Ubuntu Networking :: Internal IP Address Change?
Apr 16, 2010
Now I'm not too clued up about networking and IP addresses. However, I know that I have an IP address for my router (which is dynamic) and then all of my machines have internal address e.g.
192.168.0.2
192.168.0.3
etc...
My server, had the internal address of 192.168.0.4 but now has changed to 192.168.0.7 what causes this to happen? I have to change my port forwarding on my router to allow access to my server from outside my network.
View 3 Replies
ADVERTISEMENT
Jun 7, 2009
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies
View Related
Jan 13, 2011
As I try to change my if0 MAC address either from /etc/networking/interface, or from GUI application, when I try to reconnect (through GUI) the application automatically creates some sort of alias interface with the default MAC every time, and leaves the one with the changed MAC aside.
View 9 Replies
View Related
Apr 11, 2010
I have followed some instructions to change to a static ip address and have now lost my connection to my router. The mistake I made was not copying the original "interfaces" file before making changes.The file originally had: auto wlan0 iface wlan0 inet (something - I thought it was loopback but didn't work when I added it).
The instruction told me to put:
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Which I did, using my own ip numbers, except for "broadcast". I didn't add that in because I didn't have a clue what to put there. When it didn't work, I tried putting it back to what I originally had except I can't rememebr that last bit. I added dhcp instead of what I thought it was but this didn't work either.
View 9 Replies
View Related
Jun 10, 2010
My laptop has an internal Broadcom wireless adaptor. It works fine for basic Internet access, but I cannot change the MAC address with ifconfig. I would like to be able to change my MAC address. Since this is a laptop, the only option for me to do this is a USB wireless adaptor. But compatibility is very hit-or-miss. I've already tried two USB adaptors that had been stated to be compatible with Linux, and while both worked for basic functionality, neither allowed me to change the MAC address.
For whatever reason, this information seems very, very difficult to find. I have spent upwards of ten hours cumulatively searching forums (including this one) and other resources, and have found only vague, outdated, or outright false information regarding USB adaptors that support this. I believe I will be doing a great service to other users like myself by getting this question directly and conclusively answered for once, and the more responses, the better.
Questions:
Do you have (or know of) a USB wireless adaptor that actually allows you to change the MAC address?
If so, what is the specific brand and model number, and what steps were necessary to install the drivers?
View 8 Replies
View Related
Feb 17, 2009
Some people may need to change the mac address of their ethernet network cards. This can be easily done with fedora with command line. Just follow the steps below:
1. Log as root on a textual console (ctrl+F2) or through "su -" command in your console
2. Print your network configuration with ifconfig
[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:23:8B:6A:7E:9E
inet addr:10.1.128.244 Bcast:10.1.255.255 Mask:255.255.0.0
inet6 addr: fe80::218:8bff:fedb:7e9e/64 Scope:Link
[code].....
Here, eth0 is the ethernet interface of your system. The mac address is put in red.
3. Change your mac address using the following syntax
ifconfig eth0 hw ether 00:18:8BA:7E:90
The new value (in green) must be hexadecimal
4. if you have a dhcp server that distributes the adresses automatically, then request a new adress for your eth0 interface
[root@localhost ~]# dhclient eth0
5. Now, your interface is up and have a new mac and IP addresses. This feature may be useful if the network administrator ban you according to the mac adress, for example .........
[URL]
View 1 Replies
View Related
Mar 26, 2011
I've just reinstalled F14 with KDE rather than Gnome and I'm finding that I'm unable to assign a static IP address to my wired connection.
KDE automatically connects via DHCP, but when I go into KDE's network manager, the eth0 connection isn't listed. In fact, no wired connection is listed. If I manually add one with the correct settings (including a static IP), it switches back to DHCP upon rebooting.
How can I get around this? Should I install the networkmanager-gnome package?
View 5 Replies
View Related
Mar 3, 2010
I need to change my Mac address to be the same as another computer. My university for some reason only allows 2 computers per jack i think! and i have 3. for some reason when i plug my 3rd PC in i lose connection on my other two. i have a win 7 laptop and a Ubuntu laptop. I want to setup a small server since my school blocks all ports off campus i can't use it off campus but i want to use it on campus.
My 3rd PC is a ubuntu Desktop is there a program i can use or a command i can use to spoof the mac address.
View 1 Replies
View Related
Dec 11, 2010
I purchased a Dell Notebook n4030, that came with the wireless adapter from Broadcom BCM4313. It's been a while since I've been battling with the Broadcom driver to make it work perfectly. I did it!
But some servers I work with wireless in my town and I need to always be changing the MAC Address of my wireless adapter. Whenever I make the change, which is in the Linux distribution is already using it, when I enter the command:
Come to me the message:
Then I give an UP interface, but after that the adapter does not get the IP address of the network.
View 14 Replies
View Related
Jan 22, 2010
how can I change eth1 mac address permanently in an easy way?
