Ubuntu Networking :: Easynote R1004 Wireless - Device Is Not Being Recognised

May 17, 2010

I am trying to get Ubuntu10.04 working on a packardbell easynote r1004 but the wireless device is not being recognised. I have ethernet working and have tried updating.It had found a hardware driver for a software modem..

View 1 Replies


ADVERTISEMENT

Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36

Nov 7, 2010

I'm using a Packard Bell Easynote Tn36 laptop, and I'm having trouble with Ubuntu 10.10 and the wireless network card, (probably because of lack of driver). I.e. it is disabled.

How can I enable it?

I input this code:

And here is the output:

View 9 Replies View Related

Ubuntu Networking :: Wireless Networking On Packard Bell Easynote Tn36 - 11.04

May 1, 2011

I have Packard Bell easynote tn36 and I used to use ubuntu 10.10 and then when I upgrad it to ubuntu 11.04 the wireless doesn't work (disable) and I can't press the botton of Enable wireless.

View 9 Replies View Related

Networking :: 3g Wireless Modem Not Recognised

Sep 27, 2010

I have a 3g data card(LW272 GSM/WCDMA USB Modem with HSPADataCard) which is a type of multi-mode, 3G modem or card, applicable to 2G/3G networks; but it doesn't get recognised in Ubuntu 9.10. Actually, this device came with a software(for linux too) which makes calls and sms possible simultaneously while surfing. But while installation(from root terminal) i see a repeated trials of connecting to modem but it does not find the device(something wrong in installation), and the interface of the software also shows "No(U) Sim". Anyhow it doesn't bother me much if i m not able to avail the additional services( call and sms), but what i need is to make the modem recognisable so that i could configure the connection.

View 3 Replies View Related

Ubuntu Networking :: Icon031 USB Mobile Wireless Isn't Recognised?

Nov 26, 2010

Here in India I've been given a USB dongle for my Airtel SIM that isn't recognised by Ubuntu. The dongle is an Icon031 EDGE, model: GI0031, serial number begins ME.usb-devices shows that the driver appears to be installed:Quote:

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0af0 ProdID=c031 Rev=01.00

[code]....

View 5 Replies View Related

Ubuntu Networking :: Wireless - Keyring Password Is Not Recognised

Dec 20, 2010

New to forum and quite new to any linux distro, have played around a little with older Ubuntus, having spare desktop I thought it was time to see how things are developing with the latest release. 10.10, downloaded and cd made.

Installed without a hitch, picked up all the hardware even my Edimax 712g nic. entered wireless network details and was off. Enjoying the new look and feel of the OS surfing, mailing and connecting to my win 7 laptop for my music shares. We then had visitors round so shut down, and went back to it this morning, only to find that a couple of things had changed.

(1) no matter what I do (Followed several different suggestions found on here) and no matter how many times I check all the details, It will not connect, to the router just carries on seemingly without end trying; only broken by the requests for the security key of the router.

(2) the keyring password is not recognised.

I thought I may have done something I didn't realise, so I simply did a reinstall, everything exactly the same, and just replicate the problem I perfromed a restart; ending up with exactly the same result.

View 2 Replies View Related

Ubuntu Networking :: Acer Aspire 4720Z Wireless Not Recognised

Apr 26, 2010

I just installed Ubuntu on my computer, and it will not display wireless.I researched other posts and found something to do to display info, perhaps someone will be able to tell me what is wrong?

View 9 Replies View Related

CentOS 5 :: Software RAID Device Not Recognised?

