The netbook wired internet was working fine UNTIL I reset the internet modem! and then it no longer was able to connect to the internet.
I read several threads and did sudo lshw -C network
It said network disabled
ethernet interface
Atheros AR8132 lic gigabit ethernet adapter
physical id 0
bus info pci@0000 :02:00.0
sonia@sonia-laptop:~$ sudo lshw -C network
[sudo] password for sonia:
*-network
[Code]....
Code...
I've got a new HP Compaq Mini 110c-1110SD.
I've booted Ubuntu UNR 10.04 Beta2 from a USB stick and at first it seemed like everything worked so I installed it (dual boot with the installed Win XP which works fine, no network problems)
But .. I forgot to check if internet worked. Since I don't have a wireless, I plugged in a cable and the Auto eth0 showed up as connected.
Looks good, but I can't get internet to work. Local browsing on my LAN works ok, but getting on the internet doesn't work neither does apt-get so updating is a problem too.
Strangely enough, ping does work ...
I thought it had to do with UNR being a beta, so I've booted from a live UNR 9.10 usb stick, but same problem, no wired internet.
I'm totally stumped. I've been running Ubuntu since 2007 on several PC's and never had any problems with networking.
So, how do I fix this ?
I'm new to Fedora, I used to have Ubuntu 10 and found that some software I required would not work properly so I decided to Fedora under recommendation from a friend. I really like it but when I installed Fedora 13 on my Netbook I found it difficult to set up my wireless connection.
View 6 Replies View RelatedInstalled 9.10 (not the remix version) on my netbook but can't seam to get the wireless working; followed a few threads on the net, but to no avail.
View 2 Replies View RelatedI have a compaq mini 110-1000 with integrated 3g modem and natty narwhal. I bought a vodafone data sim card, I've configured the network manager but it doesn't work! All solution I found are possible only with the hp connection manager. but I've removed windows!!
This is what I see with "lsusb"
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 0461:4d6a Primax Electronics, Ltd
Bus 002 Device 004: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 002 Device 003: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 002 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 10f1:1a0f Importek
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I just installer Ubuntu 10.04 Netbook Remix on my Compaq Mini 700EL, the ubuntu website says that everything works very well including the wireless. But for some reason the list of connection doesn't appear at all. It just says "device not ready" This is driving me a little nuts. It appears that the Broadcom drivers are installed. I typed lspci on the terminal and it says that the computer loads a Broadcom Corporation BCM4312 802.11b/g (rev 01)
I also downloaded the drivers even though they should be already in it. But I'm not sure.
I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
View 2 Replies View Relatedmy ubuntu can not detect my wired and wireless mini netbook is HP 100e and impressive is that in any way I can be connected
View 1 Replies View Relatedi dosent get the wired network in my HP mini 2140 to work. It had worked before but today it stoped. I think it's the network card that is the problem. im running fedora 15.
View 4 Replies View RelatedI install ubuntu in a compaq mini CQ10 and it worked very well, found no problems with the hardware, then I start to download more than 200 mb of updates from the update manager, after the reboot, a black screen appears with a underscore in the top and ubuntu doesn't start.
View 2 Replies View RelatedI have got a lap top (Compaq Mini 311), I tried to install Ubuntu 10.04, but after installing it I found only a black screen with a blinking whithe bar, and the keyboard does not work anymore.Looking across the net, I found this page , where is written that I have to install the previous version, do some operation and then upgrade it. Well, also with Ubuntu 9.10 and Ubuntu 9.04 I have got the same problem: total freezeing of the computer after the installation.
So, I tried to install ubuntu with wubi, as a virtual machine, but the problem is exactly the same.Somethimes, it may happen that Ubuntu loads, but it happens about in 1/50 cases.I installed it many times, everytime erasing the partition, but actually I have a boot menu with about 6 or 7 linux (not working), and windows, loading windows I can choose between win and ubuntu, if I choose ubuntu, I have 5 options: 4 are not-working-linux, and one of them is windows. If I choose windows, I come back to the previous menu: a loop on grub was done, but I don't know how.
I'm trying to install Ubuntu on my Mini 700 EL and when I start it doesn't give me the option to install it alongside Windows. Wubi does not give me the option to install onto the system, only to reboot and install it completely. When I try to install from booting from the USB key, I decide to edit partitions manually and I don't get the option of resizing the Windows partition, I can only delete it.
View 2 Replies View RelatedI loaded Ubuntu 10.04 on my Compaq Evo N800c as a single operating system. I cannot get my wireless connection to work which is the Compaq w200. I tried connecting the internet through a wired connection and the computer shows it tries to connect and does for all of 3-5 seconds. I then get a internet disconnected message at the top of the screen.
View 9 Replies View RelatedI am brand new to linux and i am finding it really frustrating cause i always thought i had quite a knack for computers. ive looked online and searched a bunch of stuff but because im so new to linux i am having a hard time even understand some of the stuff. i really want to get comfortable/fluent with linux and unix and what not.
My netbook model is HP Compaq Mini 110 the distribution i am using is Linux Mint 10
My broadcom wifi device isnt working or something.
When i first installed mint, it said that i needed non-free drivers?
The ethernet cable instantly gave me connection and i was able to run updates but the wifi still doesnt work i think the updates only updated the free ones and not the non-free ones cause i dont remember ever specifying to download the non free ones how do i manually specify to download all available updates?
