Ubuntu Networking :: Router Not Working/ Can't Get To Internet?
Apr 29, 2010
I am trying to set up a basic router. I am running ubuntu server 10.04(just installed it today!) I have a verizon aircard(mobile broadband card) that is connected via usb. I am using wvdial to "dial-up" the connection. This works just fine and gives me a device on ppp0. There is a single lan connection on eth0 set up as a static ip address under /etc/network/interfaces. I don't even have any firewall running yet. For whatever reason, I can only get out on the internet when eth0 is set to get its ip address through dhcp. When I set it up with a static ip, I get for example:
$ping 4.2.2.2
From 192.168.1.1 icmp_seq=1 Destination Host Unreachable.
$ping google.com
ping: unknown host google.com
If, however, after I have booted and the wvdial has been started, I set up eth0 as dhcp, run /etc/init.d/networking restart, set it back as static, run /etc/init.d/networking restart again, all work well. When I reboot the system with the static ip on eth0, and connect to wvdial, I get no internet again.
View 3 Replies
ADVERTISEMENT
Aug 20, 2010
My internet works fine if I plug directly into the modem, but if I go through the router either using ethernet or wireless it doesn't work. I can access the router perfectly when using wireless and change settings and all that but cant access the internet. From what I've read it isn't a DNS issue because I cant get a result from pinging an ip, so I think it may be something firewall related but I'm unsure.
View 2 Replies
View Related
Feb 12, 2010
Useing gnome network manger. I thught that is DNS resolve problem, and wrote in linksys router the same DNS as 3g huaweii modem use. Steel the some result. NO INTERNET. Change for static ip in router and try use the same gatway , but steell can't use connected at the same time to internet with 3g and local router.
Only one devace at the same time, Router have no any acces to internat. SO why 3g internet stoping working after connecting router to LAN ports? Has it some thing to do with subnet or ip range and routing table?
View 1 Replies
View Related
Apr 24, 2011
running ubuntu 10.10 on a toshiba laptop recently the wireless Internet stopped working from our netgear router, it still works for the Ienova laptop and emachines desktop using the router but this laptop will not work wirelessly internet cuts in and out on this laptop when on wireless when it didn't previously do so it reads a connection but will not load up web pages unless hard wired in with an ethernet cord.
View 3 Replies
View Related
Feb 21, 2010
just installed Ubuntu Netbook remix on my acer aspire one, and come across a problem Ive never faced before. Im able to Connect to my router (and access it through the internal ip address) but as soon as i try access anything outside of my network there is nothing!
This i found odd as first i thought it might have just been my Routers problem, but seeing as all my other computers were connected to it with no problems (wired and wireless) I quickly traced the problem back to the laptop.
After this i decided to see if after a simple update would fix the problem. so i connected it up through the Ethernet port once again it connects to the router but no internet! I have tried everything in my knowledge, but with no success!
View 9 Replies
View Related
Sep 26, 2010
I am connected to my wireless network but can't connect to the internet. I have searched the ubuntu forums for solutions but none seem to work for me. I can post terminal outputs if required (I know that much).
View 8 Replies
View Related
Feb 11, 2011
How can I find the IP of a router wirelessly so I can use the second router for a better signal? (A farther reaching wireless card is what im trying to make it do)
also how can I find the subnetmask this way?
View 4 Replies
View Related
Feb 14, 2011
My router is a Netgear router with Comcast, and after going on Ubuntu for a couple hours just doing normal things, the Internet disconnects. Then I have to restart my computer and start everything over again. I check the router and everything seems to be fine, I even unplug everything on the router first (like I am instructed to do so if this sort of thing happens) to make sure that's not what is causing the problem. It has to be the Ubuntu system.
View 4 Replies
View Related
Feb 25, 2011
I am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
View 1 Replies
View Related
Sep 1, 2011
I'm running a Natty machine wired to a TP-Link router (TL-WR841N) with additional Ubuntu and Windows machine on WiFi. Recently I've had some problems with connectivity on the Natty machine. Connectivity is fine as far as the router, but not beyond it. This applies to all browsers, Software Center, Aptitude and anything else you can think of. Now, normally at this point I would call my ISP, but the thing is, all other machines have connectivity. I've checked the cables twice and anyway, if it were them, I wouldn't be able to ping the router. Router has ping functionality to outside and it's working, have tried ubuntu.com and google.com. Also, connectivity between the wired and wireless machines is fine, pings are flying across the network beautifully.
View 5 Replies
View Related
Apr 21, 2010
is there a possibility to connect to my router admin zone from internet using wan ip? from lan I can do that using 192.168.x.x IP but when Im in work and something go wrong at home how can I check configuration of my router from outer world instead of lan?
View 7 Replies
View Related
Jul 1, 2010
I'll state the issue and then give whatever extra details are needed. I'm running Ubuntu 10.xThe Linux box is connected to a router via ethernet. That Linksys router is bridged to an AT&T router.The bridging is working fine. The AT&T router's page shows the IP of the Linux box and lists it as a device. The Linksys page shows no errors with packet transmission and receipt. I can ping the Linux box from any client on the AT&T router, and can ping the AT&T clients from the Linux boxI had set the IP of the Linux box to192.168.1.201 while configuring that router, as I had set that router to 192.168.1.200 and it just seemed orderly.The network preferences show eth0 being set to auto dhcp, but the IP is still set to .201 so I don't know that it actually released or renewed.
