Dell Inspiron 640m laptop, running 10.04. It previously connected via wifi & now fails to connect, although the wireless indicator shows a connection. Connection via ethernet works. Below there's some information that looked like might it be useful to diagnose the problem based on other posts in this forum.
[Code]....
I have a Dell Inspiron 1545 with a Dell Wireless 1397 WLAN Mini-Card and a Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller, and I cannot for the life of me get the internet to connect. I've tried both wired and wireless connection. I have a PPoE connection through a Verizon FIOS Actiontek router I believe, though the PPoE part may be wrong, I had one five years ago when I first got their internet so they may have changed it. Point is that the ethernet and internet won't work, and without a working ethernet I can't fetch the right drivers for anything.
I had also tried plain ubuntu 10.04 and couldn't get them to work then either. It said 'disconnected' at first, and then said 'device not ready' There is no hardware switch but there is a key toggle. It doesn't seem to matter what state the wireless was in before booting into Ubuntu Studio, so I'm lost as to where to even start. Even though the network manager isn't there like in regular ubuntu, I assume there will be a simple way to connect to the internet once the drivers are found, right?
I've seen issues and read about fixing them, but usually it uses an ethernet connection to fix the wifi connection and, being new to linux (<50 hours worth of experience lifetime), all I managed to do trying to fix it myself was screw up the installation to the point where the laptop couldn't access the home folder and I had to reinstall. Other than that, I am usually very good at following instructions, as long as they apply to my laptop's issue I guess
The only other issue is minor, I can't seem to control the USB mouse I have, but the trackpad works fine so it's no big deal, probably a matter of downloading the mouse driver once the internet works.
Currently I do have internet access via the same laptop while booting Windows 7 (I installed Ubuntu Studio 10.04 on a 10GB Partition with the idea of using an external HD for most data storage).
Oh and it is a 64-bit machine, the Studio version I installed is 32-bit.
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
View 6 Replies View RelatedI have Dell Inspiron 1545. It works fine on wired but fails on wireless.
I am using wicd as an interface.
It always comes up with the following error: Connection Failed: Bad password.
I have checked the passwords in both wicd and the router.
They seem to be the same. Am I missing something ?
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
View 3 Replies View Relatedi have a dell inspiron 1764 windows 7. it will connect wirelessly fine on windows 7 side but when i boot to ubuntu cant detect network or anything. what do i need to do.
View 3 Replies View RelatedI have an Inspiron 1300 and have followed the "B43" instructions here:URl...Plus various other guides including the "one click b43 fix" but nothing useful happens. Wired access doesn't work either.
View 4 Replies View Relatedi have a dell inspiron 15r that i plan on running fedora on, however, today i booted fedora from a live cd and it was completely oblivious to the fact that i have a wireless card, obviously i need certain drivers for it, problem is i dont know what drivers those would be, or where to get them, http://www.dell.com/us/business/p/inspiron-15r/pd this is my laptop model, and it says i have a "Standard Dell Wireless 1501 802.11 g/n" wireless card, if anyone could tell me how to get this working,
View 13 Replies View RelatedThe network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies View RelatedI'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies View RelatedMy dell inspiron 1150 internal wireless won't work and ive tried ndiswrapper. link to an open source driver?
My ubuntu distro is 9.10 (soon to be 10.04 as soon as i get the video drivers )
dell inspiron 1150
ubuntu 9.10/10.04
512 mb ram
40 gb hd
intel centrino cpu 2.80 ghz
I am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies View RelatedI've got a Dell Inspiron 1545 with wireless card Dell wireless 1397 802.11g. It was working fine with Windows and Ubuntu 9.04 (I've got the two OS installed alongside). But as soon as I upgraded my Ubuntu to version 10.4 I realised it lost its wireless connection! I updated the system, the hardware driver for Broadcom STA wireless driver is activated and in use (according to Ubuntu Hardware drivers checker) but the fact is that I can only connect on the Internet if I hook the net cable on it, when I run the mouse over internet connection icon at the topright side of the monitor I see "no network" message and when I left click on it the option "wireless network" it's disabled and gray. How can I get my wireless card back working?
View 1 Replies View RelatedI've installed Ubuntu 9.10 on my Dell Inspiron 1440 laptop. How can I install the necessary wifi drivers for my machine.
View 2 Replies View Relatedi have to say that i'm not too familiar with Ubuntu... or Linux in general . I've installed it once, just to test it out but I didn't know how to use it so i just reinstalled windows. The other night, i was bored and decided i wanted to re-try Ubuntu and to my suprise, i found Wubi. I love ubuntu now and i made the decision to permanently switch over to ubuntu.
At first, my wireless wasn't working, but there was a quick fix. All i had to do was go to the Synaptic Package Manager, Reload, and search for "Broadcom." I installed the Broadcom STA Wireless driver and i was online within a couple of minutes. I then played around for a couple of hours before turning my laptop off. But, this morning, when i turned it back on...I coudlnt' connect. When i click the little connection icon in the top right, i see the message "Wireless is disabled".
