I have downloaded a driver for my D-LINK WIRELESS N NANO USB ADAPTER DWA-131, but everytime I try to install I get the message cannot change permissions. I am using WINE as it is a Windows7 driver. Any help gratefully received.
MSI U135X Notebook
RAM:1gb
HDD: 250gb
OP: LINUX UBUNTU 10.04 LTS
RF: 802.11b/g/n
Tony 044
I just installed openSUSE dual-boot with windows. Wireless works fine on windows. Only ethernet works on openSUSE. At first, it couldn't even find my wireless network. With my friend's help we experimented and tried everything to find the driver for my broadcam4312 driver.
Later, my friend some update from the official openSUSE peeps... Then, the wireless could my network. I entered in my password and then hoped for the best but then it got stuck on the Obtaining IP Adress part. I know I got the rite password.
After having scoured the internet and the forums for advice, I am still not able to connect via Wireless, which is being controlled by Network Manager.The following is info I obtained from running a script that I obtained reading these forums:
* Hostname: linux-8qpz.site
* Run date and time: Sun Oct 24 10:12:58 EDT 2010
---------------------------------------------------
[code]...
i have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View RelatedAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedI am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
I downloaded my linux wireless driver (realtek 8191se), but I don't know how to install it because there is no .exe file(like windows). It has a readme file which says :
"You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User sudo su
1. Compile driver from the source code make
2. Install the driver to the kernel make install reboot"
I just upgraded ubuntu to 11.04 and I need to install the wireless driver again. I downloaded the driver and I am getting the following error when running make:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated. Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
Here's what I already installed on my laptop trying to get it fixed.
gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4)
2.6.38-8-generic
lrwxrwxrwx 1 root src 22 2011-05-01 22:16 linux -> linux-headers-2.6.38-8
drwxr-xr-x 24 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8
drwxr-xr-x 7 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8-generic
drwxr-xr-x 4 root root 4096 2011-05-01 22:10 linux-source-2.6.38
[Code].....
I am trying to install wireless network drivers but I couldn't find any driver for wireless under network drivers. I just installed ubuntu 9.10 today but my wireless is not there. I am able to connect through wire but not wireless.I went to enable hardware driver also , but I couldn't see anything under it.It was kind of blank.I did tried wired update also didn't find any wireless. My wired connection is working fine except wireless.
View 4 Replies View RelatedI am completely new to linux so a lot of this has been foreign to me. I have ran the lspci command to find out my wireless card is Broadcom Corporation BCM4313 and I found the driver for this card at:it won't let me post the URL for some reason...but i googled "Broadcom BCM4313 driver for linux" and it's the first link.I downloaded the 32-bit driver but now I have absolutely no idea what to do.The download has folders named lib and src, and a text file called Makefile.
View 3 Replies View RelatedMy Broadcom STA wireless driver has failed to installed. The error report says that "PLEASE HAVE A LOOK AT THE LOG FILE FOR DETAILS: /var/log/jockey.log WHAT SHOULD BE DONE TO GET THE WIRELESS STA driver functional.? Gotta see it functiioning back!
View 5 Replies View RelatedI have recently installed kubuntu 9.04 on my laptop. i then connected an ethernet cable and upgraded it to kubuntu 9.10. but i would like to connect to the internet using wireless. but i do not know how to install the windows wireless driver for my card on this OS. my card is: D-link AirPlus G DWL-g630.
View 6 Replies View RelatedI got the native driver for linux already but just don't how to do it. It is an external wireless usb card, it's from Ralink.
View 4 Replies View RelatedI have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
install a wireless card driver.
View 4 Replies View RelatedCan't install wireless network driver. The output of 'lsmod' is:
Module Size Used by
ndiswrapper 183164 0
i915 172552 2
drm 142208 3 i915
[code]....
And the output of 'sudo rmmod ssb' is:
ERROR: Module ssb does not exist in /proc/modules
Told me to fo to /var/log/jockey.logGot this I believe? what may be wrong?
2010-12-27 21:22:37,907 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2010-12-27 21:22:37,990 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx:
[code]....
I am trying to install usb wireless network card drivers on to lucid. I didnt think i was soo much a noob but it has come apparent to me now.Anyway when i use 'sudo make' i get errors that i do not understand.
View 4 Replies View RelatedIn Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
My netbook wireless card is ralink3090,it works fine in ubuntu10.10 after I upgrade to 11.04 it down.
I downloaded a driver from http://www.ralinktech.com/support.php?s=2,but I can not install it.
Code:
I am using Maverick 10.10 on a Toshiba Satellite Pro L510 which has this card, full output from lshw:
[code]...
So far, I've figured out that 'Error 2' basically means any of probably a zillion or two possible errors. The line I have in bold is obviously the one. I have searched, dug, probed, but can not work out what it means or where to start fixing it. Reason I'm bothering at all is that yes, the Realtek card worked 'out of the box' but is pretty unreliable, a third and less the speed of the other machines in the house
So I am trying to install my Realtek 8191SU wireless Driver but because I am a noob I don't understand everything that they say in the read me file from where I downloaded the linux version of this driver. The Realtek 8191SU wireless driver can be foun here:
[URL]
how to instlall the driver but I don't know where driver directory is. Here is the site
[URL]
I use and acer aspire Z5751 and I have ubuntu 64-bit installed.
I have MacBook 3,1. I just installed 11.04. When I go to activate the "Broadcom STA wireless driver" I get the message "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log" When I check the log the message is "2011-04-28 18:38:59,896 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted"
I have had 10.04 on this computer in the past and it worked fine, but this is a fresh install of 11.04. Any suggestions on where to go from here?
how to install wireless driver on inspiron 1012 mini on ubuntu server 10.10 32bit. Not shore what is the wireless card name. I have no internet acsess whit that pc but can copy files whit usb from another pc.
View 9 Replies View RelatedI'm using Fedora 14 GNOME. At least until tomorrow when 15 beta comes out Anyway, I'm trying to install drivers for my wireless card. It's a Realtek Semiconductor, RTL8191SEvB. I'm using RTL8192 drivers, which work just fine when I can get them to install. I have all of the necessary files to install it, and they've worked before on a previous Fedora 14 (KDE) install. I cd into the drive and run "sudo make" which gives me the following:
[Code]....
I hope I'm posting in the right forum here, but I'm trying to install a realtek wireless driver and make goes okay, but when I get to make install it says permission denied when trying to create a file in a folder near the end of the process. Is there anyway to fix this? What can I do?
View 2 Replies View RelatedI need some help on my Samsung n150. I have installed Fedora 15 recently and i cant get a few things to work.
1. Wireless wont work ( How to install the wireless driver )
2. Fn Keys dont work ( How do i get them to work )
3. Is there a Software download center in fedora? ( like Ubuntu )
I've got a Atheros AR9285 wireless card. I'd like to install the driver so I can access the internet, but I cannot install it without installing the driver to access the internet. See the problem?
Fortunately, I've got a Windows partition set up that can access the internet. Hence this post. How can I go about installing the driver?
Where can I download the driver from? Where should I put it on my hard drive? What command do I use to install the driver?
Edit:
I'm on a gateway laptop. I know I can't install the drive from within windows. I'm asking which driver to download and what command installs the driver from within Linux.
Edit2:
I can't use LAN in this case.
I have a Rosewill b/g/n wireless USB adapter. I downloaded the source code of the linux driver from Rosewill website. How do I compile the code and then install the driver? I think that I can just type "make" to compile the code, but, how to install the driver after the compilation?
View 2 Replies View Related