Ubuntu Networking :: Making Sure Two Network Cards Each Have The Correct IP Addresses?

Nov 2, 2010

I've got two NICs connected to two different routers, and on different subnets of course. Each is set for static IP. But somehow I must have mixed up the connections at some point, so the NICs don't always have the IP addresses I expect. I think there may also be a mixup with different ways of setting the network addresses. When I click the Network Icon on the Desktop, I see that each NIC has both addresses as options. The /etc/network/interfaces file has some information about eth0, but all commented out, so there must be another place the addresses get set. And I just discovered that eth0 and eth1 aren't physical but virtual. I guess eth0 is the first one that is set.

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Cannot Correct The Web Addresses

Feb 24, 2010

I have a Dell Inspiron 1545 with Ubuntu Karmic that was working like a charm until last week.When I'm using my college's wireless I can browse just fine, but when I'm in my home's network the web addresses cannot be resolved.I was suspecting of DNS error, but it's the same DNS address in all the other computers, and the whole network is working just fine.The thing is that if I use the IPs, for instance 64.233.163.104 for Google, it works fine, both pinging and browsing. So the problem is in resolving the addresses...

View 9 Replies View Related

Ubuntu Networking :: Random Creation Of Networks / Force It To Use Correct One Without Making Another?

Aug 2, 2011

Every time my wifi auto connects it gives me a strange message:

At the same time it makes a new network entry, overlapping the one previous:

It's usually a battle with the wifi and my re enabling the correct setting over and over and over again. Is there a fix for either the mysterious lack of selection in the first message, or a way to force it to use the correct one without making another?

View 2 Replies View Related

Networking :: Get A List Of IP Addresses Currently On The Network?

Dec 13, 2008

I am using DHCP on my home network. There could be as many as 5 computers logged in at any given time. Their IP addresses change depending on the sequence they log in.I want to be able to connect to them from any of them (some wired, some wireless) and share files by issuing a mount command for the appropriate shared drive.My question is how to get the IP of each computer when I only know the names of the computers. Pinging the computer name succeeds, but it does not give the IP.In other words I am looking for a Linux command that will come back with a list of IP's with their corresponding computer names so I can issue the right mount command. I would like to issue this command from a Linux terminal, but would also be happy to issue it from a Windows XP station.

View 14 Replies View Related

Ubuntu Networking :: Modify Network Cards MTU?

Apr 12, 2010

So I am looking to modify my network cards MTU (for some testing purposes), and I only know how to do it it Windows (via command prompt ping command with special flags) and not in Ubuntu.

Any easy way to figure out proper MTU numbers in Ubuntu?

View 2 Replies View Related

Networking :: IP Keeps Changing Between Network Cards?

Jul 8, 2010

I have a small pc running fedora 8 with iptables and 2 network cards for routing/firewall and secondary DNS.For some time I've been alerted by the network guys that this machine was generating some alerts. The real network IP address keeps being assigned to the other interface, intended for LAN only (10.0.0.1/24).I've already changed the PC, installed a more recent operating system, replaced the 2 network cards and the problem persists. I have another pc running the same services (except DNS) in a very simillar way and no alert logs from that one.onder if it is some configuration issue on my startup firewall script.I've also installed arpwatch and I could confirm this IP and physical address issue:

Arpwatch output:
hostname: my.host.name
ip address: my.ip.address

[code]....

View 5 Replies View Related

Networking :: Set 2 Network Cards In Bridge Mode?

Apr 7, 2010

I have installed CentOs 5.4 for Snort sensor , on the location where i intend to place the Snort sensor to listen for internal firewall leg (LAN) the switch doesn't support port mirror so i would like to create with 2 nic's bridge and pass trough the firewall internal leg my question how do i set such configuration.

View 2 Replies View Related

Networking :: Slackware Can't Recognize Network Cards

Mar 29, 2011

I have installed slackware 13.1 64-bit version and can not recognize network cards.I'm with laptop acer aspire 7540g.Wireless card is atheros ar5b93.Ethernet card is Broadcom NetLink � Gigabit Ethernet.

