I've signed up with a hosting company and have access to logs of visits to my website. How can I process these logs to obtain the geographic location of visitors from their IP number? If there's a way of bash scripting this, it would be ideal, or a dedicated softare that could read in the log file and output the location for each visit
View 4 RepliesI need with JBoss application Server.All I have JBOSS running without any issue.All I want is leading the Jboss logs to be deposited at /var/log/jboss.Say, if there are more than one instance running then create a seperate logs like /var/log/jboss-insta1, /var/log/jboss-insta2 etc.
View 2 Replies View RelatedSo 1 year ago I installed Lenny, but in the process of installation during the splitting of the drive I have mistakenly set a seperate parition for "/var/logs" instead of "/var/log". Is there any way to redirect all the logs to this seperate partition (var/logs) or it's better to go through the whole trouble* of installing Lenny again? *the trouble because it was hell of a problem to fix grub that didn't recognize SmartArray RAID (cciss driver), the problem is that I don't really remember how I fixed it. Symbolic link won't help since physically it will still be on the other partition. Do I have any other option?
View 3 Replies View RelatedI had no luck with network manager and i was surfing the net and it said wicd was better so i installed that and installed 1.6.1 But it was not obtaining an ip address
So i searched again and ppl said that its a problem with 1.6.1 and they said 1.5.9 was better. So i installed wicd 1.5.9 and its still not obtaining an ip address.
The router is unencrypted no security, ppl suggested trying to set a security on it so i tried WEP and when i do that it gets stuck on trying to authenticate the key phrase.code...
A quick rundown of my equipment and plan for this particular machine.
SOYO P4I845PEISA Motherboard
Intel Pentium 4 2.0GHz Processor
512MB DDR333 RAM
ATI Radeon 8500 128mb AGP Video Card
Using onboard AC'97 Audio and Davicom NIC
Linksys BEFSR81 Wired Router
I am setting up a multiboot system with several OS's, multiple versions of Windows & several Linux distros. The main point of it all is just to have a system where I can load up a given version of Windows or Distro of Linux if I need to test something or show someone how something works.
The Problem:
5 versions of Windows installed, all hardware configured and functioning properly (including NIC) All Windows versions obtain DHCP IP addy with no problems.
Installed Red Hat Linux 9 (first of my linux distros) and it autoconfigured all of my hardware and has no problem getting an IP address.
Installed Fedora 8 and it could not obtain an IP address. I fiddled around with the network settings changing this and that, covered all of the options, and it had no effect. By this time I was irritated, so I just formatted and reinstalled the whole thing, which had no effect and resulted in the same problem. I decided to try it again, this time turning off my sound card and nic for the initial installation. After the initial install, I turned on the sound card and booted up to install it, then restarted, turning on the nic to install it. Fedora installed them both, and managed to get an IP address from my router.
I looked at the ifcfg-eth0 file and the only thing that was different from the previous installs was that a line reading "type=ethernet" (I believe thats what it said) was not there in the working install and had been before.
Puzzling and irritating, but Fedora was now working so I moved to the next distro on my list.
openSUSE 11.0
First install I tried the same thing I did with Fedora (turning off the NIC which did not work like it did in Fedora)
Second install, left all of my hardware enabled, and made it to the part where it asks to verify your internet connection. I clicked Test, and got this error:
Opening of Connection
eth0 device: Davicom Semiconductor, Inc. 21x4x DEC-Tulip Compatible 10/100 Ethernet (rev 40) DHCP Client is already running on eth0
I finished the install, and then got on another machine and I searched the net for this error, but could find nothing that specifically applied to my problem. I played around with the network settings, tried a couple of things that I had come across in my search (changed between tulip and dmfe, checked the box for "Request Broadcast Response", ran "service network restart" in Terminal) none of these had any effect.
The most irritating thing about this is that RHL9 had no problem with this whatsoever and it is badly dated, and the much newer distros are choking on it.
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies View RelatedIt is a WEP connection. I am able to connect fine from the terminal (iwconfig/dhclient), but when i try to connect using wicd it hangs on "obtaining IP" until finally giving up.
Also, i noticed if i disconnect after already connecting via command line, Wicd will then connect properly.
my sister's easy peasy ubuntu netbook crapped out. i took out the hard drive and hooked it up to my desktop. on my desktop, i booted into ubuntu via usb and browsed for files to salvage. certain folders say i don't "have the permissions necessary to view the contents."
how can i obtain these permissions? it's been a while since i've dealt with linux.
