Ubuntu Networking :: Extremely Slow Internet Connection 9.10 Dell Inspiron 1100
Mar 2, 2010
I just got my internet working through the wireless card with some help. However, my downloading speeds are beyond extremely slow. While I type on this computer, I am downloading things @ ~500-700kb/s, but when I try to download the package updates etc for my Ubuntu 9.10 laptop, It downloads @ ~ 4k b/s- which is UNBEARABLY slow, putting me at 14h left to complete a 200 mb update. Dell Inspiron 1100. Ubuntu 9.10
View 8 Replies
ADVERTISEMENT
Dec 10, 2010
I've been troubleshooting this problem for several hours now and I'm out of ideas. My internet connection is fine in Windows 7 but an older computer I resurrected (AMD Athlon 1.7 GHz, 512 MB RAM, Fedora 14 Security Lab Spin) is having the stop-and-go's with its internet connection. It will work for very briefly, then it gets extremely slow, where any page I try to navigate to in Firefox 3.6 takes forever to load.I have a DSL connection and my DSL modem is connected to a Linksys WRT54G2 router. I set up a static IP in Windows but don't know how to do this yet in Fedora 14, and I need to get my internet connection working so I can troubleshoot further, but with it being so slow, I'm having to use Windows to search for problems and then switch over to the Fedora box via KVM (IOGEAR), which I also just started using. I don't think that would be related, but who knows.
View 14 Replies
View Related
May 25, 2011
I recently migrated from ubuntu 10.10 to xubuntu 10.10 on my Dell inspiron 1100. After many tries I "succeed" (with internet) in solving partially the issue related to the video chipset (Intel 82845G Graphics) by using a "vesa" driver in the xorg.conf. Some discussion here mentioned the possibility of deleting ASCI 8086:2562 from a blacklist in usr/bin/compiz but even with ghex editor I could not find any matching string. Hereafter my grub and xorg.conf for those who are interested. I have another issue now. How can I create an iso file of my installed xubuntu. I did download ubuntu 10.10 and created a CD but I migrated after to xubuntu (since most of the files were there) and it would be great to burn a CD of xubuntu.
[Code]...
View 4 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
May 28, 2011
my installed windows makes full use of the 32mbit connection. in fedora i get between 10kbit and 100kbit.this is very annoying especially while browsing the net or using the package manager to do updates or download new software. what could be the problem and how could i solve it?
i very much like the look and feel of fedora 15, but this just makes it unusable on a daily basis.
View 5 Replies
View Related
Jun 10, 2010
so i had Jaunty installed last week with no problem. But then i decided to install winxp, erasing it. I hated it, and reinstalled ubuntu, this time lucid.However, the internet has stopped working properly. I've tried wireless and wired connections and they either dont work or will load half a web page after a few minutes. A good deal of the time the browser will time out or fail to find server.The ethernet is working, so I'm assuming the issue is with a missing driver or the such. I have 10.04 32bit installed on Gateway MD2614u laptop.
View 5 Replies
View Related
Jul 23, 2010
I am currently facing a weird problem, It's that the internet connection becomes extremely slow when using static IP instead of DHCP when Im connected through a cable! The local network seems okay with both, but differs when using the internet!
I've ran a ping test and got the following results!
using static IP
Code:
$ ping -c 3 google.com
PING google.com (209.85.153.104) 56(84) bytes of data.
64 bytes from 209.85.153.104: icmp_seq=1 ttl=42 time=343 ms
[Code].....
When I used static IP i received only one packet while when using DHCP i received all three!! Also I lost 66% of the packets when using the Static IP connection! And most importantly, the speed, DHCP connection was 8 times faster than Static IP connection!
