Ubuntu Networking :: Networking Disabled After Restart?
May 27, 2010Last night I was using my sony vaio vgn-nr38m online with no problems. I boot up this afternoon and it now says networking is disabled.
View 1 RepliesLast night I was using my sony vaio vgn-nr38m online with no problems. I boot up this afternoon and it now says networking is disabled.
View 1 RepliesI do have internet cause I am using it on W7. The only thing that I have done different is I left the pc on over night so I guess it went to suspend for the first time. Then I powered off. After turning the pc back on and logging in I have no internet. Not even with the Ethernet plugged directly in. There is supposed to be a little blue light on when it sees the wireless and that is off. When I click on the networking icon in the system tray it says networking disabled. It shows no wireless. When I plug directly in I still get nothing. I'm using 10.04
View 2 Replies View RelatedI have just finished installing 9.04 via USB onto an Acer Travelmate C110.For the record, 9.10 refused to even boot on this laptop. I used universal-usb-installer and unetbootin, both without success.The installation completed successfully, except that wireless networking is not enabled. Can someone please point me to the correct resource whereby I can get the wireless nic working.
View 3 Replies View RelatedI can't upgrade to Ubuntu 10.10 because it said that there's a problem with my network connection. When there's none, since I am typing this now.
View 2 Replies View RelatedEverything worked fine on kernel 2.6.33-6.But since the update to kernel 2.6.33-8, not always but nearly everytime I resume from suspend, my wireless network is disabled.When I right click the tray Icon the "Enable Networking" box is unticked and greyed out.Only a reboot brings networking back
View 14 Replies View Relatedfor some reason, since i switched to a static ip configuration my wired nic is disabled at startup. in order for it to work i have to manually start it with ifup. i am not using a network manager of any kind.
[Code]...
trying to bond two 3G modems but I cant Im really new in this matther so I really This is the error that appears
ubu@ubu-AOD255E:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface ppp0=ppp0.
[code]....
It didn't work. I plugged the cable back in, and it didn't auto-connect, and still says no connection is available after doing the CLI command.
View 2 Replies View RelatedI've recently installed a second monitor and it's great having all that extra space.
However, Ubuntu 'loses' the new monitor after a restart and I have to go into System>Preferences>Display and get the second monitor re-enabled and put to the left of my existing monitor. Quick flicker and the second monitor is on.
I don't really want to have to do this every day so am I missing something so my second monitor is remembered?
I had this issue in 9.04, resolved it in 9.10 (it went away on its own), but it's back in 10.04..I currently run my Ubuntu machine as a headless server and connect to it using TightVNC from a Windows computer.However, this connection won't work unless I start the Ubuntu machine with a monitor connected. Once that's done, the remote connection works fine until the Ubuntu machine has to be restarted. Thankfully Linux doesn't need restarting as much as Windows does, but unfortunately, every time I restart (i.e. with a kernel update, which happened at least a half-dozen times with 9.10), I have to plug the monitor in or TightVNC won't be able to connect.
System - Control Centre - Remote Desktop is set to allow remote connections as it should, I haven't altered this on upgrade.It's like it's some sort of graphics issue - if no monitor is detected on startup, disable the GUI completely...the system runs fine in remote terminal mode over putty, it's serving files fine and running the few server apps I have on it, but nothing over TightVNC.
I'm setting up an Ubuntu server and I keep getting strange problems with my editor.I'm not sure if this is because my keyboard configuration is wrong or I screwed up the installation but regardless it's quite frustrating.
When using the movement keys (arrows and numpad) I get "[" brackets and "C"s, if I hold down or push down on the key hard a list of errors and text comes up, usually involving something that says something like:"Mount disabled" or "____ disabled press CONTROL-X to restart the shell"Similair problems are also found in vi (when in insert mode).I have been plagued with text editor problems and have need several reboots just to get out of a file, often because it just flat out stopped responding to keyboard commands.