View 5 Replies
View Related
Jan 9, 2010
I've installed ubuntu 9.10 64bit onto a usb flash drive and found that even though I can connect to my safecom adsl modem/router I can't get an internet connection, the previous versions work and it works with a Linksys router. Is this a known issue with a fix?
I'm using a Toshiba satelite pro!
View 5 Replies
View Related
Apr 18, 2010
I have a dual-boot desktop with Windows 7 and Ubuntu.Problem: Linux does not recognize my D-Link DWA-131 Wireless N USB Adapter. So, I can't access my wireless router or the internet.D-Link has a Linux driver for the DWA-131 posted on their website URL...that includes a readme file with long, strange, convoluted instructions on how to install the driver.
View 9 Replies
View Related
May 23, 2010
I'm a beginner in Ubuntu, I'm using Ubuntu 9.10.
Currently using a Dlink GLB-802c router and using a ADSL connection. I try to connect to the Internet but it is unsuccessful. Ubuntu is not indicating my router when I connect to the PC.
My PC is P4 and using USB to connect to internet, PC haven't a Ethernet interface.
View 1 Replies
View Related
Jun 9, 2010
Every time I turn on my ubuntu box, it somehow kills our internet connection... yes, even through the router. The internet will not work until I call tech support and they run a line test. Then it works again as if by magic. I'm at a loss. A friend suggested maybe ubuntu is trying to establish itself as the dhcp server on the network? I have ubuntu 9.04, 32-bit, workstation.
View 2 Replies
View Related
Jun 17, 2010
I bought a wired broadband dsl router to provide another layer of security for my computer running ubuntu. I just plugged it in without installing any software etc. It blocks the internet connection.
View 3 Replies
View Related
Jul 27, 2010
I have a desktop, a laptop, & a wireless router. The router, unfortunately, doesn't support dd-wrt, tomato, etc firmware, but I would still like to prioritize voip/web browsing over bulk Internet traffic. I hope I can offload the router's missing QoS to my desktop.
Is it possible to have the laptop's connection go from the wall to the router to the desktop, where the desktop could perform the QoS of tomato, then continue on to the laptop? I'm a bit of a noob to networking (subnets?) but do well enough following good instructions.
As for the program that would do the QoS... Don't some Linux machines basically work as super-powered routers for businesses? So there must be some package but couldn't find one. The closest I got was wondershaper but it only shapes traffic for the computer on which it's installed; it might form part of the solution but falls short on its own. other devices should be able to access the Internet normally if the desktop is turned off, & work with other devices like a (jailbroken) iPod Touch.
View 1 Replies
View Related
Nov 11, 2010
trying to run 10.04 netbook live from a memory stick with a view to installing it on my laptop. However although I can see my wireless router and connect to it I cannot access the internet. I have tried this on my laptop and desktop with the same result. I was however able to download Seamonkey browser using the software manager....this also cannot access the internet. Both of my PC's have no problem when using XP or Linux Mint.
I have also discovered that if I piggyback, using Ubuntu 10.04, on a neighbours open wifi link I can gain access to the internet. My wifi is using WEP protection but as I said I can set the link up to the router, entering the appropriate key code, and have a good signal strength, I just cannot access a google search page.
View 8 Replies
View Related
Jan 3, 2011
- CAN connect to other computers - ssh and vnc over the home network (via D-link 524 router).
- CAN get an IP address via DHCP
- CANNOT get internet connections - including router at 192.168.0.1
- CANNOT even ping router (but I get an IP address - weird)
- Other computers on the network CAN access internet
- Live CD could not access internet
results of ifconfig
Code:
Code:
I am wondering if his ISP could be doing this - he has received a warning letter about bitorrent. Could the isolate a single computer behind a NAT router?
This is the results from dmesg:
Code:
I have tried:
- to set proxy settings as "Direct internet connection"
- disconnecting power to (including 30 sec wait): modem, router, computer + unplugging ethernet from computer
- Live CD (he only had an old one 7.10) which also didn't connect to internet, but as I am remote, I couldn't do any more. We are downloading a 10.04.1 iso for him to burn tomorrow, and will try that again.
- Uninstalled Crashplan which was the last software that we installed (and it was working ok).
I am currently ssh'ing into another computer on the network that IS working, and then ssh'ing into my Dad's computer - including a VNC session (tunneled through both machines and router).
View 5 Replies
View Related
May 4, 2011
i recently connected this router to mahh modem..http:[url]....before router connection i was able to connect to internet via "pppoeconf command" but now i am not able to connect to internet from ubuntu ..i am still using lan cable coming out or router to connect it with pc..
View 2 Replies
View Related
May 5, 2011
If I have a desktop with a USB wifi adapter connected to the internet through an ethernet cable, is it possible to create a wireless network using the adapter that will allow other users to connect to the internet through mine? I'm in a fairly low-tech place for the next few weeks and getting a router isn't likely.
