I've just upgraded from Ubuntu 8.4 to 10.4 and suddenly no internet access, but I'm able to ping as above. I've been using Ubuntu for about a year now but don't know it all that well "under the hood" so don't know where to start looking for a solution.
View 5 RepliesI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
I can ping my router, i can ping google and i can ping the ip address you get in the ubuntu help.If i type 192.168.1.1 i can get my router control panel/i just cant connect to the web,
View 1 Replies View RelatedI have a Compaq Presario R3000 with Ubuntu 9.10 32 bit that I just installed last night. I'm using a Zyxel G-102 Wireless card and Actiontec GT701WG wireless modem.
When I try to connect to the 'net, the network does show up and it connects strong (100%). It also shows multiple neighbors networks. It pings at 99% success (with over 900 sent as I write this) but when I open Firefox it can't connect, it just times out. I've used WEP security and have switched off security as well. I tried hooking up to the modem via USB and get the same result. It acts like a Firewall issue but there isn't one installed - at least that I can find and the Firewall in the modem is off. I ran FF in root with gksu firefox as suggested in another thread. I tried www.ubuntu.com and the header loaded but that was all. Then it timed out.
I'm new to Linux but have used Puppy Linux with this machine and card, etc. so I know it can/does work with Linux. I wanted a more refined distro and chose Ubuntu.
My Internet Router is on 64.1.1.1
I have 2 NICs in my Linux Box: (Firewall OFF)
Eth0 -> 64.1.1.2 and cross-cable connected to Internet Router (64.1.1.1)
Eth1 -> 192.168.1.1 Connected to switch hub
Default gateway of Eth0 is to Internet Router (64.1.1.1)
From Linux-Box.. I able to ping to internet(ie. ping 202.158.3.7)
Client PC: (Firewall OFF)
Default Gateway is 192.168.1.1
I am unable to ping to internet (ie. ping 202.158.3.7)
I've got Ubuntu 10.04 on my laptop and have recently (within the last 72 hours) started having trouble connecting to other machines on my local network. I'm unable to ping both my router and a server set up in the room beside me.
1. I have tried pinging my server and router from other machines and it works fine. Accessing the server via HTTP works from all machines except for my laptop.
2. I am, however, connected to my router via wireless and can access the internet. Also, if I connect via an ethernet cable I am able to ping both my server and router, although I'd love to be able to go wireless.
3. I assume something's wrong with my wireless setup, but I really can't figure out what. Possibly related note: my wireless has been disconnecting unpredictably on my home network (WPA).
Let me know if you'd like to see any command output and I'll get it to you asap! I've got a Dell Studio 1558 w/ the dreaded Broadcom BCM4312 wireless controller.
Code:
user@blue-skies:~$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
[Code]......
I'm using FC10 on my box at work. It is behind an anthenticated proxy for internet connection. In Gnome, I configured the Network Proxy through the GUI, as my browsers too.
So I can browse internet pages, install packages thru Add/Remove Software GUI, but I cant do it in the command line, using yum install, for example. Then trying to figure it out, I saw that it cant reach the package mirrors. It isnt a DNS problem, I set the /etc/resolv.conf correctly, as the host command works correclty. I can ping the local pcs on the network too. Firewall is disabled. Below some simple tests:
[rtovo@davinci ~]$ ping mirrors.fedoraproject.org
connect: Network is unreachable
[rtovo@davinci ~]$ host mirrors.fedoraproject.org
mirrors.fedoraproject.org is an alias for wildcard.fedoraproject.org.
[Code].....
I just downloaded and installed the latest Cent OS 5. I disabled SE linux, turned off the firewall, and selected the Server package options when installing. I plan on using this as a router/firewall between my internal network and the internet, as well as web server, etc. The first thing I did was to configure the two NICs, internal one with 192.168.7.1 address and the other with an address from my ISP (I have a static address, but I also tried to let the DSL router assign an address via DHCP). Everything looked fine, I checked /etc/resolv.conf and my routes. I was able to ping the DSL router from the server, but I was not able to do a ping or lookup on anything outside my network. I tried host, dig, nslookup, etc, no luck. Obviously then, I was not able to browse the net with firefox.
View 4 Replies View RelatedMy server was working perfectly.
My other uses on on LAN can access Internet but Cant ping the server.
Though they were able to do that earlier.
No software installed. No change in any files.
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies View RelatedThis morning my Ubuntu 10.10 Meerkat desktop suddenly lost internet connection, but stayed connected to my netgear router. After the usual "tried turning it off and on again" methods didn't work, I booted into my Win Vista partition to find that connected no problem. I have another Ubuntu netbook and a Windows 7 laptop in the house as well as an Android. These all connect fine. It appears to be just the desktop Ubuntu.
I can ping my router 192.168.0.1 and log into it's UI via browser. I can also ssh to the box. My router does not do any filtering or blocking. I've tried disabling the firewall and changing the nameservers in /etc/network/interfaces and dhclient.conf as well as the network manager. The network card is a Belkin 54g but I can't remember the exact model no. it was bought years ago.
