Ubuntu Networking :: No Wireless Networks Detected / Solve This?
Apr 23, 2010No wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 RepliesNo wireless upon re-installation of 9.10 Drivers seem installed. No wireless networks detected. code...
View 6 RepliesI have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies View RelatedI'm dual-booting Ubuntu 9.10 (upgraded from 9.04) and Windows 7 on my Dell Inspiron 1525 laptop.Ubuntu doesn't recognize any wireless network (both in 9.04 and 9.10); my Windows OS works perfectly well with wireless, as does my wired Internet connection with Ubuntu and Windows.I've had this problem on previous installations of Ubuntu (I've removed and re-installed it several times) but I can't locate the solution anywhere. I've tried numerous fixes that I've found online, but none of them have worked.System>Administration>Hardware Drivers tells me that the Broadcom STA Wireless driver is activated and currently in use
View 4 Replies View RelatedI've tried every fix i could find. I'm on a Dell Inspiron 1420 running Ubuntu 10.10 lucid lynx using a BCM4312 LP-PHYi've tried everything to get my wireless networks to connect but nothing works. I finally got my computer to recognize my wireless card but it doesn't detect or connect to networks. Before i was able to at least see the networks but not connect or stay connected once i disconnected the ethernet cable. i will post the output of ifconfig, iwconfig, iwlist scan
View 3 Replies View RelatedI've used this computer to connect to a wireless router before. I recently moved and for some reason it isn't working.I have a too long of an lspci output to type (I'm on a different computer).
View 1 Replies View Relatedi installed backtrack recently....and wireless networks are not detected.... which deb to install because it is based on ubuntu 8.10
View 1 Replies View RelatedI have a msi netbook with ubuntu netbook remix installed and it was working great until yesterday when suddenly it stopped detecting my home network. There are no problems on my two other machines, so I'm sure the problem is the netbook. I have no idea how to go about troubleshooting this. I was hoping someone could help me by giving me a place to start.
View 2 Replies View RelatedI have ubuntu 11.04 installed. I have a D-link USB Wireless Adapter. Ubuntu detected it and it worked fine. I have a Beetel 450TC1 Router which broadcasts my internet connection. Ubuntu recognizes it, and keeps on trying to connect.It asks me for Authentication again and again.( Don't tell me to check the password again, it does work on everything else )And its not the router problem also, as I tried broadcasting through a laptop I have, Ubuntu again detected but couldn't connect and kept asking me for Authentication
View 2 Replies View RelatedNo wireless networks detected with AR5001 chipset
View 1 Replies View RelatedNew Ubuntu user here, and I'm having difficulties connecting to my router at home. I've searched around the forum for a couple of hours now, to no avail. My router was originally not broadcasting ssid, so I turned broadcasting on. Now I can see the router, but when I enter a password (which I know is correct) nothing gets connected.
View 9 Replies View RelatedI'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
View 7 Replies View RelatedI am running debian testing dist-upgraded to sid with the latest gnome-shell. All is fine, I have recently moved to a new house and noticed that network manager wont detect my home wireless network. It does scan for networks and locates SSIDS from other local networks including my neighbours wifi where I can connect but will not detect mine. The modem router used is a zte quite popular in Greece and I have the broadcom wl driver installed. By the way since it is a dual boot machine - nasty win7 connect just fine and so does my mobile phone...
View 3 Replies View RelatedNo wireless after upgrading to linux kernel 3.0 in opensuse 11.4. I'm using Kde and gnome 3, everything was working fine under the 2.6.39 kernel, but now both only detects my wired connection. Any help resolving this would be greatly appreciated. I have a Netgear WNDA3100 adapter that uses the Atheros drivers. It also is no longer detected in my Fedora 15 after upgrading the kernel, but it still works in Mint 11 with the 2.6.38.8 kernel.
View 9 Replies View RelatedMy wireless network is being detected but it refuses to connect to it. I am entering the accurate passcode and I have tried doing various commands for it to work, but it is being stubborn.
Also, it would help to know which WEP Index to use and type of Authentication.
I am running -current on an ASUS eeePC 1000HE. Wireless was working fine up until the time I applied the latest changes from the Slack -current tree, which upgraded wpa_supplicant. Now, no networks are detected.