If it's possible, anyone have links or instructions for how to do it?
View 7 Replies
View Related
Jul 3, 2011
We just set up a password for our wireless router (D-link DIR-615). WPA personal. After doing that, I can no longer connect to the internet. I can connect to the wireless router, however. Same problem for the Apple Macs in the house. We called Dlink. The fix for a Mac was to add DNS servers (4.2.2.2) under TCP/IP But there doesn't seem to be anywhere to specify a DNS server in Ubuntu.
View 8 Replies
View Related
Jul 30, 2010
I connect my internet using pppoe to may DSL modem with bridging mode, and it goes fine until I try to put a wireless router between my PC and the modem. After I configure both modem and the router, I can run my wireless network fine by connecting it from a laptop, but my PC is unable to reach the modem at this configuration.
PC has address 192.168.2.100
Router has address 192.168.2.2
Modem has address 192.168.2.1
all with netmask 255.255.255.0
With bridging configuration in modem and automatic detect configuration in the wireless router, the wireless network run well, except the PC cannot ping the Modem saying that
Code:
root@firefly:~# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
From 192.168.2.100 icmp_seq=2 Destination Host Unreachable
Looks like my PC, which has Slackware 13.0, don't know how to reach the modem even they are physically connected.
1. how can I configure the modem, PC, and router so that the PC can reach the router? Do I need to do add route gateway from the PC?
2. How can I configure internet connection from the PC (before I use PPPoE)?
3. How can I configure the modem, PC, and router so that the wireless network is on?
View 7 Replies
View Related
May 16, 2011
I just installed and configured Slackware on an old computer I am using as a router.
The internet works fine on the slackware box (router) but all of the computers behind it are having issues. When browsing, some websites work perfectly fine, while others are slow to load, and a few don't load at all. I'm not really sure where to start on diagnosing this, so any help would be appreciated.
Also whenever I restart the computer, I have to use this command before the DHCP server will start. What do I have to do to get it to start up with the computer?
Code:
View 2 Replies
View Related
May 8, 2011
How can I successfully SSH using SecureCRT from the Internet to my Centos Linux box at home behind the router? I have a DGL-4500 dLink router. I configured a Virtual Server in the router for SSH 192.168.0.182 Protocol 6 TCP public port 22 ? private port 22 Schedule Always Allow Inbound Filter Allow All. Further I Enable DMZ for 192.168.0.182. I got my Internet IP address through "what is my ip website." Now every time when I try to SSH, I get a message "The remote system refused the connection". Here is iptables -L command output;
[root@localhost ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
Chain FORWARD (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
[Code]....
View 9 Replies
View Related
Jan 22, 2010
I just bought a TRENDNET TDM C4000 (=modem/ wiredrouter) and got it working. If I connect my computer with through the ethernet port directly, the internet will work. However, when I try connecting the ends of the ethernet cable on the modem and my wireless router, it's not transmitting. I know I set up the wireless router correctly because it worked with my previous modem. I just need to know how to configure my modem so that it works with my wireless router (D-Link DI-524).
I have a long wired ethernet wire to satisfy my academic needs for the internet at the moment but my mother is not able to surf the internet and it would be more convenient for myself to put the wire back to my desktop and have my laptop browsing wirelessly.
View 1 Replies
View Related
Mar 1, 2010
I changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies
View Related
Jun 7, 2010
when I was still at my university room where the connection would work after a few reboots. After moving back home the connection worked on and off for a day before not working at all. NetworkManager is telling me that I am connected and have an ip address, etc, but nothing is able to get an internet connection. I am able to ping myself but am not able to ping my router. Everything works fine on M$ and other PC's on the network, it's just my ubuntu 10.04 that is playing up.
View 9 Replies
View Related
Oct 27, 2010
At work, we (like almost everyone) are still full-on windows. I am currently trying to get away from windows because I am not a fan. my current windows machine (different from my Ubuntu machine) is accessing the wireless network fine, and there are no obvious problems there. Also, my Ubuntu machine can access my wireless network at home, so I know there are no driver issues. I set up the connection for the Ubuntu machine, and it seems to be connecting OK. I can ping internal IPs and by all statuses, the connection to the router is functioning. However, when I attempt to load a web page or ping a domain or external IP, it fails. I tried to ping the IP, thinking if that worked, it's probably the DNS, but pinging both domains or IPs fails. I have looked around at forums and posts, but none of them seem to match my issue (that's probably not true, but I am struggling to see the commonality).
Here are the results of "netstat -r":
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.45.0 * 255.255.255.0 U 2 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.45.5 0.0.0.0 UG 0 0 0 wlan0
And here is "ifconfig":
wlan0 Link encao:Ethernet HWaddr 74:f0:6d:XX:XX:XX
inet addr:192.168.45.49 Bcast:192.168.45.255 Mask:255.255.255.0
inet6 addr:fe80::76f0:6dff:XXXX:XXXX/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 3 Replies
View Related
