Debian :: Check When On This Usb Live IPv6 Enabled / Disabled?
Feb 5, 2011I've installed live usb-hdd using live-helper on my Lenny.
How to check if on this usb live IPv6 is enabled or disabled?
ADVERTISEMENT
Debian :: How To Check Why GUI Not Enabled
May 31, 2010I have an Debian System on which GUI is not enabled. How to Check that GUI can be started by some command or that has to be reinstalled.
View 9 Replies View RelatedNetworking :: Ipv6 Stack Not Enabled On Centos 5.6
Jul 25, 2011I've got a little server setup on my local network and I'm trying to configure it to use miredo. I've got my laptop successfully using it, but for some reason miredo gives this error when I try to start it:
Code:
Error: IPv6 stack not available.
also running "lsmod | grep ipv6" gives these results
Code:
ipv6 270049 1 cnic
xfrm_nalgo 13381 1 ipv6
I get the impression that ipv6 is not enabled on my server, but I'm not sure how I enable it short of doing a reinstall.
Ubuntu :: X Forwarding Not Working When Ipv6 Disabled
Dec 20, 2010Got Ubuntu Server 10.10 installed as a virtual machine (vmware). When i forward X through SSH (putty) i can start xeyes, xcalc,etc.
Now when i disable ipv6 putty can't set the display variable and i get "Error: can't open display". I haven't changed anything in putty or win 7 (the host system).
I disable ipv6 by putting these lines in /etc/sysctl.conf
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
net.ipv6.conf.lo.disable_ipv6 = 1
Ubuntu Security :: How To Prove Ipv6 Has Been Successfully Disabled
Jun 26, 2010There seems to be much disagreement between distros regarding how ipv6 is disabled, even between different versions of the same distro. Rather than just follow instructions for disabling ipv6 for a given distro, I would like to also test that ipv6 is not used any more. Any software or executable that relies on ipv6, that I can use to confirm that ipv6 has been successfully disabled?
View 9 Replies View RelatedUbuntu :: Ctrl-Alt-Del Starts Enabled And Gets Disabled
May 26, 2010I had been asking how to enable Ctrl-Alt-Del to call the gnome Logout/Poweroff or whatever is the hidden name of the program to logout from the GUI in a Hardy system.
Today I discovered that once logged in the GUI, it stared enabled but, after three or four succesive calls (or a certain amount of time), it became disabled.
I don't know whether the ouput of dmesg and syslog give a clue. There's a strange interrupt.
Code:
$ dmesg|tail
[ 34.323721] apm: BIOS not found.
[ 34.462563] sky2 eth0: enabling interface
[ 34.466384] ADDRCONF(NETDEV_UP): eth0: link is not ready
[Code].....
Ubuntu :: FTP Will Not Function Until Ipchains Is Disabled/re-enabled Via Firestarter?
Apr 1, 2010FTP Server OS: Ubuntu x64 9.10 Client OS: Ubuntu x64 9.10 I have an FTP server on my home network. FTP Server: VSFTPD with TLS My FTP server is running with iptables configured using firestarter. Firestarter Inbound Traffic Policy "allow Service / Port contains the FTP service with the appropriate port range, vsftpd.conf port range is identical, as is the port range on my router.
My Client system, only after reboot or system power on, absolutely will not connect to the FTP server unless the firewall is disabled then re-enabled by way of firestarter then re-enabled. Only then will my client successfully connect and continue to connect until my client reboots or powers on. At which point I need to disable/re-enable iptables through firestarter.
Others can connect to my FTP server, but they use a mixture of Mac and Windows with default firewall settings. Has anyone experienced this with firestarter and ubuntu 9.10? I never had this problem using Ubuntu 9.04.
Ubuntu Networking :: Wireless Is Disabled On One Laptop And Enabled On The Other With Same Kernel
Aug 23, 2010I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network:
*-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
Ubuntu Networking :: IPv6 Readiness - Check Whether Hardware And Software Are Ready For The Transition?
Feb 10, 2011I've heard about the exhaustion of IPv4 addresses, and I roughly know what IPv6 is.how to check whether our hardware (network adapters, routers, etc.), and software (operating systems, browsers, etc.) are ready for the transition?
View 9 Replies View RelatedGeneral :: Check If Apache Was Configured With SSL Enabled?
Dec 1, 2010How can I check if my CentOS server has Apache configured with SSL enabled? I think Apache was installed with the default modules.
View 3 Replies View RelatedGeneral :: Check Which Apache Modules Are Enabled/installed?
