I've heard about the exhaustion of IPv4 addresses, and I roughly know what IPv6 is.how to check whether our hardware (network adapters, routers, etc.), and software (operating systems, browsers, etc.) are ready for the transition?
View 9 RepliesI used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View RelatedI have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
I am writing an script for sending emails with ssmtp email client in an appropriate form.I want to know how can I check mail server that I want to send mail to it if it exist and ready to receive email or if not log an error.
View 3 Replies View RelatedI've installed live usb-hdd using live-helper on my Lenny.
How to check if on this usb live IPv6 is enabled or disabled?
I have been dual booting between 9.04 and 9.10 for the last 4 or five months. I have had difficult transitions in the past, and I don't like to totally give up what is familiar right away, so I generally do a clean install on a separate partition, and I don't upgrade using the update manager.
My big question is regarding transitioning is is there a way to see what is installed on one system in a simple to print/download format that would make reinstallation through apt-get easier? A list command, or equivalent? With 10.04 coming out, I'd like to transition again, but I would like to do it with fewer (if possible) growing pains.
what is involved in upgrading from one major version of Debian to another. When your version is no longer supported, can you just get the DVDs for the current version and run the installer and it detects this is a previous version and only upgrades things as necessary?
View 7 Replies View RelatedI'm trying to start a service that depends on networking being started, whenever the computer is rebooted. Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works.How can I make a script that runs on boot which runs after networking has been started?
View 2 Replies View RelatedI've tried to install Linux systems have been failures. Trying to make this work, trying to get on the right wagon, and it's frustrating as all get-out.
Installed netbook remix onto a HP Mini 1000 (1116NR?) and everything seems to be working alright, except no wireless networking. I tried a couple of things and now it shows "device not ready" instead of "disabled", so I figure I'm getting somewhere.
The device is:
Broadcom Corporation BCM4312 802.11b/g (rev 01)
I want in. This is my 3rd try over the years of running Linux and I always hit snags like this that I can't fix because I've never gotten to play with it enough to learn what I'm doing and generally don't have a 2nd computer like I do right now.
All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.
View 1 Replies View RelatedI just recently installed ubuntu, my first experience with linux. I don't know if it isn't recognizing my wireless card or if it is another issue, but I am unable to view any wireless networks/connect to any. When I click on the network icon it says "wireless" with Device Not Ready underneath.
View 9 Replies View Relatedi am trying learn to program linux kernel modules and smoothly transition in device driver programming. I have a year and a half worth of programming in C and have been using linux for years!! But my question is how do i compile a module? I got as far as coding it but am stuck as of now.
View 2 Replies View RelatedMy installation has stopped detecting my wired network. Another computer connects fine with the same cable to the same access point. As far as I can tell it is simply behaving as if there was no network available from that cable but obviously there is. It was working a couple of hours ago, and I didn't install or uninstall anything, just shut down and booted up again.
LAN is enabled in the BIOS ifconfig does display eth0 ifup eth0 returns "Ignoring unknown interface eth0=eth0" in the output from dmesg:
"ADDRCONF(NETDEV_UP): eth0: link is not ready"
network appears in lshw and is not listed as disabled
I just installed Ubuntu 10.04 and I can't seem to get the wireless connection to function. Ubuntu either says that the card is turned off or if I toggle the wireless switch on my keyboard it then says 'device not ready.' I'm using a Dell Wireless 1397 WLAN Mini-Card, and it works fine when I boot in Windows 7.
View 8 Replies View RelatedI thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.
It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.
It seems to me I need a driver someplace...I don't know where or how to get it installed.
I have Ubuntu 10.10 installed on my laptop. My ISP natively supports ipv6, but since last weekend, I do not get an ipv6 ip. When I use a live cd however, I do get an ipv6 ip. For as far as I can see, all settings (/etc/network/interface and the settings in network manager) are exactly the same.
Output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet addr:XXX.XXX.XXX.XXX Bcast:XXX.XXX.XXX.XXX Mask:XXX.XXX.XXX.XXX
inet6 addr: XXXX::XXXX:XXXX:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
EDIT: is there a way to let the netwerk be automatically configured as happens during installation? It would be nice to start with a clean and new set of network config files as there were just after I installed Ubuntu on my system, without a full reinstall of my system.
The past couple days I've been attempting to use ndiswrapper to connect to my home network wirelessly and have run into a slight problem. I'm able to install ndiswrapper (of course), and install the driver. ndiswrapper -l comes up good, showing the driver is in place for my netgear wg311v3 card.
modprobe ndiswrapper I am able to get to work without errors, except, when i type ndiswrapper -ma it writes another file to /etc/modeprobe.d/ndiswrapper causing the deprecation error.
The card scans for networks, and I'm able type in my encryption key.
However it doesn't connect. | grep comes up with the error that the wlan0 link is not ready.