Aug 3, 2010

We ran out of space on our server hard drive, so I installed 2 x 1GB drives, set them up as a software RAID1 array, copied the contents of /home to it, mounted it as /home for testing. Everything OK, so I unmounted it,deleted the contents of the /home folders (don't worry, we're backed up), then remounted the array. Everything was fine until we rebooted.Now I can't access the array at all; during booting the error "mount: special device /dev/md1 does not exist" comes up twice, and manually trying toe same issue.The relevant line from fstab reads:/dev/md1 /home ext3 defaults 0 0.However, using webmin shows only md0, the RAID0 device on which the OSD was originally installed.There is no /dev/md1 device file.The mdadm.conf file reads as follows:

# mdadm.conf written out by anaconda
DEVICE partitions
MAILADDR root
ARRAY /dev/md0 level=raid0 num-devices=2 uuid=76fd4050:fb820568:c9bd3a59:ad3e70b0

View 1 Replies View Related

Ubuntu Networking :: Wired Connection On Packard Bell Easynote Not Working

Jan 17, 2010

My brother installed Ubuntu 9.10 on a Packard Bell Easynote NJ65. He has a wired home connection, which seems not to be working now. It was working with the same machine under Vista. What are the first places I should look? Any hints or clues or people with similar issues would be most welcome.

View 7 Replies View Related

Ubuntu :: Wireless Dongle - Plugged Into My Car PC - Not Recognised

Feb 27, 2011

I have 2 computers, both running Ubuntu 10.10. I purchased a TP-LINK Wireless Adaptor model number: TL-WN321G

On my main computer (Acer Laptop) I plugged the dongle into the usb port and Ubuntu picked it up straight away and connected, so it worked straight from the box.

I bought the dongle for my car PC, running Ubuntu 10.10. I then plugged the dongle into my car PC, but nothing, it was not recognised. Even though Ubuntu came bundled with the correct driver files found in /lib/firmware/zd1211 I manually updated them from the latest driver download, but still nothing.

How can I get my dongle to work ? I'm guessing I have missed something, because the dongle worked straight from the box on my laptop.

View 9 Replies View Related

Ubuntu Networking :: Wireless "device Not Ready" On Natty With Intel 1000 Wireless

Jul 7, 2011

I'm running Linux 11.04 and my wireless network was working just fine until today. I cannot connect to WiFi - it acts as if the device wasn't there. The hardware switch led isn't working. No matter how much clicking on it, it won't work.

iwconfig:

Quote:

lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm

[Code].....

View 3 Replies View Related

Ubuntu Networking :: Wireless Device Not Detected In 9.10?

Jan 9, 2010

I have freshly installed ubuntu 9.10 and moreover i am completely a newbie to Linux. The problem now i am facing is, i am not able to configure my wireless router. I tried finding drivers for it in System->administration->hardware drivers. But it showed me none. Then i checked out one of the threads in this forum and came across the 'lspci -nn' cmd. This gave me the info abt my wireless network controller and it was : 'Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)'.

View 1 Replies View Related

Ubuntu Networking :: Wireless Device Not Ready?

Sep 6, 2010

I've tried to install Linux systems have been failures. Trying to make this work, trying to get on the right wagon, and it's frustrating as all get-out.

Installed netbook remix onto a HP Mini 1000 (1116NR?) and everything seems to be working alright, except no wireless networking. I tried a couple of things and now it shows "device not ready" instead of "disabled", so I figure I'm getting somewhere.

The device is:

Broadcom Corporation BCM4312 802.11b/g (rev 01)

I want in. This is my 3rd try over the years of running Linux and I always hit snags like this that I can't fix because I've never gotten to play with it enough to learn what I'm doing and generally don't have a 2nd computer like I do right now.

View 1 Replies View Related

Ubuntu Networking :: 10.04 Can't Detect The Wireless Device?

Jun 24, 2011

My computer is Dell Inspiron N4020.And after I installed the Ubuntu 10.04 successfully,a problem occured:No wireless device appear nor the wireless signal

View 1 Replies View Related

Ubuntu Networking :: Cannot Use Internal Wireless Device

Jul 10, 2011

It's been ages since I've been on here I've been messing around with BackTrack. I've come back to Ubuntu but seem to be having some problems getting my wireless network thingy working. Here are the specs of my system. Any advice on fixing this would be very very apprciated.

