Ubuntu Networking :: Bluetooth Inconsistent After 10.10 Upgrade
Oct 11, 2010
So, after the upgrade to 10.10, my bluetooth devices keep cutting in and out, and my Jabra bt125 won't connect to this computer. The Jabra won't even show up on btscanner or bluewho, but it will connect to my phone. The phone connects, but quickly disconnects. When left alone, the two will connect again! A friend's other headset connected, but had the same problems as the phone. That was an LG HBM-210. The signal was good for up to a minute, then down for at least a minute, over and over. Before the upgrade everything worked perfectly. What happened, or what did I forget to do? Might I have removed something critical when I switched Maverick 64-bit to the lubuntu package, and tried to remove some redundancies?
View 1 Replies
ADVERTISEMENT
Jun 4, 2011
I installed Ubuntu two ways, both by partitioning the hard drive and installing Ubuntu in its own partition, and also where the "run within Windows" option was available. I then upgraded both to Ubuntu 11.04. When I start Ubuntu in the "own partition" installation, Unity runs without complaint. When I start Ubuntu in the "run within Windows" installation, Unity baulks, giving an error message that I don't have some (unspecified) of the hardware it needs to run, and I am kicked back to the classic Ubuntu control screen setup. Obviously the two ways to install Ubuntu don't result in it having the same behavior. Alternately, since the version installed to "run within Windows" seems to do no such thing, and also gobbled up almost all the free space in my Windows-7 partition without prior warning, any clue how to uninstall that version cleanly?
View 1 Replies
View Related
Nov 20, 2010
I can't boot the 2.6.35-22 kernel, since I get the "Error 16: Inconsistent filesystem structure" every time. However, the previous kernel I have installed, 2.6.32-25, is booting without a problem, so I'm forced to use that until this problem is solved. What can I do?
View 2 Replies
View Related
Jul 18, 2011
Currently I have a HP G62 Laptop and it's been great but recently I've started getting really inconsistent wireless access. When I boot up the computer - it will connect to the wireless and work for awhile but 10-15 minutes later, websites stop loading entirely so I have to restart to get it to reconnect. If I don't restart and disconnect/reconnect... it doesn't do anything, it shows it trying to connect and then a weird "hiccup" happens and it tries again until it finally decides that it cannot connect. I'm running the latest version of Ubuntu I believe.
View 1 Replies
View Related
Jun 25, 2010
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code:
Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?
I tried on console
Code:
$rfcomm listen 0
but it's stuck at
Code:
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
View 1 Replies
View Related
Apr 24, 2010
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
View 1 Replies
View Related
Nov 2, 2010
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code:
Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....
View 2 Replies
View Related
Nov 29, 2010
Like so many others, after upgrading 8.04->10.04 LTS, Bluetooth is now busted. I've spent the better part of a day trying to find answers; I've tried many things and the results have not been consistent. I'm not going to write a book here as there are many other posts on the same problem and no real answers other than to complete a fresh install. I CAN do that but I'll have to overcome one bothersome problem:
Bluetooth is an important protocol. Now my (Bluetooth) broadband adapter is busted and I have to try and resolve this issue using a lousy phone line and modem. Needless to say... I can't download a new distro with that configuration. The updates would take weeks!
I suppose I'll have to drive into town and get someone to burn me a copy of 10.04 lts... Hope that works!
I'll think twice (or more) before upgrading an LTS distro again! That machine was working great....I don't know why I upgraded.. security concerns mainly. live and learn I guess... live and learn.
View 1 Replies
View Related
Jul 7, 2010
I am running Ubuntu 10.04 64 bit desktop edition (on intel core 2 quad 8200, intel dg41ty motherboard, 2gb ram). My problem is that i installed screenlet and drapes wallpaper changer but every time i start my computer the drapes application failed to load and some of the screenlets also not start. In the panels the icons automatically changes their position and sometimes. i don't know what is the problem. Please help me because it is very annoying for me every time i start some screenlets manually and click on the drapes error.