I cannot seem to enable my wireless connection in 9.10. I know that the connection WAS WORKING maybe a month or so ago. However, 99% of the time I am wired.I am using a BCM4312 It shows up in lspci The drivers are loaded (wl, lib80211 and lib80211_crypt_tkip) If I look at System->Administration->Hardware Drivers the Broadcom STA driver is active. dmesg says that the interface is eth1 but then moves it to eth2 If I click on the network icon in the panel I have options for connecting to eth0 (wired lan which works fine) but under "Wireless Networks" it says "Wireless is disabled" in gray.
View 2 Replies View RelatedI after updating or something I wasn't able to connect to the internet(neither wireless, nor wired) anymore. I managed somehow with google-ing to fix the problem with the wired internet, but my wireless is still disabled.
Here is what I got:
ifconfig
Quote:
I have the Broadcom STA wireless driver installed.(System - Administration - Hardware Drivers)
Everything was working fine today and for many days before today. (this is a pretty fresh install of 10.10 Maverick).
I installed a VPN connection (PPTP) to connect to work.
That worked fine. i connected, remoted into the machine I wanted and did what I had to do.
I was ABOUT to disconnect from the VPN and when I clicked on the network manager icon BAM it said DISCONNECTED. saved me another click or 2. But now I have no networking at all.
The network manager icon says "Networking disabled"
I tried: warm booting a couple times cold booting a couple times
I also tried:
Code:
service restart networking
and
Code:
sudo /etc/init.d/networking restart
[Code].....
I would really just like to delete/uninstall anything that has to do with VPN's and see if that works. Or maybe reinstall network manager. Are those reasonable places to start?
the wlan card is boadcom 802.11b/g WLAN its on HP 6000 laptop it connect im a total newb to so that dosnt help me very much i see a lot of kernel stuff wich i have no idea what that means but it connects on XP but not on ubuntu i just installed it as a dual OS on XP and im lost i have treid a few things that others have posted on other sites but with no success HELP i am running a Linksys wireless G router the WRT54G model and everything i have tried has not ever enabled the wireless for ubuntu so far anybody got answers please help a newb i can get what ever you ask me to type i bet but i have no Exereince on linux /ubuntu
View 1 Replies View RelatedI have a Thinkpad x61 with intel wireless chipset. At startup, wireless is always disabled, and bluetooth is always enabled. Function+F5 has no effect. Can you tell me how to enable automatic wireless connection at startup?
View 3 Replies View RelatedUsing kubuntu 10.04, I accidentally disabled networkmanager on startup for one of the users of my system. This user now has to manually start networkmanager each time after logging in. How can I make kde run networkmanager automatically again?How this happened: when I started a parallel session as an other user, while already connected via networkmanager in my own profile, kde detected this and asked something along the lines of "There's already a networkmanager running, run networkmanager automatically in the future?" Since I was a little confused, I clicked "no", and that's how things are ever since. I thought there would be some system setting that would allow me to restore this setting, but I haven't found it yet...
View 2 Replies View RelatedMy wireless was working fine for about a year using 9.10 until I installed an update about May 28 2010. After that my HP laptop did not recognize any wireless routers including my Netgear. In early June I upgraded to 10.04. My HP laptop has: product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. Dose the following apply when looking for the source of my disabled wireless found at: [URL]
Setting wireless regulatory domain via module option no longer supported. Ubuntu 10.04 LTS enables the CRDA wireless regulatory framework for controlling which wireless channels are usable and visible in a particular location. If you previously had to use the module option similar to that below in /etc/modprobe.d/options.conf to allow access to certain channels in your locality then you may find that wireless will not function at all: options cfg80211 ieee80211_regdom=EU You should remove this kernel module option on upgrade from releases earlier than Ubuntu 9.04 and use the iw*reg command instead. (This change was made in Ubuntu 9.04.) Here are the results for the Code sudo lshw -C network
[Code]...
