Got a used Lenovo Thinkpad r61i and put Ubuntu 9.10 on it. Every time I turn it on it prompts me to give it a password for someone else's internet. This a password I do not know and I use an ethernet cable for internet so it's really annoying. Any way to make it stop?
View 1 Replies
I have Ubuntu 10.04.1 32bit installed on my flash drive so wherever I go I can have my own mini personal computer, but one problem I'm having is every computer it is run on the next time it's rebooted to the OS on the hard drive it has UTC time instead of the actual time for the timezone you're in that Windows uses. So is their a way I can make Ubuntu not automatically change the clock to what it wants?
View 2 Replies View RelatedI have a windows computer that has a virus on it. This computer isn't worth much so I don't want to get a virus program to clear it. I know the virus probably won't be able to crash the linux OS, but will it be able to transfer itself to flash drives if I am running linux?
View 10 Replies View RelatedI clicked "remember" on a page, and now I have to depend on my USER login to provide me security. I am SCARED of this thing.
View 4 Replies View RelatedI'm having some problems of security in my Fedora 12... excess of security. It keeps me asking mi password everytime I want to perform an operation, and in some cases I'm pretty sure that this hampers me to work with some files.
Everytime I boot it, it asks about the password for the wireless network, and when I fill that out, another window pops up saying "Enter password for default keyring to unlock" (I press the "deny button" always for this one as it doesn't accept my user password.
I'm a newbie in linux and in programming, so I spend the days facing problem after problem and it's starting to drive me crazy. I'm not the root of the computer, but just a superuser (I hope that's not the problem)
Isn't it possible just to put my password when I start and then work without writing it anytime?
I am following the instructions on Section 8.1.* Device Driver ConceptsHere I was able to proceed till section 8.1.4.After making the hello.c file,the make file and patching the Kconfig as mentioned,I tried to run the $ make ARCH=ARM CROSS_COMPILE=xscale_be- gconfig This gave error as:make: *** No rule to make target `gconfig'. Stop.I am not sure if my kernel is correctly compliled,but I was able to complie and build the kernel for arm before by cloning the kernel and building from the following link without any error. https://omapzoom.org/gf/project/omap...ux+OMAP+Kernel
View 2 Replies View RelatedHow to make users, groups, paswords and their IDs be the same on several computers (for example, on cluster)?
View 6 Replies View RelatedI am using an internal toy svn server, and svn client seems to be configured to store passwords in gnome-keyring by default. How can I disable it or at least switch to kwallet?I am using Debian Testing.
View 2 Replies View RelatedI wonder if it is possible to have two passwords for one user account in 9.10. I have a long login password (5 words about 45 characters with spaces caps). I would like to set a shorter password for Authentication, sudo, etc. While retaining the original for logging in.In short:Have long password to login to computer.Have short password for everything after login.
View 6 Replies View RelatedI am running Ubuntu 10.10 on a brand new laptop, an install done by the company I ordered the notebook from. I have some limited experience with Linux and Ubuntu especially.I know that I'm not connected to a wired network. I haven't so much as plugged in a network cable, but the graphic appears erratically on the right hand side of the screen like I am connecting, then disconnecting. I've tried disabling the eth0 connection altogether, but no dice. I can't figure out how to make it stop.
View 7 Replies View RelatedI'd like to know if something like this already exists :have an ecryptfs encrypted user account on a laptop that accepts two logins, 1st logs normally, the second triggers a system format
View 6 Replies View RelatedHow to I get linux to stop prompting me for a password and remember it? For instance, when using the root user, I always get prompted, but I would rather only be prompted once per user session.
View 1 Replies View RelatedI know one way is to enforce rules on the passwords, use at least one uppercase, lowercase, number, special character, and ensure that the password length is at least 8 characters, etc...
Is there an additional way to prevent weak passwords? I heard of "John the ripper". Has anyone successful applied that?
I am so confused! I changed my security profile to 'paranoid' (i'm a linux noob' and accidentally locked my self out of everything! Including su, sudo, YaST, etc. (openSUSE 11.1)
View 9 Replies View RelatedI have a linux workstation running RHEL5 Client. It has two NICs, Broadcom NetXtreme BCM5761 at PCI:9:0:0 and BCM5722 at PCI:23:0:0. The drivers are both tg3 from broadcom. Is there a way to make both NICs recognizable by the system?
View 14 Replies View RelatedI just reinstalled Ubuntu at least twice for this problem: Minidlna starts fine for a few minutes, I can see it on the network with my television, windows and even my phone. However, after a few minutes (say one hour), it stops being there. The process keeps running, and is kinda responsive to rescans and restarts. However it becomes unusable after a few minutes. The last reinstall was pretty basic: Installed Ubuntu 9.04, upgraded to 10.04 (servers), installed minidlna, wait and... bam! So there were no conflicts in all that, so what could make minidlna stop being responsive?
View 2 Replies View RelatedI used to have ettercap on backtrack 4 and everything was ok...But on ubuntu 10.04 I'm having this issue; it is not showing passwords (if i log in for example in a forum with a http link )and not sending false certificate (if i try to log in in https links, after uncommenting the redir ip tables in etter.conf).Other features seems to work alright (such as dns spoofing) and the arp poisonning is succesful. Besides, Wireshark gets the passwords.
View 9 Replies View RelatedI am running an Ubuntu 64-bit and Windows 7 64-bit machine and I have set up an SSH between them and for whatever reason the passwords won't work; I receive the following error when trying to log on from either computer..I own both of the computers so I have full reign over them, so I'm assuming it should be an easy fix but I'm not sure about what to do.