View 3 Replies
View Related
Mar 10, 2011
I have an old HP pavilion laptop (2005) that was useless.I installed Ubuntu 10.10 on it and it became a working computer again. It was excellent, snappy, it was as if I had bought a lower end modern laptop.Internet was working great.I did not have any complaints (in fact, I thought that a modern computer running Ubuntu would beat my so adored macbook, speed wise). For some time I had 2 efficient computer, a macbook and the hp with the Ubuntu OS. So on the last weekend of February, my internet got extremely slow on both computers. After that annoying weekend (February 28) the internet on my mac was good again,however, the internet on my linux continued to be messed up.I tried disabling IPv6 on my machine and on firefox, tried the openDNS, the MTU stuff, but nothing.I even formatted my disk and installed ubuntu again (all this using the installation CD).However, apparently the installation CD uses some of your existing configurations (for example, the layout of the close, minimize,maximize:menu buttons on the corner of windows did not go back to default). So I'm guessing whatever was messed up with the computer didn't change back to default or the previous configuration when I first installed ubuntu. To give you an idea of how slow the internet is, installing alien (terminal installation),I got low speeds of around 150B/s (no typo here, it was bites, not kilo bites) and the fastest around 5,000B/s. The fastest I got was downloading chrome at 6kB/s but that didn't last even a minute. So given that these transfer rates are obtained both on firefox and the terminal, I'm assuming it is not a browsing problem.
A thick headed solution, would probably be to install windows again to get the network configuration to "standard" and then install Ubuntu formatting the disk again (using the CD).I'm using ethernet,so,thinking it might be cable problems, I did try to use the cable that was on my mac on the machine with linux. No success there.
View 1 Replies
View Related
Nov 2, 2010
I installed Ubuntu 10.10 on a Dell Inspiron 6000 but when I connect the ethernet cable the computer detects that the cable was connected but doesnt connect to the internet.
View 4 Replies
View Related
Jul 9, 2011
the title says I have painfully slow(connection times out when loading google) ethernet connection on my new pc. This comp had similar problems with the OEM windows 7 install but now it's strictly a linux box so I'm anxious to get it fixed.
I'm running Ubuntu 10.04 and Slackware 13.37, and have wireless working on Ubuntu but haven't set it up on Slack yet. The only thing I've done so far is try to change speed and duplex using ethtool but it didn't work, the settings stayed the same. I'm writing from another comp so I'll do my best to post any info you request but I'll have to use a flash drive lol
View 2 Replies
View Related
Aug 22, 2010
I have an issue relating my broadband connection, which I am not able to solve. I hope and wish, that I would find some way out here.
Some introduction: I am using Dell Inspiron (i3 processor) laptop, which I recently bought. I have win 7 preinstalled in it. In win 7, the wired broadban connection (Airtel connection) is working fine and have no issues.
I have been using mobile GPRS(BSNL, Ltd) through bluetooth, and that have been working fine. But today when I tried to connect through landline connection, it didn't workout. But the bluetooth connection is still fine. When I tried to do the connection manually through Network Manager, it is not taking the MAC Address. Till now, after installation, I have not updated my OS.
I surfed the net and tried some commands, whose results I am posting below.
From a post I found out, that I should change my duplex settings (from 100 full to 10 full), but I could not get much. The corresponding commands and output,
I have posted below:
View 2 Replies
View Related
May 1, 2010
I just bought a basic Dell Inspiron 570 Desktop, and installed Ubuntu 9.10, and found that the wired internet won't connect. I've checked the wire, and confirmed that an Ubuntu laptop can get a wired connection using it, but the new Inspiron doesn't do anything.
The "Network Connections" dialog shows a "Wired connection 1" item, but Network Manager refuses to connect to it. ifconfig only shows the lo interface.
How can I get this wired interface working? Please, this is very frustrating. I can only assume it's some sort of driver issue (which seems rare with the wired connection), but I can't even run an update since I don't have an internet connection.
View 8 Replies
View Related
Jun 8, 2010
I have just installed 10.04 LTS on my Inspiron 1100 and I really want to get this video driver debacle taken care of! It seems that one cannot simply edit xorg.conf on 10.04 LTS as it's owned by root and I'm not sure how to acquire root access... I've read a couple of threads similar to this one here: [URL]. I can't save changes to the xorg.conf file...
View 2 Replies
View Related
Apr 28, 2011
Wireless problem with Dell laptop running Ubuntu 10.10
View 5 Replies
View Related
Dec 15, 2008
I use Slackware 12.1 and I have a big problem that I can't solve by myself. I'm connecting to a LAN where there are almost 20 PC connected, all with static IP.
my ip: 192.168.1.205
netmask: 255.255.255.0
gateway: 192.168.1.1
DNS server: 80.58.61.250, 80.58.61.254
I configured manually it but it doesn't works well. I set up the DHCP server on Windows 2003 so I tried to configure it with dhcp too. It gives addresses from 192.168.1.200 to 192.168.1.240 there are no PCs connected with DHCP at the moment, so my IP is only mine.
