General :: Ubuntu 9.1 - Invalid RT Chipset Detected

Mar 1, 2010

My computer was working fine yesterday. Last night I opted to load the newest ubuntu os ver 9.1. Now all I see after the initial booting takes place is a blank screen. I have managed to look at the booting up sequence and at the end of the multiple lines of code is the message: 'Invalid RT chipset detected'. I do not know if this is significant or not.

View 14 Replies


Ubuntu Networking :: No Wireless Networks Detected With AR5001 Chipset?

Jun 29, 2010

No wireless networks detected with AR5001 chipset

View 1 Replies View Related

Ubuntu Networking :: Invalid MAC Address Detected?

Nov 26, 2010

I've just installed a fresh copy of Maverick Meerkat 64bit and I wanted to setup static ip, but unfortunately I can't because of invalid mac address detection during each startup. The message looks like this

dmesg |grep Mac
[ 5.988576] forcedeth 0000:00:07.0: Invalid Mac address detected: 0b:68:66:ea:0f:00
[ 5.988590] forcedeth 0000:00:07.0: Please complain to your hardware vendor. Switching to a random MAC I remember having the same problem on suse distro and the solution I found at that time, was to change the /etc/udev/rules.d/70-persistent-net.rules and edit it to look like this


View 3 Replies View Related

Ubuntu :: 11.04 - VirtualBox 4.1.0 (Invalid Settings Detected)

Jul 30, 2011

I'm running Ubuntu 11.04 on a Compaq Presario CQ62, with factory specs. I have downloaded and installed VirtualBox 4.1.0 r73009, and successfully installed Windows XP SP3 and Windows 7. However, I have now hit a problem. When I go to Settings for either virtual machine, I get an error that says "Invalid settings detected". It doesn't matter what I try to change or adjust, this message will not disappear. I do not currently have USB support for the Virtual machines, but it's not a big concern to me at this time. I don't know what commands I need to issue or what information I can offer to get the readout of what's not working right. I am very comfortable using Terminal, but have no idea what to look for or where to go.

View 4 Replies View Related

Programming :: Error : Glibc Detected Invalid Pointer

Aug 5, 2010

hey dude error in gnu c pointer

I am using Red Hat Enterprise Linux 5.0.

#include <stdio.h>
#include <stdlib.h>
int main()
char * cp = NULL;


View 4 Replies View Related

General :: Invalid ACPI: Invalid PBLK Length [5] During Debian Boot

Sep 20, 2010

I installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?

View 1 Replies View Related

General :: Parsing Err Or Invalid $END - Correct User Use Of Invalid Characters

Feb 10, 2011

Trying simply to insert into table. Have succeeded in doing this but now want to correct user use of invalid characters. If I'm understanding correctly, Real-escape-string seems to correct these, so I've been trying to figure out how to use it. A short, test code version gives me a syntax error at INSERT VALUES, which--because it still has the single quotes in the text--tells me the real-escape-string didn't work. The code below gives me a parseing error with invalid $END at </body>.

Insert Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' VALUES (UTC_TIMESTAMP,'What's happen' bra?')' at line 1 Parse error: syntax error, unexpected $end in /home/powere15/public_html/DB/exercises_insert_record.php on line 94
<html><head><title>Exercise Catalog Insert Record</title></head>
/* Change db and connect values if using online */

View 2 Replies View Related

Software :: "Clock Skew Detected" And In Ntp.conf / Error Message Invalid Date In Changelog?

Feb 28, 2011

I try to setup a HPC cluster with CentOS 5.5. But now there is no Internet connection available in the room where the hardware is located so I set up ntpd server using synchronization with local clock (maybe I do something wrong). Here is my ntp.conf file on a master node (the master node has IP, a file server has IP and compute nodes are, comments are omitted):

restrict -6 ::1
restrict mask notrust
restrict mask nomodify notrap

Any time I try to install software building it from source when I run make I get a waring "Clock skew detected. Your build may be incomplete". Some software build successfully and run normally after install but some build tasks are failed for example when I try to build RPM's via 'make rpms' for BLCR I get an error message about invalid date in changelog. But the system date seems to be right. I suppose I have invalid settings of NTP.

View 5 Replies View Related

General :: Loading 4 Versions Of Ubuntu To Server And Get Hung On The Agp Chipset?

Jan 23, 2010

Have a McFee Server; SuperMicro 370der, P3 Dual 1 ghz, 256 gig ram, 2 18.2 gig scsi(lvd) drives. Have tried loading 4 versions of ubuntu to my server and get hung on the agp chipset. don't know where to go to get it to work. Tried 6.0 to 9.10.

View 3 Replies View Related

General :: Command To Check The Chipset Of Mainboard - RHEL-5

Oct 21, 2010

Let me know command to check the Chipset of mainboard. (RHEL-5)

View 3 Replies View Related

General :: Screen Resolution, Xorg, I810 Intel Chipset?