02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 01)
10:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)

On another note I'm trying to run debain I've got no startx on there or anything like that it's feeling very basic atm. I want to keep startx outta there but I can't connect to the Internet and run apt-get install to grab handy things.

I'm hoping whatever I am gonna do to solve this on Ubuntu will let me connect up to my wireless network with the internal network thingy. However if it doesn't I'm guessin I can just connect up physically to the router. Any tips on doing this from the command line?

View 7 Replies View Related

Ubuntu Networking :: WEP Key Cannot Be Recognised?

Jun 2, 2011

I just installed the latest Ubuntu on my laptop. WEP key is not accepted when connecting to wireless even I using the correct key. When I closed the WEP, I able to connect to the Internet. I had search for a long time. Seems like linux always has this kind of problems. WEP key is not recognised due to ASCII or Hex key? How I choose to insert the ASCII or Hex?

View 1 Replies View Related

Ubuntu Networking :: Wireless Internet 'Device Not Ready'

Jan 27, 2010

I just recently installed ubuntu, my first experience with linux. I don't know if it isn't recognizing my wireless card or if it is another issue, but I am unable to view any wireless networks/connect to any. When I click on the network icon it says "wireless" with Device Not Ready underneath.

View 9 Replies View Related

Ubuntu Networking :: 9.10 Aspireone Wireless Device Not Managed?

Feb 28, 2010

Seems everytime I upgrade wireless quites working.

Anyways, here's the info:-Acer Aspire One AOA150-1997

Quote:

kevin@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

[Code]...

I think that's all that would be needed to help diagnose the issue. I'm kinda new to linux, and this is primarily a music machine.

View 6 Replies View Related

Ubuntu Networking :: Sabrent 802.11-N USB 2.0 - Setting Up Wireless Device

May 28, 2010

I've been using Ubuntu for a while, but I have never tried to set up a wireless device with it. I have no idea where to even begin. I've done a search of the forums but wasn't able to glean much from it.

View 9 Replies View Related

Ubuntu Networking :: Wireless Device Missing After UNR Update?

Sep 21, 2010

I am running UNR on an Asus T91MT and everything was working great until an update yesterday, my OS froze while updating and I had to do a hard reboot. Since, I have not been able to get wireless, and lshw does not even recognize the presence of a wireless device on the system.

View 1 Replies View Related

Ubuntu Networking :: Disable An On-board Wireless Device?

Nov 15, 2010

I recently bought a new nettop and installed Ubuntu 10.10 Desktop. Unfortunately the on-board wlan is kind of crap so I bought a USB Wireless stick and since that stick has a pretty recent chipset ndis was needed to get the USB stick to work as wlan1.

The issue is I want to disable the on-board wlan (wlan0). The BIOS does not offer that option so it needs to be done in the OS I guess. My question is what is the best way of doing so? I've read something about blacklisting or editing 10-wlan.rules but I am unsure what the best place is and what to put there.

This the output of ifconfig:

Quote:

eth0 Link encap:Ethernet HWaddr 00:01:2e:2b:a7:b0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0

[code]....

View 2 Replies View Related

Ubuntu Networking :: Can Disable A Specific Wireless Device

May 17, 2011

11.04 64 bit I just picked up a new high-gain usb wireless adapter that I would like to use for a while in place of the built in wireless adapter in my desktop. It is detected and works just fine. My question is this: Is there any way I can disable just the built in adapter and leave the new one active (or visa versa?) I don't want to remove the built-in one as there will be occasions that I will want to use both.

View 6 Replies View Related

Ubuntu Networking :: Wireless Device Not Working After Standby / Solve This?

Feb 20, 2010

I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.