Code:
$ping www.google.com
PING www.l.google.com (74.125.230.115) 56(84) bytes of data.
^C
--- www.l.google.com ping statistics ---
30 packets transmitted, 0 received, 100% packet loss, time 29004ms
Code:
$traceroute 74.125.45.100
traceroute to 74.125.45.100 (74.125.45.100), 30 hops max, 60 byte packets
1 * * *
...continues to...
30 * * *
When I do a restart of the networking service it spits out the error:
Code:
Ignoring unknown interface wlan0=wlan0
However, as I said the wireless itself works.
/etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
iwconfig:
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"haters gonna hate" .....
I'm running Lucid (10.04), dualboot vista, but I'm having some issues with my wireless USB dongle. Previously (in a different) location, the network wasn't showing in my wireless network tab, and that was never resolved. But now I'm in a new place, and what I'm finding is that my network is showing up in the networks tab, and I can select it, enter the PSK, and it starts to interrogate, but never seems to manage all the way through to getting internet.
Im not sure whether the machine is able to connect to the network, but not the wider internet, or what. The only indication I'm getting is that its connecting for a length of time, then gives up. I have managed to get the update tool pop up - so I'm not sure if thats an indicator of some internet connection or not (presumably it only generates the list of packages to update when it can connect to the net and see what updates are required...) I believe its also managed to get 1 or 2 ping packets through to the internet. I'm driving a belkin N-wireless USB adapter, N10117.
So I installed 10.4 on a new Toshiba Satellite L645DWhen I connect to my wireless at home, the Network Manager shows that I am connected but I can't reach any websites via ping or firefox. I also can't ping my router. I also don't have wired access working at all.iwconfig shows connected to correct ESSIDI can ping localhostcan't ping google:
Code:
ping: unknown host www.google.com
can't ping my router (192.168.2.1):
[code]....
I am using centos box as a router. WAN side has a public ip and lan side also using a public ip. I configured dhcp server on the LAN side and it is working perfectly, pcs on the LAN side can able to access the internet.
Problem: Considering the fact that LAN IPs is using Public IP and it is presumed that from the internet it can be able to ping IPs inside the LAN but, alas, it couldn't.
No firewall has been config!
Question: What config should be done on the box so that IPs inside the LAN can be ping from the internet?
I posted this already in the absolute beginner section, but no answer was found, so I thought I might try this place..Long story as short as possible:
- I installed Ubuntu 9.10 for a friend who was fed up with WinXP crashing all the time
- After the install, networks was broken. I could ping sites outside the LAN, could connect to the router via firefox, but NO application could access the web. - The router works just fine, I tried with my own notebook.
- Disabling ipv6 in grub (edit /etc/default/grub and 'sudo update-grub') seemed to solve the problem.
- Then update the standard packages + install restricted extras and boom, Network gone: No ping to sites outside the LAN, no nothing. Still can connect fine to the router and even the remote desktop connection works, connecting over the internet. But that's it.
I have tried setting the mpu to a value recommended by my isp, I have set static ip and dns, I really don't now what to try any more.
In Fedora 14 (kernel 2.6.35.10-74.fc14.i686) I am not able to get an internet connection on my laptop via mobile broadband. However dialing succeeds and the provider starts the daily flate rate accounting.I tried the graphical network management as well as wvdial and even sakis3g (achitecture free variant from URl...).With wvdial (well configured I think) and sakis3g the dial connection is established (permanent blue light on Huawei E169). "netstat -ie" shows that the network configuration has changed (device pp0 instead of eth0 and "netstat -rn" shows that default router is set to 10.64.64.64). But "ping" does not receive data from any internet IP address and browser cannot render any website. A later check call of my prepaid balance said that the daily rate countdown was initiated (so I pay for nothing).
The GUI of the KDE network icon seems to work similar but does not set the usb key into the connected state (only blinking blue light and break-off after a few seconds).Disabling of selinux didn't change anything as well.With Mandriva 2010 I didn't have any problems with same mobile key and provider.
I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.
ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99
[code]....
I know this is not a win-doze forum but i always ask my questions here so here goes.I am having what appears to be a DNS problem on a friends laptop. He is running windows XP. I CAN connect to networks and even ping websites but i CANNOT browse in Internet Explorer or FIrefox.
View 1 Replies View Relatedwe are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
I have 2 10.04 computers and one win 7 and one vista computer: The win computers can see each other and the ubuntu computers, but the ubuntu computers cannot see each other or the win machines. The ubuntu computers connect to the internet fine and can ping each other. I cannot find settings to correct.
View 3 Replies View RelatedI have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies View RelatedIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View RelatedI just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
I'm a pretty new ubuntu user and I've just upgraded from 10.10. It seems to be working pretty well, except that I can't figure out how to connect to the Internet.
View 2 Replies View RelatedUbuntu 10.10 offered me a partial upgrade, so I clicked to install the updates. No problem, everything went fine.
Then the next time I boot ubuntu, internet doesn't work. The loopback interface is active, but the ethernet interface is not.
I've googeled for a solution, but can't find any.
This is the second time in 1.5 week. The first time I rebooted ten times or so and internet just suddenly worked again.