My problem is the following:
bash-3.1# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:3d:1b:ad
inet addr:192.168.1.201 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:fe3d:1bad/64 Scope:Link
Up Broadcast Running Multicast MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7041 (6.8 KiB) TX bytes:6282 (6.1 KiB)
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1810 errors:0 dropped:0 overruns:0 frame:0
TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90500 (88.3 KiB) TX bytes:90500 (88.3 KiB)
bash-3.1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 1 0 0 eth0
bash-3.1# ping www.google.es
PING www.l.google.com (66.102.9.99) 56(84) bytes of data.
64 bytes from 66.102.9.99: icmp_seq=1 ttl=243 time=78.7 ms
64 bytes from 66.102.9.99: icmp_seq=2 ttl=243 time=84.2 ms
64 bytes from 66.102.9.99: icmp_seq=3 ttl=243 time=75.1 ms
64 bytes from 66.102.9.99: icmp_seq=4 ttl=243 time=82.1 ms
64 bytes from 66.102.9.99: icmp_seq=5 ttl=243 time=82.8 ms
64 bytes from 66.102.9.99: icmp_seq=6 ttl=243 time=79.4 ms
64 bytes from 66.102.9.99: icmp_seq=7 ttl=243 time=82.3 ms
64 bytes from 66.102.9.99: icmp_seq=8 ttl=243 time=75.2 ms
64 bytes from 66.102.9.99: icmp_seq=9 ttl=243 time=80.7 ms
64 bytes from 66.102.9.99: icmp_seq=10 ttl=243 time=84.7 ms
64 bytes from 66.102.9.99: icmp_seq=11 ttl=243 time=75.0 ms
64 bytes from 66.102.9.99: icmp_seq=12 ttl=243 time=82.2 ms
64 bytes from 66.102.9.99: icmp_seq=13 ttl=243 time=85.1 ms
64 bytes from 66.102.9.99: icmp_seq=14 ttl=243 time=80.9 ms
64 bytes from 66.102.9.99: icmp_seq=15 ttl=243 time=87.7 ms
64 bytes from 66.102.9.99: icmp_seq=16 ttl=243 time=87.6 ms
64 bytes from 66.102.9.99: icmp_seq=17 ttl=243 time=83.2 ms
(...)
- www.l.google.com ping statistics -
49 packets transmitted, 48 received, 2% packet loss, time 560804ms
rtt min/avg/max/mdev = 73.624/80.945/87.725/3.823 ms
It takes a lot of time connecting to a internet web site! It's really strange because downloading a file the transferring rate is good, it takes some time starting, but it works normally. I wait almost 7 seconds after seeing a web site. All the others PC's (windows xp) can connect perfectly to network using static and DHCP. Trying with another wire in another room I've got the same result. My /etc/resolve.conf is configured with the IPs specified upper in this page.
View 5 Replies
View Related
Jan 17, 2010
I set up my linux router as a simple NAT router. I use CentOS 5.4. When I set up ISP proxy IP in the browser of client PC, Internet access is fast. When I remove ISP proxy IP from the browser, Internet access is slow.
ISP use transparent caching but I can use manual caching as well. Clients on my network with transparent caching get slow internet access and using ISP proxy get fast internet access.
ISP announce that we can use transparent caching or manual caching.
So, I set up my linux router with squid. I set up cache_peer TAG point to ISP's proxy IP. But the problem is the same. Using my squid proxy is slow and using ISP proxy directly is fast. All other network settings are correct.
How can I improve my internet connection using transparent caching. I don't want to set up proxy IP address on all clients.
View 5 Replies
View Related
Oct 27, 2010
I have Ubuntu running on my HTPC and for the longest time all this was working fine. Now all of the sudden my Internet connection is all sorts of slow. Chrome browser, transmission bt, apt-get, all have the same speed issue. I tried disabling IPv6, changing my DNS and installing all the latest updates. Nothing works.