View 1 Replies
View Related
Jan 28, 2010
When I setup Intrepid (upgraded to Jaunty now), I chose to create a swap partition. I don't remember the size I specified. Here's what I'm confused about When I do 'cat /proc/meminfo' or 'free' or use the system monitor, it reports my swap size as 1262304 KB (i.e. 1.2GB). But if I do a 'fdisk -l', the partition size is reported as 746991 blocks (of 1024 bytes) and if I use the partition editor it says it's 729.48MB. XP disk mgmt shows it as app. 700MB too
View 9 Replies
View Related
Sep 17, 2010
able to find anything on this particular issue. The problem I'm having is that the contrast ratio of text in firefox seems very inconsistent. For example: if I'm reading an article on NYtimes, from one paragraph to the next it looks like some sentences are in bold-face and others are not. If I refresh the page, it'll be different areas that are or aren't bf. Sometimes they even change (getting darker or lighter) as I'm sitting there reading. I tried to take a screenshot but unfortunately the text all becomes uniform as soon as I hit prt-scr so the image doesn't show the effect.
Another example is viewing my personal favorite forum where threads that I haven't read are in bf as opposed to those I have read which are normal. The problem is that when I do a mouse-over of the bf threads the font rendering becomes more greyed out. It's still bold-face, just not as dark.
A final example is in text-entry boxes. As I'm typing this right now the line I'm on looks normal but the paragraph above seems to go from regular to bold-face from one line to the next. The paragraph above that looks entirely bold-face...
It did occur to me that this could be a monitor issue or even a vid-card issue. But it's definitely not monitor because I can scroll the whole screen and the variation moves with the text... And it's not vid-card because I installed Chrome as a check and it doesn't have the same problem. None of the above symptoms carry over to that application.
View 9 Replies
View Related
Jun 15, 2011
I recently upgraded from 10.10 to 11.04. I'm on a Dell XPS Studio 1640 and have Ubuntu installed in Virtual Box.A lot of the time when I log in the main menu goes to an old grey theme and windows are the same when opened. I think the Gnome theme is not been loaded correctly?Sometimes it is fine and has the nice default Ubuntu-Default-Dark icons.
View 2 Replies
View Related
Sep 12, 2010
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
View 1 Replies
View Related
Nov 4, 2010
My HDD shows:
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 416G 379G 16G 97% /media/Media
sda5 is formated as ext4 - Any thoughts why the numbers do not add up? 416-379 is not 16. I seem to be missing some free space.
View 4 Replies
View Related
May 16, 2010
I am trying to read the info for Groff using KDE Help Center. The paragraphs take turns in using monospace and sans-serif. There is no apparent logic behind this variability. Additionally, several lists are misplaced (not indented).
View 9 Replies
View Related
Mar 21, 2009
ive installed it before but that was with help and i want to dualboot it on my laptop with windows when i get to partitioning setup it tries to delete my windows partition and says "cannot resize due to inconsistent fs." for my windows c drive and recovery drive i dont want to delete it becouse i have data on it.
View 9 Replies
View Related
Jul 5, 2010
i have 2 iso files. the first i downloaded from net, the second was created by me. Both files have the same files. the only difference is the content in one of the files.In other words:1. i downloaded the 1.iso2. mounted, cp -pr ./ ; vi ./<one of the file3. mkisofs -o 2.iso.
Code:
mkisofs -o 2.iso ./iso/
<skip>
[code]....
View 6 Replies
View Related
Aug 7, 2010
I just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.
View 14 Replies
View Related
Apr 17, 2010
I have a 10GB IDE disk that Parted says has a single 10GB partition (/dev/sdb1) which is mounted at /home. However, df and the Gnome file managers see it only as a 3GB partition. It was a 3GB partition when I was using Fedora 9 but the partition was resized to 10GB during the installation of Fedora 11.Can anyone suggest how to make df and Gnome see it as a 10GB partition?
View 3 Replies
View Related
Sep 5, 2011
I have a script that sends short reports via the mailx command which is failing a lot lately.
Syntax used is basically: mailx -s "the subject" -r somebody@somewhere.com myemail@gmail.com < textfile.txt
For what ever reason this command has become very unreliable lately. I've tested on the command line and sometimes it works but frequently fails. The -r address seems to cause problems as it always fails with a -r set to my work address. I've read several theads and tried adding a .mailrc file but couldn't get past the NSS configuration setting. (Using my mozilla x123x.default dir results in Error initializing NSS: Security library: bad database. )
The nail command behaves about the same. what would make email sending so intermittent?
I've checked the /var/log/maillog but see each mail session end with the following and no errors reported:
View 3 Replies
View Related
Feb 2, 2010
Code:
#suse's /etc/fstab
/dev/sdb1 /windows/FAT vfat users,uid=1000,gid=100,rw,utf8=true
[code]....