I realize this seems like a repeat question (and it probably is). I have been searching for a solution to my issue on the forums/web for a few hours to no avail. I have a Compaq f700 with Vista. I am sick of Vista. I installed Ubuntu today. Looking forward to using it more. However I am having problems with the internet.
My wireless internet is on the on setting, however, the light will not switch from orange to green (if I load Vista instead, the light changes). Broadcom BCM4311 802.11b/g WLAN [14e4:4311], It says my wireless is disabled. I can not figure out how to enable it.
We're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
When there's a power fail I can't start my pc in WOL but i've to start it manually.there's a soluction?
View 8 Replies View RelatedI'm running Ubuntu 11.04 latest updates on a HP G50 laptop. It was working fine but would never auto connect to wireless. I would have to select the wireless from the top menu and connect to a network. However I disabled it once and tried to re-enable but ran into a problem. The Enable Wireless was grey and would not allow me to enable.
Have searched google and tried lots of solutions and none worked. I even reinstalled and still have the problem.
System: Fujitsu-Siemens Amilo Li 2727 Laptop
Wireless: Atheros Wifi chipset
OS: Ubuntu 11.04
I have a problem with the above where I don't see any Wireless networks.
Wireless is enabled from the Network Applet.
I have carried out the following tests and the results are as follows:
Code:
I then tried to unblock using:
Code:
After running the above commands I get this:
Code:
I have checked the adapter and found it to be disabled:
Code:
Other commands I can think of for information that might be useful are below:
Code:
wlan0 Interface doesn't support scanning : Network is down and..
Code:
and
Code:
and
Code:
I recently installed ubuntu 11.04, using the dual boot option with windows vista. I have noticed that when I reboot with vista, it recognizes my wireless network, but is unable to connect to it. Internet works perfectly fine with ubuntu, just not with vista. How do I solve this?I have tried disconnecting from the internet in ubuntu, and even uninstalling ubuntu,This is my output when I type �sudo lshw -C network�:
*-network
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
[code]...
My old Winbook laptop had good wifi connection under Ubuntu 9.10 but shows 'disabled' under Ubuntu 10.04 and 10.10. At least under 10.10 it came up with working video (had to mess with GRUB on 10.04 before video would work). I have an onboard wi-fi card that has never worked well with any Linux as far as I know but the Atheros PCMCIA card worked solid under Karmic (9.10). Here is some diag. info.
sudo lshw -c network
*-network:0 DISABLED
description: Wireless interface
product: PRO/Wireless 2200BG [Calexico2] Network Connection
[Code].....
im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal
remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface
[code]....
I'm using Linux Mint 8 KDE, which is essentially kubuntu karmic.
Been trying to set up bittorrent (tried several different apps), have followed all the usual steps, forwarded ports on both Guarddog and my router, but still no incoming connections. Then tried disabling the firewall in Guarddog - still no incoming connections. Never had any problems configuring my router before so can only think that there must be something else blocking ports in linux other than iptables.Also had same problem just using ufw and gufw
I have an HP mini laptop (Intel Atom, N270, 1.60GhZ, 1Gb RAM, Win XP ver 2002 SP3) that I upgraded to Ubuntu 10.04 netbook version last nite.I can dual boot, and so far everything under Ubuntu works great - except for the wireless interface. Rebooting back to WinXP, it works fine. The 'sudo lshw -C network' command shows "disabled". Ubuntu sees it, its just disabled. The help file says to make sure its on. It is - there is no physical switch..I am VERY new to this, with no programming experience to speak of.
View 9 Replies View RelatedIn simple, I have tried everything I can find on this issue, but I am still unable to get it working on my HP DV4 laptop. My laptop has a Intel 5100 wireless card, and it always says that wireless is disabled. Ive tried booting with the wireless switch off, with it on, ive reinstalled the driver and did everything in a post I found here (cant find a link) that basicly had me reinstall the driver from intels site, then reload the network manager, to no prevail. Im running ubuntu 10.4.1 (just installed), and this is really a big issue 4 me.
View 1 Replies View Related