Ubuntu :: Second Monitor Disabled After Restart / Enable This?
Feb 14, 2010
I've recently installed a second monitor and it's great having all that extra space.
However, Ubuntu 'loses' the new monitor after a restart and I have to go into System>Preferences>Display and get the second monitor re-enabled and put to the left of my existing monitor. Quick flicker and the second monitor is on.
I don't really want to have to do this every day so am I missing something so my second monitor is remembered?
View 9 Replies
ADVERTISEMENT
Apr 30, 2010
I had this issue in 9.04, resolved it in 9.10 (it went away on its own), but it's back in 10.04..I currently run my Ubuntu machine as a headless server and connect to it using TightVNC from a Windows computer.However, this connection won't work unless I start the Ubuntu machine with a monitor connected. Once that's done, the remote connection works fine until the Ubuntu machine has to be restarted. Thankfully Linux doesn't need restarting as much as Windows does, but unfortunately, every time I restart (i.e. with a kernel update, which happened at least a half-dozen times with 9.10), I have to plug the monitor in or TightVNC won't be able to connect.
System - Control Centre - Remote Desktop is set to allow remote connections as it should, I haven't altered this on upgrade.It's like it's some sort of graphics issue - if no monitor is detected on startup, disable the GUI completely...the system runs fine in remote terminal mode over putty, it's serving files fine and running the few server apps I have on it, but nothing over TightVNC.
View 5 Replies
View Related
Apr 30, 2010
I'm setting up an Ubuntu server and I keep getting strange problems with my editor.I'm not sure if this is because my keyboard configuration is wrong or I screwed up the installation but regardless it's quite frustrating.
When using the movement keys (arrows and numpad) I get "[" brackets and "C"s, if I hold down or push down on the key hard a list of errors and text comes up, usually involving something that says something like:"Mount disabled" or "____ disabled press CONTROL-X to restart the shell"Similair problems are also found in vi (when in insert mode).I have been plagued with text editor problems and have need several reboots just to get out of a file, often because it just flat out stopped responding to keyboard commands.
View 1 Replies
View Related
Aug 4, 2010
So I have been trying to connect my Wiimote up to my PC using the following HOWTO: [URL]... I had it working last week and for some reason it has now stopped working. I am using a USB Bluetooth dongle and I am sure that it is still working because I can connect the Wiimote up to my laptop no problem. What I have noticed is that on my Laptop the bluetooth icon is highlighted and on my PC although the Icon is there it is greyed out. When I go to preferences and click on turn on Bluetooth the button greys out for a while and then comes back saying "Turn Bluetooth on" again.
View 9 Replies
View Related
Apr 23, 2011
I installed the server version 10.04. The only problem with the install was setting up the network. I believe it was due to the fact that my nic was not setup correctly. The installation reconciled the nic, but upon the reboot after the install, I had no network capabilities. I tried to ping the router, no luck. ifconfig only showed lo. Also, the GUI (command F7) freezes and does not responds. The last thing shown is configuring web server. I tried to ndsiwrapp the drivers to the nic, but found out that ndsiwrapper is for wifi connections.
View 2 Replies
View Related
Jan 24, 2011
I have been using ubuntu 10.10 (running on a Dell Inspiron N4010) for a couple months and love it but the wireless just recently stopped working and I can't figure out how to re-enable it. I've searched endlessly the FAQ's, forums, etc but nothing seems to work.
uname -r
2.6.35-24-generic-pae
The output from lshw -C network
[Code]....
View 6 Replies
View Related
May 21, 2010
I have recently installed 10.4 (wubi installation), and am having strange problems with my networking.
It was working fine, wireless enabled, connecting to my network fine. Then for what seems like no reason, it decided to disable the wirless on boot, and I cannot re-enable it, the option to enable it (by right clicking the nm applet) is greyed out.
I have had this problem twice now, the first time it happened, my ubuntu installation was really new, so I just reinstalled, no harm done. The second time I did something that seemed to fix it (for a while at least), but now that is not working.
View 5 Replies
View Related
Aug 22, 2010
We're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
View 3 Replies
View Related
Sep 10, 2010
I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
View 6 Replies
View Related
Mar 28, 2011
I am running Ubuntu 10.10, and the icon for my wireless connection says it is disabled. Although my Wireless USB Adp.How do I get to enable the network icon????