So to give a little background, I'm trying to pass wireshark(with a custom plugin) through my company's build system.The build system functions inside a change root thus all the dependencies need to located somewhere inside the chroot. Wireshark has a massive dependency tree that I couldn't possibly import manually one by one.So my question is, is there a way to conveniently import all the dependency packages somewhere on your local machine. This would mean I would just import the one folder into my change root.PS: the build-system's change-root has SMART package manager installed. But the channels it comes with are local ones(very little to choose from). So an alternative solution would be import therepositories that apt-get uses into smart and then use smarto install the packages which is monumentally easier.
View 9 Replies View Related1) THE SETUP: I have a home set-up with 3 Ubuntu computers, including an HTPC which is always on, plugged into a Verizon FIOS routerI also have a web based cam (TrendNet TV IP422W).The cam has an ethernet jack so it plugs in directly to the router.It has a simple firmware that allows users to log in via HTTP.It is also managed via HTTP.
2)THE PROBLEM: the cam does not keep logs.So I never know who is logged in at any one point. It's not a big deal, but it is annoying.I want to fix that.The router does not keep logs either.I was told I can get a linux based router to replace (or plug in) to the default FIOS router, but I am looking for something simpler and cheaper.
3)THE FAILED SOLUTION: my idea was to set up the Ubuntu HTPC to always forward a given port to the webcam via the LAN. I tried to follow the instruction from URL...as best I could, see below. 6666 is the port that the cam is listening to (the router is set to forward that port to the cam's LAN IP 192.168.1.30). 5555 is the port that I am trying to forward through the HTPC (ubuntu.local or 192.168.1.130 below, and the router is set to forward any 5555 TCP packets to the HTPC at 192.168.1.130).The iptables commands below where run on the HTPC.
I have downloaded a driver for my D-LINK WIRELESS N NANO USB ADAPTER DWA-131, but everytime I try to install I get the message cannot change permissions. I am using WINE as it is a Windows7 driver. Any help gratefully received.
MSI U135X Notebook
RAM:1gb
HDD: 250gb
OP: LINUX UBUNTU 10.04 LTS
RF: 802.11b/g/n
Tony 044
I'm working with a program that uses Open Motif to create all of the widgets, including the Open File dialog box (obviously). However, Open Motif being kinda old-timey, 80's vintage, and for the most part now an abandoned project, it is quite clunky. So, actually what I need to do is to open some files located on my work server. I have already successfully connected to the relevant server directories with Samba, and with programs built with GTK+ (such as GIMP) I can open files across the network because I have created a bookmark in Nautilus, and those bookmarks appear in the Open File dialog box created by GTK+. Now, Open Motif is different: it doesn't see network locations, orNautilus shortcuts. When I type "smb://serveripyadayada" in the search folder, it really doesn't like it and complains. So, what do I do? Can I get somehow Open Motif to open a network location? Or can I do a run-around and place a shortcut in the file system that points to the network location?
View 2 Replies View RelatedI use conky to display my IP address on the desktop. I do this by using wget in the conky config to grab the ip off of whatsmyip.org, but sometimes it seems the sites down, and conky will then not display itself while it periodically trys to get the address
View 3 Replies View RelatedI am mystified as to what is happening to my NFS mount which is very strange as it sounds like the NFS server is allowing the connection.Does anybody have any ideas ? Are there any other NFS logs I can look at ? There doesn't appear to be a hell of a lot for me to go on ..
View 2 Replies View RelatedI have been testing ubuntu 10.10 maverick, it has some nice features. Anyway I am missing the possibility of writing manually the folder you want to go on nautilus using the Location bar. It was used to have some kind of icon which you can click and it switched between graphich breadcrumbs or the location of the folder and you could changed it manually, you know what I mean?
View 2 Replies View RelatedI want to compile geki2 from source. I tried apt-get source geki2but I getReading package lists... Done
Building dependency tree Reading state information... Done E: Unable to find a source package for geki2I assume that /etc/apt/sources.list needs some additional entry. I run lenny.
Apart from that could someone explain to me what is the importance of files *.dsc , *.tar.gz and *.diff.gz in every package ? I assume *.tar.gz is the source. Is this independent from Debian ? I assume also that *.diff.gz is some patch you have to apply after you expand *.tar.gz in order to get a Debian specific version but how do you apply the patch ?
When I try to login as me - it gets pretty far but then something happens and automatically logs out. This happens in Gnome, Kde too. Now - I have no problem logging in a Root. Is there a way I can try to stop the login process before it kicks me out, or is there a way to look at some files to tell me what's going on?
View 3 Replies View RelatedI just installed openSUSE dual-boot with windows. Wireless works fine on windows. Only ethernet works on openSUSE. At first, it couldn't even find my wireless network. With my friend's help we experimented and tried everything to find the driver for my broadcam4312 driver.