I also typed:
The output says:
Also when i right click on the little network sign on the bottom right corner, then it says "Wireless Networks device not read (firmware missing)"
I face in getting my wireless connection work. I am able to establish connection with my router and browse router configuration pages successfully. However, trying to access any other internet address (through browser or ping etc) results in intolerable poor performance (70% to 100% packet loss in ping). Ethernet connection (eth0) works perfectly though. Am furnishing the details below:
Netbook: HP Mini 311
Product No: VM257UA#ABA
Model No:311-1000NR
Ubuntu Netbook Remix:
[Code]...
I installed the netbook version of ubuntu 10. Problem is no wireless networks show up. So I have an eternet connecting. Only problem is when I plug that in, still no internet. I need to download drivers to make the wireless work.
View 1 Replies View RelatedI installed Fedora 12 on my Compaq Presario c700 Notebook recently and had a great install. I installed ndiswrapper and installed the inf file for my broadcom 4311 driver through ndiswrapper as well. The installation of the driver appeared to go smoothly.
The only thing is that I still cannot connect to the internet. I aliased the driver as well to wlan0. I can not figure out what is currently the problem. I tried reinstalling the driver and I keep receive a message stating the driver is already installed.
Long term Fedora user, I have recently decided to set up a small shuttle computer as a media centre (using mythTV), data store/NAS (so all my data is centralized), mini web server, etc. After installing I had the fun of trying to get my audio working correctly (which I did eventually .. after finding out I unplugged the audio after the second reboot and solved it after somewhere). After this, I got internet video searching working through mythTV using adobe Flash. I then went to bed only to find the internet not working (can't telnet, can't traceroute, can't anything). This is both as the mythtv user I have set up and as root.
The setup I have is:
PC -> router -> interweb
192.168.1.7 -> 192.168.1.1 -> interweb
I also have a laptop (F12) which is on 192.168.1.5.
The laptop has access to the internet just fine (no problem at router / interweb).
I have the only access to the router and disabled any ISP access (no changes in router).
I have the only access to the PC (no changes in PC).
I have set SElinux to permissive (no selinux issues).
I have temporarily disabled iptables on the PC (not firewall issue).
So, I decided to look at the differences between my two machines on the network. Initially the PC was missing the route:
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
I changed the services on startup so thet 'NetworkManager' was off, but 'network' started (exactly like my laptop). I turned off avahi-daemon, and any other network sort of daemon which doesn't match my laptop (which I have also customized).
I then set my eth0 config file to this:
Code:
# nVidia Corporation MCP77 Ethernet
DEVICE=eth0
HWADDR=00:30:1B:47:C4:FF
ONBOOT=yes
BOOTPROTO=none
TYPE=Ethernet
DNS1=192.168.1.1
USERCTL=yes
IPV6INIT=no
# DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
# NAME="System eth0"
# UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
IPADDR=192.168.1.7
NETMASK=255.255.255.0
NM_CONTROLLED=yes
GATEWAY=192.168.1.1
MTU=1432
# PREFIX=24
Commented out any lines which I didn't recognize. So, right now netstat -rn returns:
Code:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
/etc/sysconfig/network:
Code:
NETWORKING=yes
HOSTNAME=sophie
And to me everything looks OK.
I even have inter-communication working fine (I can SSH between the two servers no problems - 192.168.1.7 <-> 192.168.1.5). I can do DNS queries from both just fine (nslookup google.com returns fine). I just can't get any information back from the net. Would it be work me doing a tcpdump or wireshark dump etc ('tcpdump > file' would be easier for me)?
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
I just got a new power supply in my old desktop, and installed ubuntu on it. I've got three NICs in there (for a later project), and when I connect my cable modem to any one of the NICs, then little connection triangle-spinny-thing in the upper-right tries to connect. But it never gets all the way connected.
View 5 Replies View RelatedI have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
I recently did a fresh install of 10.04 from 9.04 and since then I am unable to use Internet. However my ethernet connection is working fine, as I am able to login to modem and check configuration. I reinstalled twice, downloaded fresh 64-bit & 32-bit and also followed kernel update steps as in few forum posts, but no joy. The firefox is throwing an error "The connection has timed out". My internet connection is working fine as I am able to use my Windows Laptop to post this message. I checked system > administration > hardware drivers and couldn't find any unsupported hardwares.I had similar issue when upgrading to 9.10, hence stayed on 9.04. When I looked at LTS image, I couldn't resist and cleaned up 9.04.
View 5 Replies View RelatedWhen I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies View RelatedI have been using lucid ubuntu 64 bit on this pc for months with no problem till yesterday. I noticed yesterday that eth0 was no longer being set up on boot and so internet is not there now. I am currently on the internet using karmic ubuntu.
I'm thinking an update with aptitude? What can I do in lucid to get my networking working? I tried booting into recovery mode and repairing packages but my pc could not get on the net to check the packages.
I just installed Ubuntu 10.10 tonight on my Acer Aspire One D250 and have no internet at all. I know both the wireless and wired internet work, as I am dual booting WinXP as well.
View 3 Replies View RelatedI am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
I no longer have a Auto eth0 connection. I am running 10.04 and have not done any major changes. Here is my ifconfig -a:
Link encap:Ethernet HWaddr 00:1a:a0:97:65:a9
BROADCAST MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]....
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies View RelatedI installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies View Related