There is a key on my computer that turns the wireless card on or off, and i have tried it. It doesn't work. I have reinstalled the broadcom driver and it doesn't work. I've rebooted...And it doesn't work. I don't know enough about linux to get a solution and every other solution i find on the internet doesn't work.
I have seen in other threads that you guys usually ask for a a couple of things from the user. ifconfig and the sudo lshw -C network so i have included them below. I also looked into the ubuntu help documentation and it told me to do the lspci command.
ifconfig
Code:
eth0 Link encap:Ethernet HWaddr a4:ba:db:d1:61:c2
inet addr:192.168.1.68 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a6ba:dbff:fed1:61c2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
I have spent all day trying to wireless network to work on my Dell Inspiron 1440, but no luck.
I followed the guide here: [URL]
Here are the details of my network card:
root@bruparel-Inspiron-1440:/home/bruparel# lspci -n | grep 14e4
0c:00.0 0280: 14e4:4315 (rev 01)
Here are the more verbose details:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
[Code]....
Things seem to install fine, but the wireless network remains unavailable (wireless network is disabled).
If someone can walk me through the trouble-shooting process, I tried the solution suggested in the sticky at the top too but no luck.
I'm running on 11.04 on my Dell Inspiron 1764, and so far haven't been able to achieve internet access through either a direct wired connection or wireless.
Wireless network controller: Broadcom BCM4312 802.11b/g LP-PHY (rev 01)
Ethernet controller: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Fixes I've tried so far:
Wired - Attempted to install the r8168 driver and remove the r8169 driver as is done in this thread:
url
Wireless - managed a fleeting wired connection yesterday, during which time I installed the Broadcom STA driver through Additional Drivers.
Also attempted to install the firmware-b43-lpphy-installer, following these instructions:
url
but to no avail (under Synaptic Package Manager, the firmware-b43-lpphy-installer still remains unchecked after I install it through terminal)
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running
rfkill list all
shows dell-wifi hard blocked no soft blocked no.
The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
I'm having problems connecting to a wireless network on my Dell inspiron 1520. i can't seem to enable wireless roaming on ubuntu and i get various error messages when i try.
When i run iwconfig, i get:
running iwlistscan gives me:
When i right click the network manager, there is no "enable wireless" option. I know that wireless works since i used it last night on windows, and the radio is turned on.
I tried to find my solution for hours now but no luck. I'm a medical student and the other day I finally found the time to set up ubuntu for my first time. Everything was working great and I had wireless up and running. However, I tried to set up tethering to my iphone and after that my wireless hasn't been working (I've noticed no other problems). [URL]..Then I used this tutorial [URL].. However, after doing these steps the computer needed to reboot (I actually forget exactly where but I had to reboot in the middle of the second tutorial). After my computer restarted my wireless no longer showed up. By this I mean that wireless network no longer even showed up as an option when I left clicked then connections. However, I did not lose the wireless profile under network connections. So I went to system and noticed that the Broadcom STA driver was no longer active. So I tried to activate again and received this message.
[Code]...
I recently installed Ubuntu Netbook Remix on my Dell Inspiron Mini 10, and for some reason it isn't detecting any wireless networks. The wireless works perfectly fine when I boot to Windows XP on the netbook, but not when I'm using Ubuntu. I tried troubleshooting using this htmlAt the "check for device recognition" step, the terminal tells me that it's disabled, but as far as I can tell there isn't a physical switch that allows me to turn the wireless on or off, and again, it works perfectly fine when I use XP. What should I do?
View 9 Replies View RelatedI just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
I have install 64bit version of Fedora 12 on a new Dell Inspiron 1545 with a Dell 1397 wireless card. It actually uses a Broadcom BCM4312 chip.
I have install the following rpms:
Code:
broadcom-wl-5.10.91.9.3-1.fc12.noarch
kmod-wl-2.6.31.9-174.fc12.x86_64-5.10.91.9.3-3.fc12.11.x86_64
kmod-wl-5.10.91.9.3-3.fc12.11.x86_64
code....
what I do not understand is the state of the card as unavailable. how I can activate this card?
I've got a wireless problem on my laptop (dell inspiron 6400).I don't know when exactly and why, but every time I watch a video on ..... or allostreaming, after a while (a few minutes), my wireless disconnect and it's impossible to get back any connexion. The only solution I have is to reboot my computer.
the command : iwconfig shows :
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:"Callalc"
code....
Dec 18 18:33:18 yannick-laptop wpa_supplicant[1390]: Failed to initiate AP scan.
Dell Studio 1735 w/BCM4312 WEP fails to connect even though I'm using the 10 character HEX key. It connects fine when there's no security on my Linksys WRT310N router. Ubuntu, Windows 7, my Samsung TV and TiVo all connect fine with the 10 character HEX key, but with opensuse 11.4 I can't connect.
Code:
lspci -nnk tells me I've got:
0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Kernel driver in use: wl
[Code]...
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
[Code]...
I just completed installing openSuse 11.1 I followed the detailed steps given in Getting Your Wireless to Work When I try to scan for available APs in the vicinity, I get the following error.
~> sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
Can someone guide me in configuring my wireless connection. Also, since I do not happen to have a wired connection, I am alternating between openSuse and windows everytime i need internet.