View 16 Replies View Related

Ubuntu Networking :: Wired / Wireless Network Cards Not Working

Nov 30, 2010

I'm new to Ubuntu - I've decided to give Ubuntu Studio a go as an alternative to Windows. However, after installing it, neither of my network cards work. I have a Intel Pro Wireless 3945ABG wireless card, and a Broadcom Netlink Gigabit Wired card. Neither work, And I'm not sure how to. I've tried searching, and have come up with the .tgz file here, but I have no idea what to do with it I'm concentrating on the wireless card for the moment, seeing as that will be the main one I use.

View 4 Replies View Related

Ubuntu Networking :: Machine Lost Controls Over Network Cards

Jan 14, 2011

I'm running xubuntu 10.04 LTS (upgraded from 8.04 LTS) on an old low power sempron machine as an always on 'internet machine' i.e. it does all my downloading email etc. and up until yesterday it has always performed flawlessly. Yesterday wasn't its fault, it was a BTI network problem that took out my internet service but while talking to tech support I realized that this machine has lost all ways to control the network cards. Network-manager and network-manager-gnome are installed according to synaptic but they have no menu or notification appearance. I've tried reinstalling them to no avail.

View 8 Replies View Related

Networking :: Can Use 2 Ethernet Cards For Green Network In Ipfire?

Jul 5, 2010

Ok, so I've gotten tired of my router, and I've decided to make my own using IPFire as the OS. Right now I'm looking for ethernet cards that I can use for the green network, but I don't know if I can use 2 for the same network. I'm trying to get 4 ports at 1000 Mbs, and the only thing I've been able to find so far that's within my price range is a card from startech that has 2 ports, but would I be able to use 2 for the green network?

View 3 Replies View Related

Ubuntu Networking :: Change The Network Card Priority With Multiple Cards?

Sep 26, 2010

I've got two network card interfaces on my computer, one wireless and one wired. The wireless card is connected to the Internet and the wired is connected to the LAN. When only the wireless card is active, Internet works. As soon as i enable the second wired card, Internet stops working. And it seems like Ubuntu chooses the wired card for Internet as soon as it's enabled.

Are there any ways to solve this? So my Ubuntu box always chooses the wireless card for Internet traffic and let me use the wired device for LAN only?

View 1 Replies View Related

Fedora Networking :: Configuring IPv6 (network) Tunnelling - Getting Only Internal Addresses From DHCP

Aug 25, 2011

I am trying to configure my IPv6 network. My computers are behind a Fedora gateway IPv6-configured, which is working great. But for computers inside my network, it seems I am getting only internal addresses from DHCP. Here is my ifconfig for an internal computer:

Quote: em1 Link encap:Ethernet HWaddr F4:6D:04:34:92:2B inet addr:192.168.0.184 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fe34:922b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:744250 errors:0 dropped:0 overruns:0 frame:0 TX packets:548987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:841392242 (802.4 MiB) TX ytes:60384500 (57.5 MiB) Interrupt:18 Memory:f7100000-f7120000

he-ipv6 Link encap:IPv6-in-IPv4 inet6 addr: 2001:470:1c:611::3/64 Scope:Global inet6 addr: fe80::cea7:b778/128 Scope:Link UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:61 dropped:0 overruns:0 carrier:61 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

[Code]....