I looked at some related threads here and did some basic checking: neither the eth1 nor wlan0 interfaces show up in iwconfig or ifconfig output. Am afraid I am still a wireless dunderhead and don't know where to start troubleshooting this issue.
I have configured a wireless pcmcia card using ndiswrapper. I'm sure that works, as with the command "iwlist wlan0 scan" gives me back
the list of detected wireless networks. At this point I was wondering: is there a way to detect the new interface (wlan0) with network manager? Even after enabling the wifi card the network manager gnome applet always finds only eth0.
I installed ubuntu and i installed it using the install as a program inside windows options but when I boot into ubuntu it does not detect any networks I tried the command sudo pppoeconf it says ethernet card is not there and then it asked me to try modconf and when i try modconf it says that modconf is not installed How can i set internet connection in ubuntu 10.04 I get address assigned by DHCP
View 7 Replies View RelatedI could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies View RelatedI'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.
View 1 Replies View RelatedI have a Dell Inspiron 1525. I am unable to connect to wireless networks. I have a fresh installation of Ubuntu 8.04. I have installed Ndiswrapper (ndiswrapper-utils_1.8-0ubuntu2_i386.deb) and the GUI for ndiswrapper. The ndiwrapper GUI reports that the hardware was not found. Yet I am able to connect to the wlan using Windows.
View 3 Replies View RelatedI recently did a clean install of Ubuntu 10.04 and tried using a DLink DWL-G122 dongle for a wireless connection.
It seems to connect to the wireless router, but I cannot seem to access any websites using the wireless connection. Ethernet connections to the computer work perfectly, but ethernet isn't ideal.
The results of the lsusb command is code...
I have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
I am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I'm running Ubuntu 10.04 64bit on a Thinkpad T61, and I keep running into some issues with the wireless networks. For a while, the connection works fine (sometimes several hours, sometimes 15 minutes or so--there doesn't appear to be an event associated with it). Eventually, though, the connection disappears; first, though the widgets say I'm connected, nothing will go through, and soon after, it realizes I'm not connected and, moreover, it can't find a single wireless network, despite the fact that it was just fine a couple of minutes beforehand (and other devices still have access to the WLAN, so I know that the router hasn't crapped out). I've tried using wicd, but the same thing happens.
View 2 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI have a pretty beat-up laptop, on which the inbuilt wireless doesn't work, and so I now have an ASUS WL-167g, which is acting up!It almost always connects to the required networks without an issue, but then once I'm connected it's REALLY slow on some of them! For example, while I'm at school, it works flawlessly! And at a couple of friends' houses, it works too! however, at home, and at a couple of other places, despite the fact that it connects, its so slow, that google takes like 5 mins to load and searching for anything on google leads it to time out!! This happens whether I'm right next to the router (full signal strength) or 2 floors up (at like 3 bars strength)!
It's getting pretty frustrating to have to swap my lan cable between my desktop and laptop constantly, and also to not be able to use my laptop away from my desk!Does anyone know what might be going on??Also, while i have you guys here! I have another problem -- with the inbuilt card.. Initially, it wouldn't work at all.. but more recently, it has started to function (it connects and works on my home network fine) the only problem is that about 10 mins after I turn the wireless switch on on my laptop, it hangs! (EVERYTIME) (if it's relevant, my laptop is a SONY VAIO VGN-S46GP). Again, any input would be appreciated!!
I installed Lubuntu yesterday on an older Dell laptop and the installation went fine. The only thing not working after the installation was the wireless. After hours of searching, I was finally about to get it to recognize the wireless card, see wireless networks, and connect successfully by running these commands.code...
View 3 Replies View RelatedI have ubuntu 10.10, and at my house I primarily used wired, and it works fine, and under windows earlier today I was able to locate networks, so my wireless card is working. I'm currently at my girlfriends house, and trying to connect to her wireless internet. When I try to connect, I can't find any networks. I've made sure her network has sharing and discovery enabled, however in my wirelss manager it comes up as blank. There's the option to add wireless manually, but do I really need to go through the trouble of finding the routers mac address and all that, it should just show up?I could switch back to windows to see if I can connect, but I'm almost positive it's just the linux wireless manager..
View 4 Replies View Related