Later, my friend some update from the official openSUSE peeps... Then, the wireless could my network. I entered in my password and then hoped for the best but then it got stuck on the Obtaining IP Adress part. I know I got the rite password.
I'm trying to find ssh logs from up to 6 months ago. I can only access the /var/log/secure* logs up until the beginning of this month. Any way to find the older ones? Do they get archived somewhere else?
View 4 Replies View RelatedMy Ipod got stolen a few days ago and I am trying to figure out its mac address so that i can track it. I have sshed into it several times and i found some logs for some of the sessions but I cant find its mac address anywhere. I am wondering is there a way i can figure it out with my ssh logs or some of my other logs?
View 1 Replies View RelatedAfter having scoured the internet and the forums for advice, I am still not able to connect via Wireless, which is being controlled by Network Manager.The following is info I obtained from running a script that I obtained reading these forums:
* Hostname: linux-8qpz.site
* Run date and time: Sun Oct 24 10:12:58 EDT 2010
---------------------------------------------------
[code]...
I have access to a "virtual" Windows server terminal, which I can access through my Ubuntu Linux via tsclient or rdesktop. Additionally, there are printer shares on this network, which can be accessed from any Windows PC on the network (including the "virtual" terminals); lets say the address is [URL]. Now, I open \printshares.company.com in the "virtual" terminal in rdesktop (avoiding tsclient since it has a Bug #94743 in tsclient (Ubuntu): Terminal Server Client isn't able to copy to/from clipboard) - and I can see all printers fine.. However, when I'm on my Linux machine directly on the work network, I try and do something like:
$ ping printshares.company.com
PING printshares.company.com (192.168.0.200) 56(84) bytes of data.
^C64 bytes from 192.168.0.200: icmp_req=1 ttl=124 time=10.4 ms
[code].....
Is it possible to retrieve the - let's call them "connection settings" - from the Windows terminal session, so I could replicate them under Linux when running smbclient? the IT department running these Windows servers is quite irritated by people using Linux; and will offer no support to those kinds of "customers". Furthermore, if obtaining those settings requires some installation on the client session, since I don't have permissions to install anything on the Windows terminal session.
ccess to an iso file in chroot environment from my usual root (/) env..
Within the chroot environment I have an iso file placed... In my program I need to access this iso file and perform mount and other operations.. But I cant do this in the chroot environment as I have only basic commands here (ls,cp etc.. and no mount)
So how can I access this iso file from my program ? Is there something like a file-descriptor which I can associate with the file exit from the chroot env and access the file via this fd ?
how does one configure a Ubuntu 10.4 machine to write its logs to a syslog server?
View 1 Replies View RelatedOn our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
It has been found that a certain isp changes my ip if a certain sequence of buttons is clicked upon in the adsl router's web page.Is there any bot smart enough to log into the router, go to the right page, and click upon certain buttons when F9 is pressed?
View 5 Replies View RelatedWhat is the preferred method for obtaining Harvard style referencing in a LaTeX document?
View 1 Replies View RelatedI just did a fresh install of 10.04 on my system and everything runs perfect and exremely smooth, however the update manager and firefox are taking forever to load (the progress meter reads something like 2d 17hr 23m), however the internet connection is very fast.the logs are all insanely clean with the fewest errors I've ever seen, so this shouldn't be too terribly difficult to solve. Also I seem to be having a problem with the font on Firefox, every fourth letter or so has a bright streak in it. Anyway, that might be related or not but my main concern right now is getting my download speed up to par?
View 1 Replies View RelatedIn 9.10 I could access my auto-mounted network location with something like /home/user/.gvfs/sharename. This was particularly useful for F-Spot because that's the only way I could get it to import photos from my server.However, in 10.04 I no longer have a .gvfs folder and can't find a way to import photos from my server in F-Spot.
View 3 Replies View RelatedI am having problems sharing my external hard drive.
It is plugged into my Ubuntu LTS media centre computer and is just a standard USB Seagate HDD. It works fine when I access it from the same computer it is plugged into, both in Ubuntu and Windows machines.
I have set it up as a shared resource using the shares-admin app and at the same time, shared the home folder of that machine. I can access the home folder fine from my laptop over the network but when I try to access the external HDD, I get the following error msg: 'Unable to mount location - failed to mount Windows share'.
My laptop has the same OS as the media centre - Ubuntu LTS 10.04 Lucid. I am trying to access the share via Places > Network. I'm not sure why it comes under Windows shares because neither machine has Windows on. The network is a Wi-fi home network.