View 2 Replies View Related

Fedora Networking :: Samba Share With Two Network Cards - No Internet Access

Mar 1, 2009

I have a fedora 10 box with two network card on eth0 I have a pppoe connection to the internet, on second card eth1 I share my internet connection end I set up a samba server but I don't know if the settings are good. How to do this settings right to work fine, the ip are assigned by dhcp I don't use any static ip .When I try to browse the internet from the other computers some site's like {.com ; .org ; .info} are block, other site from {.ro} are working. Someone tell me something about turn off all my filters, but I don't know where to find this filter to turn it off. And when I use samba I can't have and internet access or vice versa. My network look like that:

Code:
eth0
|<--pppoe connection
|
MyComputer
(fedora 10)
|
eth1
|
switch
|
comp.1 comp.2
Win OS MacOS

View 2 Replies View Related

Ubuntu Networking :: Alix 2d13 - Multiple Network Cards - Unable To Bind More Than One Physical Interface?

Jun 2, 2010

I have a strange problem regarding networking on the Alix 2d13 running Ubuntu 10.04. The Alix has 3 physical network interfaces, lspci says:

Code:
00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
Kernel driver in use: via-rhine
Kernel modules: via-rhine
00:0a.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105M [Rhine-III] [1106:3053] (rev 96)
Kernel driver in use: via-rhine
Kernel modules: via-rhine

[Code]...

It seems, if more than one cable is connected, a random hardware port is chosen as eth0-eth2. If only one cable is connected the port that is connected is chosen as eth0-eth2. Any idea what's going wrong here?

View 2 Replies View Related

Networking :: Making Network Between Host And Guest

Mar 5, 2009

I have rhel5 as host and guest is xp and rhel5, how will I make a network between them.

View 3 Replies View Related

Ubuntu Networking :: Making Adjustments To Network And Servers - Need Router?

Jan 7, 2011

I currently have an Airport Extreme connected directly to my cable modem but have been wondering if I should actually connect direct to my proxy server first. The reason I am asking is because I run multiple web servers for web hosting and I have a proxy server setup that directs traffic to the appropriate computer based on domain names.

I have my router connected to my cable modem, and then all of my computers are connected thru the router. To me it would make more sense to have my proxy server be the first to connect and then thru a second ethernet card connect to the router. I also have a 5 port switch on order as well. So basically I'm asking for opinions now, in preparation for making some adjustments to my network and servers.

View 3 Replies View Related

Ubuntu Networking :: Can See All Devices On Local Network And Their Local Ip Addresses

May 16, 2010

I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)

View 6 Replies View Related

Ubuntu Servers :: Two Network Cards / Can't Access Internal Network

Feb 25, 2011

I've installed Ubuntu Server 10.10 with two network cards. One for external, and one internal.My problem is that as soon as i activate eth1 (external), i can't access the server from the internal network (eth0)

With these settings i can't reach the internal network from inside.If i disable the gateway on eth1 and enable the gateway on eth0, it works.

View 6 Replies View Related

OpenSUSE Network :: Two Network Cards With Different Settings For Internet Access

Feb 9, 2010

I have a desktop computer running OpenSUSE 11.2 with two network cards installed. I would like to use both cards for connecting to the internet using different networks. The setting would be the following: eth0 is the main (default) card, almost all programs should use this NIC for connecting to the internet. eth1 is used only by a few programs, which have setting for selecting which network interface to use. The two NIC's are connected to different networks, so the IP address of the NIC's, the related subnet masks and gateways are also different.

Saying short, I would like to have the two NIC's as they would be in two separate computers. I can set the IP address and subnet mask of the NIC's. The main problem is that I can only declare one gateway. How can i setup this? I do not use network manager, I configure network cards using yast, but if needed I can of course use ifconfig directly.

View 9 Replies View Related

Debian Configuration :: Network Not Work When Use 2 Network Cards

Oct 24, 2010

I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.

I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.

The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.

View 5 Replies View Related

OpenSUSE Network :: BroadCom Network Cards Are Not Working?

Sep 4, 2010

I am using open suse 11.1 in my acer emachine laptop. Everything is okay except Network cards are not working. It says that firmware is missing or kernel problems. My network cards are Broadcom network cards. How can I fix it?

View 9 Replies View Related

Ubuntu :: 10.04 Static IP Addresses Using Network Manager?