View 1 Replies
View Related
Feb 14, 2011
I am using openSUSE since last 4 years ,which is installed on my External Transcend 320 Gig External Hard-disk. Now I don't know why but my network is not working, i.e. when I click on "Network Manager", it reads, "Network Manager disabled". So is there any way to overcome from this problem? I also tried to restart the network service but, it did not worked.
View 5 Replies
View Related
Oct 10, 2010
Last night I already succeeded upgrading to 10.10 (Maverick meerkat), on previous version I never face wireless issue after installed additional package (sudo apt-get install b43-fwcutter). But after upgrading I saw the wireless is disabled and the hardware indicator light off. I used Lenovo notebook.
This is my wireless detail info code...
View 9 Replies
View Related
Apr 22, 2011
I was cleaning my laptop and hit the wireless shortcut key on my Dell inspiron and disabled the wirless card. The key will not turn it back on either (I maybe messed with the short cut but dont remember). In the network manager it says "wireless hardware disabled". I am running 11.04 beta with gnome 3 shell. Here is from terminal
dan@dan-Inspiron-1545:~$ sudo lshw -C network
[sudo] password for dan:
PCI (sysfs)
[code]....
View 8 Replies
View Related
Aug 11, 2011
I'm running 11.04 with Unity and enabled Desktop Cube in Compiz Settings Manager. I ended up disabling services, i think "largedesktop" and enabling others like OpenGL and composite. Anyway, unity no longer works including the bar above and the icons to the left. Any idea how I can fix this?
View 2 Replies
View Related
Jan 24, 2010
I can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:
Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:
[code]...
View 9 Replies
View Related
Feb 23, 2010
I have installed Ubuntu KK server, and when I turn on my machine without monitor, after 5-7 min - system stop and not responding on all my requests (network, keyboard.). With enabled monitor all work good.
View 1 Replies
View Related
Sep 27, 2010
I want to compile ekiga 3.0.2 for ubuntu 10.04. But when I enter 'make' command in the terminal windows, it says that;
[Code]...
I tried to solve the problem by setting CFLAGS = -fexceptions, in the Makefile. But it didn't work.
View 1 Replies
View Related
Mar 4, 2010
opensuse v11.2, linux 2.6.31.12-0.1-desktop x86_64
ati radeon hd3200 (built into motherboard)
gnome desktop
The video acceleration is clearly not enabled since I can practically watch each pixel drawn. (Well, a bit hyperbolic, but really slow.) Another system, same hardware, had this slow video problem and at one point required a complete OS re-installation. The slow video refresh went away. So there is some way to configure the graphics+display to enable acceleration at install time.
View 4 Replies
View Related
Aug 23, 2010
I had Compiz Fusion working and wobbly windows and the likes, but after installing some updates and VirtualBox, Cairo Dock and AWN to see which one I liked, Amarok and Qlix for Zune, I restarted. Now when I open Cairo Dock there is a black border around it like transparency is disabled, no desktop effects, and I am unable to activate them because I get a no drivers found message. I don't see why this is happening considering it was working from the get-go
I have an ATI Radeon x1300, which is on the legacy list so I don't think there are drivers for it anymore that work with newer versions of Ubuntu, but I don't understand why it worked before.
My system specs:
Dell Dimension C521
2.5 GB RAM
AMD Athlon 64 3200+
ATI Radeon x1300
Ubuntu Lucid Lynx 32 Bit (Is it worth upgrading to 64 bit?)
View 3 Replies
View Related
May 29, 2011
I am having a problem with the nouveau driver in Fedora 15 Code: lspci | grep VGA 40:00.0 VGA compatible controller: nVidia Corporation NV41GL [Quadro FX 1400] (rev a2) The problem is that when I boot a Fedora 15 live Cd, either gnome or xfce, the monitors initially seem to work in that they display at the proper resolution, both as the CD boots and as X initially starts. I can see the background and the mouse cursor - it is "busy" ...
As the desktop finishes loading, however, my primary monitor becomes disabled. With gnome the screen goes black, with xfce it goes white. I can still see the mouse on my secondary monitor, but I can not seem to open any applications (such as a terminal) or change to a console (ctrl-alt-F1 or ctrl-alt-F2). I can boot into safe mode. Adding the boot option video=xxx sets the resolution on the console as it boots, but does not help running X.
View 1 Replies
View Related
Feb 5, 2011
How do I enable auto login for my linux servers? I just don't want to have to login everytime I start them up or restart them. As they are test servers this happens alot...