View 11 Replies
View Related
Jan 8, 2010
My wireless card works most of the time, however with prolonged usage results in a temporary halt in functionality. I am not sure how to go about diagnosing or solving the problem, and I do not know what information I should be providing.
View 5 Replies
View Related
Aug 13, 2009
Error 16: Inconsistent filesystem structure I was making my first system update yesterday, and had to restart after 6 hours of downloading, while the indication bar was about 60%.
Today, I was booting into Centos 5.1 and GRUB gave me this screen:
root (hd0.0)
Filesystem type is ext2fs, partition type is 0x83
kernel /vmlinuz-2.6 18-53.e15 ro root=/dev/VolGroup00/LogVol00 rhgb quite crash
kernel=128M@16M
[Code]...
View 3 Replies
View Related
Jun 21, 2011
I have two computers, a HP DX2250 with dual SATA drives and a HP D530 with 1 EIDE drive and 1 SATA drive. On each computer Windows XP Pro is installed on the first drive and Fedora is installed on the second drive. I have had no problems installing and running Fedora 15 on the the DX2250.
My persistent problem lies with the D530. I have installed Fedora 15 on the SATA drive several times. I used the Fedora live cd and I have used PreUpgrade. Every install results in the Error 16: message occurring during boot and ending with a Grub prompt. I have even unplugged the EIDE drive during Fedora boot and still get the problem. I might also add: the machine hard drive boot is controlled via F10 and changing the drive controller order. I have installed and used Fedora on both machines from Fedora 11 thru Fedora 14 with no problems. This error is new with Fedora 15. My next attempt is to install Fedora 15 on the SATA drive with the EIDE drive unplugged. All ideas or SWAG guesses are welcome.
[Code]...
View 7 Replies
View Related
Mar 28, 2011
I got a new laptop recently, it came with an ssd drive and preinstalled win7. I downloaded the latest gparted livecd and shrinkd the win partitionto make room for slackware (i'll need the win instaltion for a month or so). Slackware current runs very well on it. Except for the strange error when I run Lilo:
Code:
root@tofiks:/boot# lilo
Warning: LBA32 addressing assumed
Added Slack *
Warning: Device 0x0800: Inconsistent partition table, 2nd entry
CHS address in PT: 153:27:3 --> LBA (2315063)
LBA address in PT: 2459648 --> CHS (162:162:3)
Fatal: Either FIX-TABLE or IGNORE-TABLE must be specified
If not sure, first try IGNORE-TABLE (-P ignore)
When I add that option "-P ignore" it installs fine and I can boot.
Code:
root@tofiks:/boot# lilo -P ignore
Warning: LBA32 addressing assumed
Added Slack *
Warning: Device 0x0800: Inconsistent partition table, 2nd entry
CHS address in PT: 153:27:3 --> LBA (2315063)
LBA address in PT: 2459648 --> CHS (162:162:3)
Warning: The partition table is *NOT* being adjusted.
Added w7
3 warnings were issued.
View 7 Replies
View Related
Jun 6, 2010
how do you get connection on the bluetooth
View 1 Replies
View Related
May 10, 2011
I have the dm1 3020 (the version found in most stores) with the ralink rt5390 wifi/BT card that so many people have been posting about, and would like to know how to make sure the bluetooth is disabled. Since I don't have any BT stuff to connect and really want to get all the battery life I can out of this thing I am using Ubuntu 11.04 with KDE, if there is a plasma widget I could use to make sure its disabled? There is no BT icon in the notifications area on the bar.
View 9 Replies
View Related
May 25, 2011
I upgraded from 10.10 yesterday. The Bluetooth is disabled. Even when I click on Blue Tooth on, it doesnot get highlighted or detects the nearby devices. In 10.10 , it worked just fine.
View 9 Replies
View Related
Jan 7, 2010
I have a Dell Vostro 200 running Ubuntu 9.10 (Karmic). I want to add Bluetooth capability to my machine. Can anyone recommend an USB Bluetooth adapter that is known to work with Ubuntu 9.10? Perhaps specifically Vostro 200, but I know chances of that might be small.
View 7 Replies
View Related
Apr 1, 2010
I have a 9.10 installed on my USB stick drive and I am trying to get my iPhone to tether with bluetooth. I followed a guide, (installed blueman, connected to phone, enabled tethering, set to trust device and provide network access). The computer connects to the network and says it is successful, and the iPhone has the blue flashing banner saying it is now tethering, but firefox doesn't connect to the internet.
Is there a way to force it to use the new tethered connection?
View 3 Replies
View Related