May 17, 2011which is the most elegant way to check which apache modules are enabled?
View 3 Replies View RelatedUbuntu :: Check Whether The Hosting Company Has Fsockopen Enabled?
Oct 28, 2010How to check whether the hosting company has fsockopen enabled?
View 1 Replies View RelatedUbuntu :: How To Check Whether The Hosting Company Has Fsockopen Enabled
May 1, 2011How to check whether the hosting company has fsockopen enabled?
View 2 Replies View RelatedUbuntu Installation :: Live CD Is NIC Intentionally Disabled?
Sep 19, 2010I have looked at Ubuntu LiveCDs going back to Edgy, but regardless what version I'm trying or what box I'm trying it on, my wireless network card never works - I can never connect to my network.I've begun to believe that the NIC must be intentionally disabled on the LiveCD version. :/ Conversely, with Mint Linux and PCLinuxOS (for example) LiveCDs, I slap the disc in, enter my network key, and BOOM-- I'm on the internet.
View 4 Replies View RelatedFedora Networking :: Ipv6 With Tunnel Broker - Better Client For Non Native Ipv6 Connectivity?
Jul 22, 2009I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View RelatedFedora Networking :: FC15 IPV6 Wireless Router - No Longer Gets An IPv6 Address
Aug 31, 2011I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
Debian :: Migration Check List - To Check - Prepare Or Reconfigure
Feb 3, 2010I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
General :: Disabled Xfce-settings-helper And "check For New Hardware" - Mouse Not Working
Mar 31, 2011Running xubuntu 10.10, disabled xfce settings helper and check for new hardware under session and startup. After rebooting I'm greeted with the normal login screen but don't have mouse or keyboard support! I'm wondering if there is anyway other then reinstalling to fix this. I've got my hdd mounted from the livecd, is there a config file to reenable these, or a way to make them run on boot. Or is there a boot option or a means to start them another way?
View 1 Replies View RelatedUbuntu :: Turn Off Live CD Feature To Check Windows Drive?
Feb 3, 2010I used a Karmic Live CD to make a forensic image off of a older Windows computer that has a fat32 drive. Immediately after booting it said it was correcting a problem on the drive, I assume that it was running fsck on it. I want to customize my own live CD to not do this. Though I suppose it doesn't do it for ntfs since there isn't a fsck for it yet.
View 1 Replies View RelatedOpenSUSE Hardware :: Direct Rendering Disabled When Running Live CD Without ACPI And With ACPI It Doesn't Boot
May 29, 2011When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies View RelatedDebian Configuration :: Disable IPV6 In Lenny?
Sep 25, 2010Howto disable IPV6 in Lenny?
I added this line:alias ipv6 off in /etc/modprobe.d/aliases:# cat /etc/modprobe.d/aliases
# These are the standard aliases for devices and kernel drivers.
# This file does not need to be modified.
#
# Please file a bug against module-init-tools if a package needs a entry
# in this file.
[Code]....
alias ipv6 offbut howto check after restart if ipv6 was loaded or not?
Debian Configuration :: Setting Up NAT And Firewalling For Both IPv4 And IPv6
Mar 21, 2010setting up NAT and firewalling for both IPv4 and IPv6. The machine is headless, so everything must be configured via CLI. I've done all IPv4 firewall configuration writing iptables rules in a bash script so far
View 1 Replies View RelatedDebian :: Live Cd Login Info / 'user' And 'live' Are Not Working?
Nov 9, 2010I can't seem to find this anywhere. I have burned Debian 5.06 for i386 and trying to login when running the live cd. What is the username and password to get in?
edit....
I found 'user' and 'live' but they don't work.
Debian :: Create USB Live Using Live-helper Under Lenny?
Feb 1, 2011Howto create USB Live image using live-helper under Lenny?
View 1 Replies View RelatedDebian :: Disable Ipv6 Protocol - Could Not Connect To Any Websites With Iceweasel Or Midori
Jun 15, 2010When I go out of town I normally take my Acer Netbook to travel light. I ran into a problem over the weekend which I have seen before and couldn't find the cause. I used the wifi at the house I was staying at and could connect to the router via Wicd and ping outside IP addresses, however, I could not connect to any websites with Iceweasel or Midori. I receive the generic error that the browser is unable to connect. Now that I am back at my house I cannot repeat the problem, but have found a couple threads about disabling ipv6 protocol. The symptoms sound like a browser setting, but I couldn't find any settings that looked unusual.
View 2 Replies View RelatedDebian Configuration :: Setting Kernel Variable Error. Net.ipv6.bindv6only
Jul 8, 2010Since I got the liquorix kernel installed on my machine I got an error of setting kernel variable error. net.ipv6.bindv6only at boot time, since it wasnt a big deal I never looked further into it, but now that I had some spare time and I didnt want to see any errors on my machine I found a solution for it, with a little googling all we need to do is read the /usr/share/doc/procps/README.Debian and bingo no more error i hope this help anyone else with the same problem. I did the 3rd suggestion on that file to load the module in /etc/modules cheers.
View 4 Replies View RelatedDebian :: Xfce - NumLock Never Enabled At Login
Sep 23, 2010In a debian squeeze box + Xfce the numlock is never enabled at login. Is there some daemon or some configuration to turn numlock on everytime I log into my Xfce session?
View 14 Replies View RelatedDebian Configuration :: Vino Isn't Enabled Until After Logon
Jun 23, 2011I have a fileserver running debian 6 and I would like to be able to remote control it over VNC. I have enabled Remote Desktop in Gnome and it works, however I have to be logged into Gnome for it to work. Gnome doesn't enable vino before a user is logged in for some reason. This presents a problem as there is no keyboard or mouse connected letalone a screen.
I looked up the issue on google and found this: [URL] Long story short, I have to edit /etc/gdm/Init/Default and insert "/usr/lib/vino/vino-server &" just before 'exit 0' at the end of the file, and change "KillInitClients" to "false" in /etc/gdm/gdm.conf. I edited the first one as it says, but I can't find gdm.conf anywhere. I did however find a 'daemon.conf' in the /etc/gdm directory, and added the line there.
When I try to connect after doing the above, my vnc viewer (client) just disappears - no errors, message, sound - nothing. It doesn't even ask for a password. I checked the comments in the link, and the second to last comment suggests it's because of some negotiating-issue which should be an easy fix:
Turned out I had to enable connections to vino not related to my user account. To do this run sudo vino-preferences and duplicate the settings instructed here
Debian Multimedia :: Gnome Does Not Load If KMS Is Enabled
Mar 8, 2010Gnome loads without problems when Kernel Mode Setting is enabled. Original message
Daily updated Debian Testing | Custom Gnome installation
Intel GS45 chipset | Intel GMA 4500HD graphic card
The title is rather vague because I haven't been able to identify the cause of the problem. I installed Debian Testing using the daily builds of March 6th and 7th with the same results: the system fails to load the Gnome desktop after the log in. Instead, a pale blue background is shown. No panels, no window manager, nothing. I can move the cursor but there's no context menu and the key bindings don't work, turning the session useless. The problem exists in all accounts, and persists even when the dot-files are deleted after the first Gnome start.
After trial and error, I found out that if I changed to a virtual console (VC1 to VC6) and go back to VC7 (sometimes VC8), the Gnome desktop loads as expected. The pale blue background is shown over/instead of the actual background and I need to cover ("paint") it with a window to show the actual one. This pointed me to a Gnome Session or a graphics card error. Indeed, if I disable Gnome Session, the Gnome desktop loads after the log in. Of course, no interface settings are set. I checked the Gnome Session's bug list without luck and the error messages in .xsession-errors aren't conclusive, for they appear in other cases.
About the graphics card: the video settings work (screen settings, 3D accelaration, recovery after suspend to RAM/disk) but Xorg's log shows several erros and warnings when setting up the system (mostly related to the video and touchpad settings). Right now, I'm building a custom xorg.conf file to try to decreases udev's errors and see if it affects the Gnome problem. I've spent hours trying to solve this problem. It's annoying to lose interface settings after closing the session (key bindings and brightness settings, for example).
Debian Multimedia :: Audio Devices Not Enabled?
Sep 18, 2010On a fresh install of squeeze (with the exception of some installed video firmware and the latest updates from the repos) from the kde cd.
System is running an ASUS Sk8V motherboard with onboard sound, also a SB Audigy 2 ZS sound card. Speakers are plugged into the sound card.
Sound worked fine before in Lenny except I had to create /etc/modprobe.d/sound with the following to get the system to prioritize the SB card over the onboard audio
options snd-emu10k1 index=0
options snd-via82xx index=1
I've done the same with the new install, and still no audio.
I followed the troubleshooting steps from the FAQ forum, but am stuck on the end, which suggests doing the following:
The following string needs to be added to the /etc/modprobe.d/alsa-base.conf file
options snd-hda-intel model=YOUR_MODEL