View 1 Replies View Related

Ubuntu Networking :: 10.04 Wireless Connection - Turned Off Or 'device Not Ready'

May 16, 2010

I just installed Ubuntu 10.04 and I can't seem to get the wireless connection to function. Ubuntu either says that the card is turned off or if I toggle the wireless switch on my keyboard it then says 'device not ready.' I'm using a Dell Wireless 1397 WLAN Mini-Card, and it works fine when I boot in Windows 7.

View 8 Replies View Related

Ubuntu Networking :: Linksys WUSB54G - Hook Up Through Wireless With Device

Dec 14, 2010

I have a Linksys Wireless-G USB Network Adapter, 2.4 GHz, 802.11g. It hooks up through USB plug, and when I originally plugged it in I got the message that ubuntu didn't support the drivers, but haven't seen it since. I'm hooked up to a LAN cable right now, and can't seem to figure out how to hook up through wireless with this device. Or I just don't know how. When I click on the network connections button on the top right corner (the two computers). I can see my Wired Internet, but no wireless. When I type lsusb in a terminal I get : (sorry I don't know how to do code blocks) So it is recognizing that it's there, but maybe I just don't know how to use it. Also, I'm running Ubuntu Release 10.04 (lucid).

View 1 Replies View Related

Ubuntu Networking :: WG511 Wireless Card Not Available As Network Device

Feb 22, 2011

I have just installed Ubuntu 10.10 on a Dell Laptop. It has a Netgear WG511 (made in China) PCI wireless card but I cannot see any connections other than the wired one. Entering in lspci in the terminal mode and removing/replacing the WG511 shows (I think) that something is being detected in the PCI slot "Network Controller: Intersil Corporation ISL 3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] rev 01". Is this the WG511 and, if so, how do I get it to be detected as a network device?

View 9 Replies View Related

Ubuntu Networking :: 10.10 On Lenovo L420 - Wireless Device Not Detected

Jul 17, 2011

I have purchase one Lenovo L420. It has Windows 7 installed. I have installed Ubuntu 10.10 also (dual boot). The wireless is not working in Ubuntu but working in Windows 7. I think that the wireless device is not detected in Ubuntu.

View 9 Replies View Related

Ubuntu Networking :: Wireless - Device Not Ready - Firmware Missing

Jul 23, 2011

I thought I'd give Ubuntu 11.04 (Natty Narwhal??) a try on an old Dell Latitude D600 I had lying around. Install went great. Everything seems to run nice and slick.. except one thing.. the wireless is giving me the old "Device not ready (firmware missing)" So I can only use my lappy on a leash.

It's a pretty common Broadcom NIC... and I've tried running the System / Administration / Additional Drivers and nothing comes up.

It seems to me I need a driver someplace...I don't know where or how to get it installed.

View 9 Replies View Related

Ubuntu Networking :: Error While Creating Wireless Network - Set Failed On Device?

Jan 16, 2010

I have been working on this for a while now and am absolutely stumped. Basically, what i am attempting to do is make my ubuntu box into a gateway for my network. I have everything working thru hard wire, but I simply cant get the wireless to work. No matter what I do, I cannot get my wireless card to transmit an essid and allow nodes to connect. I have tried assigning it in the interfaces file (shown below), and I have also tried manually modifying it using the iwconfig command. Here is the topology:

eth1: internet WAN
eth2: ethernet out to LAN
ra0: wireless out to LAN
Here is a copy of my /etc/network/interfaces file:
[CODE]
auto lo

[Code]...

View 2 Replies View Related

Ubuntu Networking :: Usb Wireless Device Not Shown Under Sudo Lshw -c Network?

Feb 5, 2010

Okay currently I am using a a Belkin F6D4050v1 usb wireless n card on a 32 bit intall of ubuntu 9.10. I have already installed ndiswrapper and installed the the rt2870.inf driver and rebooted. But i still have no wireless. when I use the command "sudo lshw -C network" all i see is my pci wired nic card"lsusb" the ID of the card is "050d:935a Belkin Components""sudo iwconfig" sayslo no wireless extensionsetho no wireless extensions

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved