Ubuntu Networking :: No Connection With Ralink RT2501 Wireless Card / Solve This?
Aug 29, 2010
I use Ubuntu 9.04 and try to get a Sweex LW053 USB wireless card (Ralink RT73/RT2500 chipset) to work. According to the Wiki list in the sticky thread, this one should work "out of the box" since 8.04.
lsusb delivers
Bus 002 Device 002: ID 148f:2573 Ralink Technology Corp. RT2501USB Wireless Adapter
and there is also some wlan0 entry that doesn't look too dodgy when typing ifconfig.
From this I get that my laptop recognizes the card.
I also typed in some numbers such as SSID and DNS server address in Preferences>Network Connections where asked (although the information that I had wasn't 100% what was asked for so I tried to guess what needs to be filled in which fields).
However, I don't get an internet connection (Firefox can't find server...)
What else do I have to (or can I) do?
View 1 Replies
ADVERTISEMENT
Jan 7, 2010
Even with both machines in the same room, I'm only getting 1Mbps when using a pair of TL-WN321G wireless USB adapters to link my main box and my laptop. I'm using Fedora 11 on both machines. It is just as bad if I use the laptop's built-in wireless. lsusb shows the adapter uses the Ralink RT2501USB chipset. iwlist wlan0 rate gives "wlan0 unknown bit-rate information."
View 1 Replies
View Related
Mar 11, 2010
I just purchased a RALINK WIRELESS G PCMCIA WIFI CARD VISTA/LINUX (UBUNTU).
It is supposed to be UBUNTU plug and play out of the box with no driver downloads needed.
I installed it but could not find a way to search the active Wi-Fi networks available like on my Actiontec card on windows xp. The wireless router/ethernet I have is an Actiontec setup for Qwest-DSL and Actiontec is the name of the wireless network.
Strangely I tried to choose setup a "new network" and entered Actiontec as the network name and it found the network and said it was connected to it. However the internet still is not working?
View 1 Replies
View Related
Mar 11, 2010
Has anyone ever heard of this card or have knowledge of how to configure it to allow me to get on the internet?
View 1 Replies
View Related
Mar 31, 2011
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
View 9 Replies
View Related
Jan 4, 2011
I have a fit-PC server with Debian GNU/Linux (Lenny). I would like to use it as a wifi access point since my Linksys WRT54GS has become unstable.I have a USB Ralink wifi NIC. When I insert the card to USB I can see this with lsusb: Bus 001 Device 002: ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter.I have tried following various HOWTOs on using wifi card as AP in Linux, however, it seems that the card cannot go into monitor mode. I believe this is because I must use a newer driver or upload non-free firmware or something like that.I have tried installed wicd, but it does not help.
I bought this wifi adapter because I was told that it is one of the most common used Linux supported wifi cards that can be used as access point and a lot of other stuff.How do I set up this USB wifi card as wireless access point in Debian Lenny?
View 2 Replies
View Related
Sep 13, 2010
I'm having trouble installing my RaLink RT2561/RT61 wireless card. It seems that this driver causes problems for all ubuntu users, and I've tried a couple of work arounds, none of which work for me.
Firstly I downloaded the most recent driver from here: [URL]...RT2501PCI/mPCI/CB(RT61:RT2561/RT2561S/RT2661) is the driver I downloaded. Next I performed the following steps:
Code:
robinsjp@home-desktop:~$ sudo apt-get install linux-headers-`uname -r` build-essential gcc
Reading package lists... Done
Building dependency tree
[Code]...
View 9 Replies
View Related
Nov 6, 2010
I have strange behaviour on my portable computer Asus UX30. I'm using latest Ubuntu 10.10 release. The main problem, and the most annoying, is a system freeze on shutdown, suspend, hibernate or even restart. For a week I'm trying to find a solution on the web, but no result. From what I noticed, computer freezes when a wireless card is turned off or on. Here are some basic info from wireless card:
Code:
sudo lshw -class Network
*-network
description: Wireless interface
product: RT3091 Wireless 802.11n 1T/2R PCIe
vendor: RaLink
[Code]....
View 4 Replies
View Related
Sep 14, 2014
I've just installed Debian Wheezy on my old Toshiba Satellite A10 (Intel celeron 2.20 GHz, 1GB Ram, 30 GB hard drive) and tried to connect to my home wifi network with a usb wifi adapter (Hamlet HNWU254G). lsusb in terminal says it is Ralink RT2501. Ethernet worked fine, so I installed firmware-ralink package, the adapter was recognized and I was able to connect.
However, I heard quite frequently a strange whistle and realized it came from the usb wifi adapter; it also got very very hot. Other strange thing: the computer some times freezes: screen flickering, loss of control of mouse and keyboard, need to shut down with power button.
At first I thought it was the video card not being powerful enough for Gnome (even classic), but then I installed Xfce4 and nothing changed. Instead, when working offline, freezes happen less frequently (but still happen).
I've tried the usb adapter on another laptop with wheezy: it gets hot, but there are no whistles and freezes.
View 1 Replies
View Related
Apr 20, 2009
I have recently installed Fedora 10 onto my PC, dual booting with XP, and I am fairly new to linux. I have been trying to connect to my wireless network, but cannot even get Fedora to recognise my wireless adapter (Belkin N1 +MIMO). I have tried to follow a few tutorials that go through either the ndiswrapper method or by using native drivers. Because I don't have an internet connection on Fedora, I have to boot into XP to download the files for either ndiswrapper or the native drivers, rather than installing using the terminal.I downloaded the ndiswrapper RPM, and it failed because of an 'unexpected error', and when using the tarball, it could not find the makefile. The native drivers did not install because of unresolved dependencies.
View 11 Replies
View Related
Apr 26, 2010
About a year ago I had a different computer with this same wireless card (edimax EW-7128g) and it was recognized immediately after I installed ubuntu 8.10. I found this hardware compatibility page, and it says it is compatible, at least on 9.04.
After reading this old guide I found:[URL].. I downloaded the latest driver, and followed the instructions (i had to refer to the readme too, some things were slightly different which I'm assuming is because it's the 2010 driver not the version referred to in that tutorial) up until:
(e) copy the rt61.ko driver file to the modules directory then load it
Code:
$ sudo cp rt61.ko /lib/modules/`uname -r`/kernel/drivers/net/.
$ sudo depmod
$ sudo modprobe rt61
I don't see where rt61.ko is.I've got the information for my wireless connection edited into /etc/Wireless/RT61STA/ rt61sta.dat iwconfig shows pretty much default stuff, no mention of my wireless card or any type of connection, though the card does show up at the bottom of the lspci query. I added the wireless connection information into the "Network Connections" prompt in the preferences, but obviously that's not accomplished much of anything for obvious reasons. Should I just install 9.04? Judging from this account, getting this wireless card to work would be a hell of a lot easier.
View 3 Replies
View Related
Nov 11, 2010
I recently purchased an MSI A5000 notebook, but regrettably it happens to use an obscure branded wireless card that's given me quite a bit of frustration to get working. I do have a bit of history behind this card that might help to solve this problem. First of all the card is a Ralink rt3090STA, and the manufacturer does provide a linux driver for this card (available here)
I was using Ubuntu 10.04 32 bit until last week, when I decided that I would like to try using a 64 bit system. I would prefer to use fedora instead of Ubuntu for the time being. Ubuntu had some major problems recognizing the card for some time before I was able to get it to work. The process I used to resolve the issue on my Ubuntu system has not proven successful on Fedora 13 x64, and I would like any help I can get to try to resolve this problem.
View 1 Replies
View Related
Dec 28, 2010
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies
View Related
Jun 26, 2011
I am trying to figure out how I can see which access point my wireless card is connected to. I have a slackware system and. Basically, I know my card is connected to something, because firefox can do a google search, but I'm not sure what network it is connected to, since there are a couple open networks in my apt complex. Is there a command to list the ssid? that I'm connect to? and, I'm new to all this so I'm not sure if ssid is the correct term. I have a consumer grade netgear wireless "router" that I bought from bestbuy which has a "passphrase".
View 2 Replies
View Related
May 8, 2010
After installing Lucid, I noticed that my Ralink RT2860 card would not connect to my home network using WPA2 despite the network being visible and of good strength. So I followed the guide at [url] in order to install the newest Ralink drivers.
After installation, same issue. That is, the card will connect to my a/b/g/n network if I leave it unprotected, but it will not connect to the same network if switch it to WPA2. After being given the passphrase, the wireless icon on the indicator applet shows that it is trying to connect, but after awhile it fails. Does anyone know why the built-in driver and also the official Ralink driver are no good for WPA2 in Ubuntu 10.4 for my RT2860 card?
View 9 Replies
View Related
Apr 29, 2011
I recently bought a HP g62x laptop for myself. It sports a decent Core i3 processor, 4 gigs of RAM and a 500GB HDD. It also came with Wireless-N, a real bonus because I am using a Wireless-N router. The chipset is a Ralink 5390. It came preinstalled with Windows 7, and everything works fine in there (obviously).
I then proceeded to install Ubuntu 10.10 x64 a few days ago (this is before Natty came out) and everything worked . . . except WLAN. So I plugged in via Ethernet and went looking and found that I clearly wasn't the first to discover this issue. I found a guide here that I followed to download the Ralink Linux driver (which is stated to support my chipset), configure, compile, and install. Everything went perfectly, I restarted; lo and behold, I have a list of access points. I went to connect to mine, entered the password, and now the animated "WiFi wave" logo keeps going indefinitely until you click it, and it freezes for a few minutes. It will unfreeze if you let it sit but clicking it causes the same freeze again.
I couldn't really care less about a WiFi icon freezing, but a.) it freezes everything else in the system up, not just the icon, and b.) it never actually completes the WiFi connection. I really, really don't want to be forced to use Windows because of a crappy WiFi driver!
Since Natty came out I installed that and I can't even compile the driver without fatal errors, so I reverted to 10.10 and everything is the same as it was before. Note that this is a clean Ubuntu 10.10 Desktop Edition 64-bit install, nothing updated/modified/changed besides (attempting) to install this driver.
View 1 Replies
View Related
May 10, 2010
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies
View Related
Sep 1, 2011
I installed the driver from Ralink (2011_0406_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO) and followed the instructions in other threads and my card does not work. I am getting this message.
"$ dmesg | grep -e rt5 -e wlan
[ 14.454006] rt5390sta: module license 'unspecified' taints kernel. I have also installed the Ralink RutilT program using synaptic. I can see my wireless device and many others around me but I can't connect.
View 9 Replies
View Related
Mar 31, 2011
How can I setup a lan connection using wireless pci card on entire system D-link DWA-510 card I have .
View 5 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Mar 10, 2011
I just want to setup adhoc network using the wireless card that came with the box but I'm having a hard time getting it up. I have gone through a lot of posts about wireless troubleshooting but nothing has solved it. Left clicking the network manager tray icon always says wireless network is disconnected. "Enable Wireless" is checked.
Some info:
Code:
rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[Code]....
View 4 Replies
View Related
Jul 30, 2011
I've ubuntu 10.04 and I can't connect to router wi-fi with my new wireless adaptor usb (ralink 2870). I've tried various guides but nothing. The adaptor work fine with Windows and other linux distributions.
View 5 Replies
View Related
Jun 24, 2011
I use Ubuntu 11.04 on a PC clone desktop.With ethernet cable connects automatically, despite compiling wlan0 not connected. Do not know what I installed Ubuntu 10.04 and 11.04 over 30 times and still the same. Try to manually connect to the network connection did not work either hidden and also deal with ipv4 address assigned and neither worked.
1 ) Machine Brand and Model (PC/Laptop):
desktop pc, clon.
2)lspci
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)[code].....
Try setting manually to no avail not know if I did well. Ralink also downloaded from the rt2860sta and then compiled and did not work. Now I went to install Ubuntu 11.04 and change nothing but that which is above is what I have right now in the machine.
View 9 Replies
View Related
Jun 30, 2011
My wireless download rate is absurdly low (0.3 mbps) compared to a faster upload rate (1.5 mbps). My girlfriend's laptop running windows gets much higher download rate (20+ mbps).
View 8 Replies
View Related
Aug 6, 2010
I just installed Fedora 13, and now I figured, maybe I don't know so much about pc anyway. Before I tell you my problem, I would like to say that I know a lot about windows, but about linux, I don't know anything. A plain beginner. And about my problem, it's more like a "how to" question than a problem.
You see, I don't know how to set up the wifi? The pc has installed wifi, and all I need to know is how I can connect to the internet. In windows you would usually just press the connection icon and then choose witch network you would like to access, and then eventually type in the password, and there you go. But it seems it's a little more advanced at Fedora. But I will give it a shot.
View 11 Replies
View Related
Feb 27, 2010
My wireless on my Ubuntu desktop is really slow compared to my windows laptop. Its not a flash problem or a browser specific problem.
I have searched the forums but can't find much.
I did disable ipv6 (it now shows up as being 'ignored' in network Manager which is correct, right?) but that hasn't helped.
It doesn't make a difference whether I use DHCP for everything or just for address only with the Google DNS addresses.
After entering 'lspci' my card shows up as
Code:
Because of a problem with system freezes I have updated to the 2.6.33-020633rc7 kernal but this hasn't had any impact one way or another on wireless speeds.
My router is a Belkin WRT300n.
View 2 Replies
View Related
Sep 5, 2010
Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.
The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.
A screen grab is attached.
I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04
PS. I have no networking on the system but I can transfer files via USB flash drives if needed.
Some System info:
Code:
1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650
2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI
3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code].....
View 1 Replies
View Related
Jun 19, 2011
I installed the Kde desktop and i'm unable to setup a broadband dsl connection
i have done the settngs in network manager gave password username service name etc.
but the option for connection doesnt appear
the connection works properly in windows as well as gnome 3 desktop but not in kde
View 3 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Apr 23, 2010
No wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 Replies
View Related