View 1 Replies
View Related
May 24, 2010
I'm running a fresh 10.04 x86-64 on a thinkpad w500, using the default video driver. The monitor shuts off randomly, sometimes while I'm using it and requires me to trigger sleep mode and waking up to bring back the screen. When it shuts off, everything else seems to be running. (i.e. its not going to sleep) I've turned off screensaver, sleep, hibernation and installed the Caffeine util to no avail.
pm-suspend.log: http://pastebin.org/273444
pm-powersave.log: http://pastebin.org/273445
View 3 Replies
View Related
Mar 31, 2011
I've recently installed Ubuntu on my laptop. I installed a bunch of compiz software from the software center. I used ..... to figure everything out. However, somethings didn't work; such as the cube wouldn't change to the sphere, and the windows animations wouldn't work. When I restarted my computer, the cube changed to what I had set. The windows animations, however, didn't. How can I get all of these effects to work, and to take effect without restarting the computer?
View 3 Replies
View Related
Aug 19, 2010
I'm running ubuntu 10.04 on a new pc I just bought. Every so often the monitor will just shut down and display a message: "no signal input". I'm sure the computer is still running though because the fan is still running and all lights etc. are still on. I've tried switching the monitor on and off and there is still no input signal, the only solution is to reboot the entire computer.
View 9 Replies
View Related
May 2, 2010
I have a three monitor set-up under 9.10, the monitors are connected to a pair of nvida 512MB GT240s, two on one, one on the other. After booting, I get the logon screen but only two of my monitors have a picture; to get the third running I need to login and restart gdm within a terminal and then login again. I'm using the proprietary nvidia 185.18.36 drivers (which oddly report my cards as 1024MB GT230s), with Xinerama. My xorg is included below.
Code:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" RightOf "Screen1"
[code]....
View 2 Replies
View Related
May 29, 2010
I've just bought a new monitor - Viewsonic VA2213w and am trying to set it up with Lucid. The resolution required is 1920x1080 @ 60Hz. I have an NVidia GTS250 with the proprietary driver v195.36.24 installed. I can set the right resolution in the nvidia-settings app, but it will not survive a restart. X always reverts to 1024x768. I have manually edited xorg.conf now to try to force the mode. The GDM login screen displays at the correct resolution, but on logging in X changes the resolution. Xorg.0.log shows the resolution being correctly set to 1920x1080 initially, then right at the end for some reason it is reset to 1024x768.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Thu Apr 22 11:45:35 PDT 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22 11:44:23 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
View 1 Replies
View Related
Aug 11, 2011
I'm trying to enable my second monitor after upgrading from 10.04 to 11.04. In the process of upgrading, I had to delete my xorg.conf file because it was causing errors and preventing the desktop from displaying.
So I tried using gksu nvidia-settings to enable the second monitor. If I enable it in TwinView, nvidia settings can apply it, it shows up but I can't use it.
If I try to enable it as a separate X-screen (which is what I had in 10.04) nvidia settings is unable to apply the settings, and so I have to save it as an xorg.conf file, which then causes my desktop to no longer display.
how to enable the second monitor any other way. Is there some new settings file I should know about?
View 1 Replies
View Related
Jun 22, 2010
I've just installed Ubuntu on my laptop. My laptop has an nVidia card so I'm forced to use the nVidia configuration tools. What I'd like to happen is for it to automatically start using my monitors if they're detected. OR, make a simple script that will enable the monitors without needing to restart X.
View 1 Replies
View Related
May 27, 2010
Last night I was using my sony vaio vgn-nr38m online with no problems. I boot up this afternoon and it now says networking is disabled.
View 1 Replies
View Related
Sep 22, 2010
I have a mac book pro 5,3 with the nvidia gforce 9600m. After getting Ubuntu installed as a dual boot, I wish to use an external monitor while using Ubuntu. (it doesn't have the problem with OS-X) The external monitor is a samsung syncmaster 192 n. when I connect the other monitor and press 'detect display' both go grey creens(the external already is of course). My lapton screen will not recover until restart either. I need this monitor to run a numerical mesh 3d mesh creator that will not fit on my screen alone. Wouldnt be a problem if the creators were software engineers but the program window cannot rescale, and is beyond the resolution capabilities of my 15'' screen alone.
View 1 Replies
View Related