View 1 Replies
View Related
Nov 14, 2010
Does anyone know an easy way to do this? I can't seem to figure it out.
View 6 Replies
View Related
Jul 29, 2011
change my WLAN0 MAC address in my Kubuntu Natty 64 bit at every boot. I have done quite a bit of searching and found some procedures that appear to have worked back in 9.04 and before days but I have been unable to get anything to work for me in my 11.04 install. I have tried adding a script to if.pre-up.d and also tried adding a bootmisc.sh and either I did them wrong or they are not working. I want to make sure that every time I bring the wireless up in Kubuntu that I have the changed MAC address. I usually keep wireless disabled and turn it on just when I need it.
Background so you don't think I am doing something nefarious... I am going on a cruise soon. The cruise line sells wireless internet subscriptions for the duration of the cruise but they tie it to a MAC address. I am bringing my CDMA android phone that unless I use VOIP will be unable to call at all or at least with very high charges. But I also want to be able to browse the internet with my laptop. I figure it will be easier to spoof my phones MAC with the PC than the other way around. I just need to turn one device off if I am using the other. I need the MAC address to be semi permanent so I don't turn it on by mistake and have forgotten to change the MAC.
View 2 Replies
View Related
Mar 3, 2009
I couldnt find something for changing mac address for wireless. how to do that....
View 4 Replies
View Related
May 26, 2009
OS:Fedora core 6
I have just changed my gateway address,now I can access internet with my browser but unable to run add/remove software as it says no network connection available,system updates are not working as well. What should I do make these working?
View 4 Replies
View Related
Jan 16, 2010
Can't change from dhcp to static ip address.I've installed Oracle's version of Linux Redhat 5, but I'm having no success changing from dhcp to a static IP address. My machine is plugged directly into a Belkin router which has the IP address: 192.168.2.1.If I use the gui: /usr/bin/system-config-network and set the network device to dhcp,it works fine. But if I set the IP address manually, I get no internet traffic, and if I ping an internet website, "network unreachable".The installation instructions for Oracle say that they want a full domainname. I've tried gateway.2wire.net. This worked in the last place I did a successful installation.It was the address of my ATT router. If I plunked that into a browser, I got the router configuration.
View 7 Replies
View Related
May 2, 2010
how can i change mac address in pclinux 2010 kde and can i do it by hand in interface file
View 1 Replies
View Related
Mar 31, 2010
when I do "route -n", I got:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
I need to change the static configuration, like I 169.254.0.0, I don't know how it got there also I want to delete 192.168.1.1 from a static gateway. How can I do this?
View 2 Replies
View Related
Jul 5, 2011
How to find and change mac address ?
View 5 Replies
View Related
Nov 9, 2010
In order to change the MAC address I do: ifconfig eth0 down hw ether ff:ff:ff:ff:ff:f0 When the ff:ff:ff:ff:ff:f0 is the new MAC address. Now how do I cancel that change and return it to the real MAC address of my NIC?
View 1 Replies
View Related
Sep 2, 2010
I have a second network card in my ubuntu desktop that I have sharing my internet connection with a wireless router. I have set the router to a static ip address within the network cards range. But, every time I restart the computer, the network card uses a different ip address. One time it will be 10.42.43.1, the next time it will be 10.42.46.1, ect. This makes me have to hard reset my router every time it does this. How can I set the network card to use the same ip address all the time?
View 6 Replies
View Related
Feb 14, 2010
I have a script that will change my desktop image to display all of my network IP address. I need to call this script whenever a change in the network occurs. Example, if I disconnect from one network and then connect to another network and get a new IP address.
View 1 Replies
View Related
Nov 8, 2010
My college providers shifted to a different setting.. I'm not sure what needs to be done. On windows, under the connections tab you need to change the proxy settings and put in the IP address and enter the port to 3000. Questions:
1. where lies the linux (ubuntu 10.04) variant to execute the operation.
2. What can be the major obligations of such a change?
I am sure its siimple enough, but I can't get my net to work properly. The connection provided to the internet is through wireless routers.
View 5 Replies
View Related
Dec 26, 2009
For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command
And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?
View 7 Replies
View Related
Dec 14, 2010
I am looking for a way via script to change a systems hostname and IP address!
View 1 Replies
View Related
Feb 24, 2010
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
View 5 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 12, 2011
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies
View Related
May 11, 2011
I'm a new user of "Debian Squeeze", using the testing repositories, and it's de first time that I post in this forum. I'm very happy to become a member of Debian comunity. Well, I want to change the "beep" sound of the internal speaker to another sound. I mean to any sound on my external speakers. I've searched about it but I haven't found anything useful.
View 1 Replies
View Related
Mar 15, 2011
I'm trying to customise my netbook and my wlan is my only rock in the path of a fully open source supported netbook ... Plug and play in linux Here's what I need to swap/switch :
Toshiba Satellite A300 Wlan (Intel) <---> Emachines eM350 Wlan (broadcom-wl)
View 1 Replies
View Related
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
View 1 Replies
View Related