May 2, 2010

I have four PC's in a home network setup, no server just peer to peer using ssh. I have tended to use wicd to set static IP addresses because Network Manager didn't always perform as I thought it should. Now that I have installed 10.04 I cannot see how to set static addresses using Network Manager so I installed wicd, and disabled Network Manager. After setting the address with wicd it shows that the computer is connected to the internet however I cannot get internet access, though I can network with my other computers. I've uninstalled and reinstalled a few times just to check that I haven't been careless but the results are still the same.

View 8 Replies View Related

OpenSUSE Network :: Set Multiple IP Addresses Onto Server?

Jul 23, 2011

I want to set multiple IP addresses onto my server and I can then put under an alias.

But is it possible to somehow create a script in perl example that can do this for or is it only possible manually?

View 1 Replies View Related

OpenSUSE Network :: Ifconfig With 2 Addresses On JeOS?

Sep 13, 2011

I have created my own distribution with susestudio.com , based on jeOS template and it works well But I have some problems with network configuration. I make a default configuration with susestudio ( configuration -> General -> network ) and I put for example 172.16.0.185 address. I also put a script which configures IP address with different informations coming from for example a serial port to make my own IP address. This script make the new address and call the ifconfig system program. For example, the script calls "ifconfig eth0 172.16.0.182". And now, I can ping the two addresses, 172.16.0.185 and 172.16.0.182. Is this normal ? I thought the new command "ifconfig eth0 172.16.0.182" would overwrite the old value ( 172.16.0.185 ). It works as this on other distribs ( like ubuntu ) but not on opensuse.

I know that I can have 2 addresses but using the following syntax : "ifconfig eth0:1 A.B.C.D" (if kernel supports aliases ) , and I don't know if it is normally possible to have 2 address from the same subnet. How can I overwrite the default config , and not to have the first address available ?

View 1 Replies View Related

Ubuntu Installation :: Network Cards Not Detected?

Feb 16, 2011

Toshiba T110 laptop, 4 meg ram, kernel 2.6.31-14; multi boot Suse / Ubuntu / Windows; Atheros AR8132 Ethernet card; Realtek RTL8191 SE wireless card.

Installed 9.10 from an old DVD lying around - everything appeared to go ok, but no networks cards - Ethernet or wireless - were detected during the install.

(Later versions do not install - problems somewhere with video card - I need to allow multi kernel selection - but this is another issue)

Does this mean that this install is toast, or can it be saved?

View 4 Replies View Related

Ubuntu :: D-Link Network Cards Not Recognized

Feb 9, 2010

I have two D-Link network cards installed in my computer. The Ubuntu 10.04a2 installer seemed to recognize only one of them, though I know both are functional. I plugged a CAT5 cable in here, connected to my home network (with Internet). The installer proceeded happily, configuring DHCP and synchronizing clocks. However, when I rebooted after its completion, Ubuntu didn't recognize that I was connected to the network. I re-jiggled the RJ-45 connector, to no avail. When I run "System Testing," it does list both network cards during the Network suite, one being D-Link, and the other "James Bond" or something. So, what gives?

View 2 Replies View Related

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

Debian :: Network Cards Not Recognized?

Aug 10, 2010

I just installed Debian 5.0 onto my laptop (Dell e6410) and it appears to boot and run fine, except that it does not recognize the network card (it did not do so during the installation). It also does not seem to recognize the wireless card.I have an ethernet connection, but running ifconfig displays only the local connection.I have tried adding -nomodeset and -noacpi to the boot menu, but that does not seem to change things

View 9 Replies View Related

OpenSUSE Network :: Assign IPv4 And IPV6 Static Addresses?

Feb 19, 2010

How do I assign IPv4 and IPv6 static addresses permanently in OpenSUSE 11.2? Currently I am only able to assign either IPv4 or IPv6 static address not both. I cannot find even the interfaces file(/etc/sysconfig/network/interfaces).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved