntu 10.04.
I have setup usb-modeswitch and other stuff. The modem is attached to port ttyUSB0. But when i run "sudo wvdialconf" it displays message like this.
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
read the FAQ at [URL]
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
organize networking with usb 3g modem in my Ubuntu Server 10.04. Or give me any links how to do it.
View 1 Replies View RelatedI am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
I am trying to set up one home networking lab in which I plan to use three routers. One of the router will be QUAGGA over Ubuntu Server. I cannot figure out how to setup my HSIA USB Modem (TataPhoton+ from Tata teleservices)in ubuntu server. This device works fine with Ubuntu 9.10 desktop edition. Just a few clicks in network manager does the job, but how to achive the same in ubuntu server which have no GUI
View 1 Replies View RelatedSteps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I use ubuntu 9.10 and PCI connected Conexant CX11252 Modem. My GNOME PPP doesn't detects my modem. How can I create a connection? Is there any way to detect my modem and connect ? or ubuntu is fit only for broadband? I think most of the activities in ubuntu depends on internet. I can't do any work. I am losing my money in Internet Cafe. Broadband is even not available in my resident area. Therefore. find a solution to connect internet via my dial up modem!
View 9 Replies View Related