I think I've also been able to determine that the configuration I've put in to the card through the network manager is not actually configured.
Anyone know how I could possibly connect with the card.. It seems it should be able to work. alias wlano is also in place.
I recently got a Tplink TL-WN321G wifi device for my fedora box. It has a Ralink chipset rt2870 in it.After messing it with couple of hours, i got it working with rt2800usb firmware, the LED is blinking on it and the device is listed in available...but its not scanning for available networks..lsusb:
Code:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
I tried all the threads to load and compile the driver for the Belkin wireless-N F5D8053 (Ralink RT2870 chip) I still cannot get it to come up - the wireless status says device not ready. Here is some of the system info relating to the adapter:
terry@terry-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:14:bf:53:02:8f
inet6 addr: fe80::214:bfff:fe53:28f/64 Scope:Link
[code]....
i have recently installed Ubuntu 10.10 on my computer, which is HP 4710s ProBook.I've installed it with wubi and everything seem to be working just fine, except for my wireless.It is showing me: device not ready(firmware missing).
View 1 Replies View Relatedfresh install of 10.1 on an older sony laptop wireless icon is on the toolbar, and my router is listed icon has a red exclamation mark my wireless button on the laptop is set to "on" dmesg | ndis reports "wlan0: link is not ready"
View 4 Replies View RelatedI have an extremely urgent support request! I need to create a presentation by Friday. I have selected the template, the elements etc. But, I have to add transition between each text Outlines and each page. It's very easy to add page transition effects. But, so far I have not managed to add automatic custom effect in text transitions (with click).
For example, let's say that I have in page the following format:
Text 1
Text 2
Text 3
I want to present the elements as Text 1, then I click the mouse, Text 2 click the mount Text 3 etc. In MS PowerPoint this is done via Master pages.
I tried the same on OO/LibreOffice 3.3: Edit the Slide Master, modified the fonts etc. Then, I tried to add a custom animation in each element. But with no success.
First of all, it seems that any effect is named: Outline Text 1: Click to...
Second: Even If I accept the fact than there seems to be no way to add an effect for Outline 2 etc, I save and show the presentation. But, instead of a page transition then a blank page that requires a click from me to present the 1st element, I see ALL elements. So, is it possible to do that in OO?
I have a networking problem with my computer. Under Windows, the computer can get both v4 and v6 address via DHCP. However, the same computer can only get v4 address under Ubuntu. Does anybody know how to solve this problem?
View 3 Replies View RelatedI have tried to disable the ipv6 support in ubuntu 9.04 32bit but the /etc/modprobe.d/aliases does not exist so I can't disable the suport as sugested for the previews versions. I need to disable it becouse it is pounding a total maihem in my vamware machines.
View 7 Replies View RelatedThis morning I installed Fedora 14 on my laptop. During the setup, I was able to configure the wireless connection and use it to install additional software from the FreshRPMs and Livna repos. When the install was completed, I was surprised to find the wireless not working. When I click on the NetworkManager icon at the bottom right corner, I see "Wireless Networks" Under that it says "device not ready" and it is greyed out so it cannot be click on.
Running lspci -vnn returned
07:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
Kernel driver in use: ath5k
Kernel modules: ath5k
Running lsmod confirmed that ath5k is in fact loaded.
I hav googled and tried everything postedoso reinstall fedora 14but still doesnot workI try to install these 3 fileskmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686.rpmerr: kmod-wl-2.6.35.6-45.fc14.i686-5.60.48.36-2.fc14.1.i686 requires wl-kmod-common >= 5.60.48.36kmod-wl-5.60.48.36-2.fc14.1.i686.rpmerr:kmod-wl-5.60.48.36-2.fc14.1.i686 requires kmod-wl-2.6.35.6-45.fc14.i686 >= 5.60.48.36-.1broadcom-wl-5.60.48.36-1.fc13.noarch.rpmerr:broadcom-wl
View 3 Replies View RelatedI tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
some of you might have experienced the network speed problem that occurs when ipv6 is enabled. So have I. I know about the common workaround of disabling ipv6, but recently I tested the new ubuntu live system, and the problem was gone with ipv6 being enabled.
Now my question is: Do you know what ubuntu is making different? I haven't found an explanation. Is there a better workaround than blacklisting ipv6?
I cannot connect to wirelessly when I have IPv6 enabled for the wireless network card. It works great on ethernet, but if I enable it for the wireless card then I cannot even get IPv4.
View 5 Replies View RelatedI'm trying to assign like 80 IPv6 addresses on eth0 for virtual webhosting, but after 55 addresses I get the following error:# ip addr add 2a01:9f8:a171:1651::4b:a8af dev eth0 RTNETLINK answers: File exists.What's the problem? I don't understand that error message at all. Is the number of IPv6 addresses per device somehow limited?Ubuntu 10.4.1 server, 64 bit.
View 1 Replies View Related