Mar 2, 2010

I have a IBM ThinkCenter workstation with an Intel i810 chipset and can only get a resolution of 800x600 maximum. I have read this url dealing with this chipset and resolution and cannot get anything past 800x600. here is my /etc/X11/Xorg.conf

PHP Code:
Section "ServerLayout" Identifier "Default Layout" Screen "Screen0" InputDevice "Keyboard0" "CoreKeyboard"EndSectionSection "InputDevice" Identifier "Keyboard0"


View 2 Replies View Related

General :: Which Vanilla Kernel Version Provide Support For QM57 Chipset

Dec 13, 2010

which vanilla kernel version provide support for QM57 chipset?

View 1 Replies View Related

General :: SATA Drives Or Chipset Throwing DRDY Error And ICRC ABRT?

Mar 18, 2010

I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity):

[ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6
[ 7.376480] ata2.00: BMDMA stat 0x5
[ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns }[code]....

I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error.Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem.Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc.

The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives.I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu.

View 2 Replies View Related

Ubuntu Installation :: Grub And 9.04 - Error "invalid Command" Or "invalid Execution Format"

Aug 16, 2011

Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition

(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)

View 4 Replies View Related

General :: Invalid Format When Using TV As Monitor - Ubuntu 10.04?

Aug 16, 2010

I have an old Dell Optiplex GX240 running Windows XP hooked up to my Olevia HDTV. I'd like to format this computer and install Ubuntu 10.04.After burning the Ubuntu install disk, I hook the computer to the tv via HDMI and reboot to the CDROM but upon booting I receive an 'Invalid Format' error and no video is shown.I did some searching - there is very little info about this problem. This post seems to indicate that the solution is to hook up the computer to an old CRT monitor, then after the computer has booted, switch the HDMI cable to the tv.This solution is unsatisfactory. Does anyone have experience with this problem? Is there another way to get around this problem?

View 1 Replies View Related

General :: Invalid Size Displayed For SSD?

Dec 11, 2010

I have an 80GB Intel X25-M SSD drive installed on a Linux box running Debian 5.0. The file system on the SSD is ext4. I've had no problems with the drive, and have been using it for quite some time as both swap file storage as well as a place to store a few large database files which require random access.

However, I noticed this odd size readout from ls:

> ls -lh /ssd
total 34G
-rwx------ 1 root root 23G 2010-12-11 18:00 file1.dat
-rwx------ 1 root root 22G 2010-12-11 18:00 file2.dat

I changed the names of the files here for security reasons, but other than that this is exactly what ls has output. Obviously, the total size readout is incorrect.

Here is the corresponding output from df

> df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 74G 35G 36G 50% /ssd

Despite this incorrect readout, the drive seems to be working fine, and diagnostic utilities turned up nothing wrong with the drive. Is this some sort of known bug in ext4, or is it more likely there's something physically wrong with the drive?

View 2 Replies View Related

General :: Why 12/01/1965 Is An Invalid Date

Sep 12, 2010

why 12/01/1965 is an invalid date ? It is a bug on date ?

miguel@quadbit:~$ date -d "12/01/1964"
Ter Dez 1 00:00:00 BRT 1964
miguel@quadbit:~$ date -d "12/01/1965"
date: invalid date `12/01/1965'


View 1 Replies View Related

General :: LDAP Add - Invalid Syntax (21)

Apr 29, 2011

What is wrong with the following ldif file :

dn: dc=mydomain
objectclass: dcObject
objectclass: organization
o: My Ldap
dc: mydomain

dn: cn=Manager,dc=mydomain
objectclass: organizationalRole
cn: Manager

Because I get following output :
[root@1 ~]# /usr/bin/ldapadd -x -D "cn=Manager,dc=mydomain" -W -f /etc/openldap/basic.ldif
Enter LDAP Password:
adding new entry "dc=mydomain"
ldapadd: Invalid syntax (21)
additional info: objectclass: value #0 invalid per syntax

View 1 Replies View Related

General :: Make All Filehandles On That Filesystem Invalid?

Aug 12, 2010

How to unmount a filesystem in Linux without investigating why is it busy? I want to do it in one command. It should handle applications using that filesystem, submounts, containers (lxc-execute -n qqq <command>) and all other things.

Just "unmount. No objections!". Special kernel patches or configuration is allowed. Filesystem should be really unmounted, so umount -l is certainly not an option. For example, for cryptsetup remove (BTW how to forcibly cryptsetup remove? Update: cryptsetup luksSuspend, but you won't be able to cryptsetup luksResume if it is not LUKS). How to make all filehandles on that filesystem invalid?

The only reliable way I know is mounting the filesystem through the FUSE (there is usually no problem to unmount FUSE thing because of I can just kill it's process). P.S. Already know mount fuser, lsof | grep, cat /proc/*/mounts | grep and obsolete non-working "badfs patch".

View 3 Replies View Related

General :: How To Change Invalid File System's Name

Apr 10, 2011

when I got following some information using fdisk -l,there were some invalid information about system name.I installed file system reiserfs, xfs on sdb6, sdb7.but the system didn't recognizes disk's file system name.