View 14 Replies View RelatedTrue or False: If you have a user on your Linux/Samba machine with a password, example:
User = Bob
Password = Password0
And Bob is on an XP computer, where his username is also Bob and his password is also Password0, is it normal for Bob to go to:
\SambaServer, double click on Bob's share (valid users = Bob only) and Bob get RIGHT in without being prompted?
On my prior setup, the user HAD to log in. If they wanted auto login next time with their credentials, they had to check "remember password." But now it's as if Samba knows who they are. It's very strange. What's the normal behavior? Must EVERYBODY authenticate with passwords, or if the Windows credentials are the same as Samba does it just somehow auto-detect it and allow them through?
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
View 1 Replies View RelatedI am compiling libmp3lame from svn and I got following error No rule to make target `basic.html', needed by `all-am'. Stop. which package am I missing.....??
View 9 Replies View RelatedWhy, after a successful (I thought) dual boot installation w/ a side-by-side lynx and meerkat install and XP does my system refuse to boot? It just gets to the Dell screen, giving boot options (none of which are making any difference) and keeps looping it. Last night, after re-installing the grub (lost after the XP install) everything was working fine. I powered down and this morning tried to restart and...this. I really don't want to have to reinstall everything and reconfigure and reinstall apps--what can I do? And more importantly, WTF did this happen to begin with?
View 1 Replies View RelatedI needed an open source alternative to after effects so i went for jahshaka but after following the instructions, i type in 'make' and hit return and it says "make: *** No targets specified and no makefile found. Stop." am i missing something obvious? i have looked around the web, but no-one has this problem that i can find i am using ubuntu 10.04.
View 2 Replies View RelatedI'm using fedora12 with KVM. I'm also using iptables for filtering and nat. Problem is when I start libvirtd, it overwrites my current iptables and iptables config file (/etc/sysconfig/iptables).
Ok it leaves an old copy in /etc/sysconfig/iptables.old, but the main problem is that it removes also all my custom settings from filter and my full nat. I would like the keep control on my iptables and like to manage them on my own. But I cant find an option in the libvirtd config files and/or the libvirtd startup scripts to prevent libvirt from changing my iptables. how I can make libvirtd stop tempering with my iptables?
make /usr/bin/make all-am
make: Nothing to be done for `/usr/bin/make'.
make: *** No rule to make target `all-am'. Stop.
whats wrong with this???
I am doing samba file sharing. I got struct in problem relating reading passwords. I have to read password whatever user enter from web interface and process it. And through that password and username the user must log on from windows system. I have to write appropriate shell script for this. this is all i am doing for sharing files through samba.
View 2 Replies View RelatedI am using gnome's nm-applet as the client for NetworkManager. However, it seems that nm-applet will not save network passwords, so I have to retype the password on each connection. I already have gnome-keyring installed, so I'm not sure what the issue could be. I read online somewhere that secrets are retrieved through polkit or something, but I am completely unfamiliar with polkit and such.
View 1 Replies View RelatedI have a headset microphone plugged into the built-in audio input. The output is plugged into an amplifier > speakers.
Pulseaudio is "helpfully" routing the microphone input signal to the speaker output. I do not want this. I go to pavucontrol and disable the "monitor of the internal audio analog stereo" -- and what I say into the microphone is still coming out of the speakers.
Google gives a lot of information about how to live-stream mic input over the Internet. And, I found this here (that's for karmic, I'm running lucid):
[URL]
... but that's about how to ENABLE loopback. It says loopback should not be enabled by default, but I very clearly hear that something is doing the same thing as loopback.
(Of course, I need to hear sound from applications that are playing, and when I'm dictating text into NaturallySpeaking running under virtual box, I need sound input to go there -- so turning the mic all the way down to zero is not the solution.)
I'm fairly sure I remember hearing this behavior ever since installing Ubuntu, and I didn't do anything to turn it on. I can't imagine most users would prefer this behavior -- if it's the default behavior, why? It makes absolutely no sense to me. (Sorry. It's one of those piddly little configuration things that costs a couple of hours of web searching time, and after a while I just have to give up, but not before becoming much more frustrated than I should have to.)
So, to be clear, here's what I want:
- Applications playing audio should send sound to the main output.
- Applications receiving audio input should hear the microphone.
- Microphone sound should not EVER go to the main output unless I have explicitly launched an application making the connection. (The signal goes input -> output even when NO application is open - hence my consternation.)
I am using a Linux machine with a KVM switch at work, and I commonly use emacs while switching between that machine and my other machine. I typically use the keyboard shortcut to swap between machines on the KVM, which is the key sequence: Scroll Lock, Scroll Lock, Up or Down. If I have an emacs window on top on Linux and hit these buttons, it will trap the Scroll Lock key presses and trigger a system beep from the CPU speaker. The KVM still switches, but on occasion, after the switch, it will register Scroll Lock as being stuck pressed, and so I'll be treated to an earful of system beeping. I have to switch back to the computer to get it to stop.Is there something I can put in the .emacs file that will prevent the program from beeping when I hit Scroll Lock with the window on top?
View 1 Replies View RelatedWe have a Windows server at work that has several shared directories. For whatever reason the lab administrator has required clear-text passwords for it. There is a registry tweak for Windows boxes. Nautilus can't mount shares because it is trying to use an ecrypted password. Ironically enough the Windows VM I have running in Virtual Box can mount the shares.... smbclient can see the server and shares if I specify a clear-text password option.
View 1 Replies View Related