View 1 Replies
View Related
Jan 3, 2011
I bought a new Laptop 2 week ago. It works well, but internet connection ist very slow. I use cable internet speed 25Mbit/s, normal with my old Laptop (Window xp) I can DL with speeds ca.1 Mbit/s but with this new ca. 15 kbit/s (same file). too much different!!! If anyone know, how to troubleshoot this problem, please tell me. And i get a advice that i should crate a new connection using the "workgroup" model instead. I've tried to do but failed. Who knows "how to" please explain it for me.
View 3 Replies
View Related
May 12, 2011
I've installed recently Ubuntu 11.04 and the first problem that I had was with my wireless lan card Wl-138g V2. The card was not enabled by the system, however after following one of Ubuntu's forum thread I managed to solve it, but... and there is always a but the internet speed is very low.When I had windows installed I faced the same problem and it was solved with an update in the driver, does any one experienced the same in Ubunutu? How did you solve it?
View 4 Replies
View Related
May 5, 2010
I'm running Kubuntu 10.4, and I'm having a really slow Internet connection, with Windows everything works fine.
When I upload a file to an internal Ubuntu server the speed is ok ~15MB/s.
The problem is only with Internet Firefox / synaptic, any program using Internet. Last download done with synaptic display 18KB/s when normally it should be 500.
View 9 Replies
View Related
Aug 5, 2011
I have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
View 5 Replies
View Related
Mar 31, 2010
I've just installed Ubuntu 9.10 in my laptop. Everything works fine except for my wireless. It works, but much, very much slower the through RJ45, which is perfectly ok. When using wireless i can't even connect to any online messaging service and I need to reload pages oftenly. My security setting is WEP 128 bits ASCII and since I'm trying to follow the format suggested on the thread "HOWTO post a Wireless issue" I'll try to provide the infos like requested on it. Laptop brand and model (I'm from Brasil, so it's a brasilian model)
Code:
Semp Toshiba IS 1412
Wireless Card
Code:
ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter
Interface
[code]....
View 9 Replies
View Related
Jan 26, 2010
I'm trying to get my wireless to work on my laptop (dell inspiron 1520 broadcom 4311). I installed the b43 firmware and was able to set up my wireless connection. However, the internet connection is extremely patchy and seems to continuously drop (in fact most of the time it doesn't work). I can ping certain sites such as Google and get all packets received.
[Code]....
Furthermore, in Firefox the opening websites only works some of the time. Sometimes the google search page will load and sometimes it won't. I've disabled ipv6 using yast-network settings.
View 5 Replies
View Related
Aug 15, 2010
i installed ubuntu 10.04 in inspiron n4010 laptop. No internet connection is detecting. i have both wifi and wired network. in the desktop panel icon of network it shows networking is disabled ..
View 9 Replies
View Related
May 29, 2011
I don't know if others are experiencing this but browsing is extremely slow in firefox after "upgrading" to ubuntu 11.04. I have not tried other browsers. Even checking for updates fails several times.
I had to re-boot to windows to post this thread and now it's working fine. It's been 3 days since upgrading and I've observed many times that there's no such problem in windows while I have to wait like 4-5 minutes and refresh many times to open a single page. Some sites like google are quicker though. I use firefox 4.0 both in ubuntu and windows. I didn't have this problem in 10.10 and it took me about 5 hrs. to download 1 GB upgrade packages.
View 2 Replies
View Related
Jun 12, 2011
I'm a newbie and try to switch from Win7 to Ubuntu 11.04 with unity desktop.
My internet connection is slower than hell, and I dont know how to fix it. I tried with disable Ipv6 but it doesnt make any difference. Not sure if its disabled proper because if i do code...
View 1 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
Feb 20, 2010
I am trying to install Fedora 12 on a 3 year old Dell Demension 1100. It only has a CD reader so I bought a 5 CD set and proceeded to install. Everything works fine until the end of the initial part of the installation where it asks to reboot the computer, the program says it has installed correctly. On rebooting the command line appears and asks for localhost log in. Problem is during the installation the program didn't ask for a user name only a root password. I am unable to access this and there are still another 4 CD's to go.
View 2 Replies
View Related
Jan 4, 2011
I have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
View 4 Replies
View Related
Aug 31, 2011
i have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
View 13 Replies
View Related