View 1 Replies View Related

General :: Cannot Run ARPD Command - Invalid Argument

Aug 17, 2010

I've a problem when I try to run arpd program to support my honeyd software but when I try to execute it then it shows this error message
arpd: intf_get: Invalid argument
My arpd installation based on this tutorial [URL].

View 2 Replies View Related

General :: Dmsetup Create Invalid Argument?

Nov 3, 2010

I am getting the following error message when running dmsetup command:

dbacb01:~ # echo 0 4096 linear /dev/loop1 0 | dmsetup create new
device-mapper ioctl cmd 9 failed: Invalid argument
Command failed
dbacb01:~ # uname -a
Linux dbacb01 2.6.5-7.282-smp #1 SMP Tue Aug 29 10:40:40 UTC 2006 i686 GNU/Linux

View 1 Replies View Related

General :: How To Get Invalid User Input Into Variable?

Apr 8, 2010

I have a script in which it searches the password file for a username based on the user's input. Is there a way I can take the bad input and keep it in a variable. (one that keeps adding all the non-existent users)so how would I get non-existent users into another variable?

View 9 Replies View Related

General :: When Type Ifconfig - Invalid Argument

Jul 1, 2011

When i type 'ifconfig eth0' the outcome is 'SIOCSIFADDR : invalid argument', but when i check the ip address using /sbin/ifconfig i see the ip address is updated to and is up. When i restart the linux box,the /sbin/ifconfig is reset to .what should i do so that the linux box /sbin/ifconfig should not change when am rebooting.

View 12 Replies View Related

General :: Invalid Or Corrupt Kernel Image

May 5, 2011

I installed unetbootin, and picked linux mint because i heard mint is for beginners.I use HP mini, and connected USB drive.after installation is completed, restart machine, and changed boot order,this was on screen;"Invalid or corrupt kernel image"boot:press tab key for options.

View 1 Replies View Related

General :: Working Or Not Then Message Comes Invalid Password?

Jan 19, 2011

i using centos 5.5 i have applied grub-md5 password to avoid to go single user mode and what happened someone knew this password then i have applied a new grub-md5 pawword and try to go to single user mode of the purpose it is working or not then message comes invalid password and i also try to previous password same message was on the screen right now i m unable to go single user mode and i have deleted it grub.conf and try to go single user mode then i m able and i again applied the grub-md5 password and try to go single user mode then same message invalid password why it is happning and what should i do ahead.

View 3 Replies View Related

General :: Sendto Failed -1 : Invalid Argument?

Sep 10, 2010

I'm not sure why the sndto() is failing.

STATUS send_request(const packet_t * pkt)
int fd = -1; /* socket filedescriptor */


View 1 Replies View Related

General :: OSError: [Errno 22] Invalid Argument

Apr 19, 2011

iam having a problem while using the urlwatch utility in linux

/usr/bin/urlwatch --urls=/home/etika/Desktop/etikaa.txt
file pathname is /home/etika/Desktop/etikaa.txt

when ownership is tomcat it doesnot run when ownership is etika(which is the user on the system through which iam running my script why the file which is passed to urlwatch is not accepted if that's file owner is tomcat6 it gives the following error

Traceback (most recent call last):

File "/usr/bin/urlwatch", line 221, in <module>
for job in handler.parse_urls_txt(urls_txt):
File "/usr/share/urlwatch/urlwatch/", line 128, in parse_urls_txt
shelljob_errors.append('%s not owned by %s' % (urls_txt, os.getlogin()))
OSError: [Errno 22] Invalid argument

but when the ownership of the file is changed to etika it run smoothly why urlwatch does not run when the file containing the urls is owned by tomcat with full 777 permission but run with etika (user on the system) through this iam running my shell script

View 2 Replies View Related

General :: Invalid Or Incomplete Multibyte Or Wide Character?

May 13, 2011

I'm trying to backup an ext3-formatted disk to an external USB disk, also formatted in ext3.rsync repeatedly reports those kind of errors : rsync: recv_generator: failed to stat "<filename>" : Invalid or incomplete multibyte or wide character.Following Google, this is usually related to NTFS-formatted drives but it is not the case here.A lead to the solution could be that the folders and files being backuped are mapped through smbd. My smbd.conf file contains the following lines regarding charsets : #Dos charset = 850#Unix charset = ISO8859-1Since those lines are commented out, I believe this defaults to UTF-8.

View 6 Replies View Related

General :: Installing OS - Invalid System Disk Error

May 25, 2010

I have a computer I recently uninstalled the operating system from and was wanting to use Linux Ubuntu. After burning the cd and trying to install it to the computer it gives me "Invalid System Disk, Replace then disk and press any key." I am unsure how to start this and I am not even sure if I have all the files, I need to install the Linux Ubuntu 10.04 operating system step by step.

View 4 Replies View Related

Copyrights 2005-15, All rights reserved