used to use my 3 skypephone s2 as a mobile dongle with windows 7 - trying to use it with ubuntu netbook and its not seeing the phone, instead shows as amoi technology with a code of 0x1000, is there any way round this as the phone registers its connected and will show up as a mass storage device if i select it from the phone but wont connect otherwise.
View 4 RepliesI bought a mobile broadband dongle from 3 network. Naturally it's only compatible with Windows and Mac OS. How do I get it to work with Ubuntu?
View 9 Replies View RelatedI'm planning to buy a mobile dongle from 3 (this one: [URL]) but I don't want to tie myself down to a contract before I'm sure that it'll work.
I have a 64-bit computer with Ubuntu 10.10 and WINE installed, so if I was to buy it, how would I set it up?
I had previously been sharing my ethernet connection over wireless using Hostapd & dnsmasq on my headless server as this tutorial shows: here which had been working fine. I now wish to share my USB mobile broadband over the wireless. I using a ZTE MF112. I was able to get the connection working using the application wvdial.
- Firstly I had to create a hard link between /dev/gsmodem & /dev/modem
- wvdial then made a new connection ppp0 which would work for internet access.
Changing the interfaces to have the br0 port like so:
Code:
iface br0 inet static
address 192.168.1.1
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
bridge-ports eth1 ppp0 wlan0
Flushing the IPTables & then adding:
Code:
iptables -A FORWARD -i br0 -s 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -A FORWARD -i ppp0 -d 192.168.1.0/255.255.255.0 -j ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
Doing so works fine, but I'm not entirely sure how to make this all automated. I could try making a script to launch, but I don't have a huge amount of experience writing scripts. Is wvdial the best application to use? Keeping in mind I'm using a headless server. I use Squeezebox server & the scrobbling didn't seem to be able to connect to last.fm. Do I need to specify which connection Squeezebox uses?
I few days ago I bought a mobile broadband, with dongle model Huawei e1820. I have no problem connecting to the internet. The settings in network manager are correct. But when I use the modem with high traffic for a while, like streaming, the speed gets slower and slower until finally the modem shuts down and restarts itself. After the modem restarts, it connects to the internet again, but now the speed is terrible. And if i continue using high traffic it will restart itself in a matter of minutes. But if I plug it out and don't use it for a while, the speed is back to "acceptable". For a while...
I'm using fedora 15, and have also tried it on Ubuntu Natty with the same result. Reinstalled usb_modeswitch. configured usb_modeswitch with all the guides on the web. No results.
I'm new here. This is my first post. Something tells me my problem will be met with great sighs and shrugs of shoulders. I think you may have heard this problem just a few thousand times. couple of days ago i took the plunge and installed Ubuntu 9.10. I already run XP Pro. I have the system set for dual booting until i get to grips with Linux and have all that i use daily from software to hardware comprehesively installed and running. then i have this ideal romantic dream of dumping my microsoft heartache, and living a happy life with the new love in town (an OS that works!)
Vodafone (Huawei K3520) mobile broadband dongle. Yes i know its a touchy subject but i am going cross-eyed reading info on various forums from this one to the betavine forums and a detour through vodafone themselves. I just can't find clear concise info on how to get this dongle up and running with Ubuntu. My laptop is Acer Aspire 5633 WLMi. I would really really appreciate your help on this subject i need to get online with this dongle and Ubuntu.
I have a Acer Aspire running dual boot Ubuntu 9.10 and Vista. Although it has an Atheros wireless card (AR5001 according to linux, AR5007 according to Vista) until recently I didn't have any apparent problems with it.I installed a ZTE MF112 Mobile Broadband Dongle. Now I am experiencing great difficulty in communicating with my wireless router (with both LAN and WAN traffic). Connecting to the network in the first place appears to happen quite smoothly and my computer obtains a DHCP IP address. However the ping response times are measurable in seconds rather than the milliseconds I would expect, and any traffic across the network crawls, or just times out and fails.
I do not believe it is the router at fault as two laptops, both also with Ubuntu, can connect to it fine and swapping it out for another router does not fix the problem either. Also there is no problem connecting from Vista.I suspect that installing the dongle has altered something which has made the bugs in the wireless card/drivers apparent and that's where I need some help.
I have just installed ubuntu 10.10 sucessfully, but it doesn't recognize my mobile huawei alisa internet dongle.
View 1 Replies View RelatedI am a newbi both to this site and linux only installed Mandrake 8.2 for the first time 3 days ago. I am trying to install my three 3G USB dongle in Mandrake it seems to see the dongle in usbview and if I lsusb form the command line. I did see some where that the driver had not been loaded, I have been trying to use setserials to set a virtual serial port to the device but as I am a windows engineer and am not sure of the process and commands need HELP... I have read that the 3G dongle can be used as a serial connection it seems other people have done this on the web, but I need help can anyone explain how to connect to a usb device as a serial ttys*. I must also point out that this dongle has a virtual CD-rom and a built in memory chip which installs the drivers in windows when it is plugged in.. what are the steps to install or shouldI upgrade to a newer version of linux.
View 12 Replies View RelatedAnyone knows how to connect T-Mobile dongle to CentOS 5.5 please tell me.Another question I would like to open mozila firefox automatically at certain hour of day. What script should I write in the console?
View 1 Replies View RelatedI havejt upgradd mylatopto WIN 7 but now i want to ry Linux, SUSE 11.2
I am worried that the gprs i use for internet will not work.
I rang my internet supplier and they told me NO! They only support windows and MAC!
Whats so hrd about including Linux ?
Need a bit of help with this have got the broadband side working lovely on Mandriva linux but it should show as a removable drive in fact in windows it shows as two on linux none its as if there not there.Can anyone point me in rite direction to sort this.it sort of see but it just is not available normally removable drives just come up
View 1 Replies View RelatedIm having a lot of trouble getting my t mobile dongle to work. I have looked through most of the other threads about resolving the problem. when I see the answer about typing comands into the terminal I get lost and dont know what to do... I now have ubuntu 10.04 and 11.04 duel boot on laptop (hp nx6325). Cant seem to get it work on either virsion. I have tryed to chance passwords as other threads have sugested.
Am now trying (and failing) with this thread http://ubuntuforums.org/showthread.php?t=1147685 I have downloaded the mode switch and extracted it to the desktop. In the above thread it say "3) Open the Terminal, and go to the location of the decompressed file and execute"
1) does squeezy allows out of the box work for huwai dongle/ mobile broadband? (i never was able to configure mobile broadband in lenny thus i couldn't have kept lenny in my pc for more than 3 hours)
2) if i install squeezy (which status is 'testing' at the time being), do i need to reinstall squeezy once it becomes 'stable'?
3) any major difference between squeezy/debian and ubuntu?
I've just installed Debian 7.6.0 with KDE onto my laptop and now I want to connect to the internet with my Mobile Broadband dongle. When it's plugged in, I follow the icon in the taskbar to the Network Connections window.
Then I try to add a MBB instance with the pop-up assistant. After I've answered all the questions another pop-up tells me:-
"Insufficient privileges"
What's going wrong here and how do I get Debian to work the dongle (which works on my Desktop Debian 7.5.0 that uses Gnome)?
I have use my e169 mobile broadband dongle with Ubuntu without trouble.With Ubuntu network manager I can connect easily. Few days back I want to try for Kubuntu and I installed it through Ubuntu.Now I can log to either Ubuntu or Kubuntu.But when I connect to Kubuntu I cant connect to Internet with Kubuntu network manager.When I try to make a usb disk with kubuntu I realise that my usb dongle detected as a disk.How should I connect to Internet by using my usb dongle.
View 1 Replies View RelatedDoes anyone know how to connect to Huawei E122 Mobile dongle? I used to connect to E169 usb stick via umtston.
View 3 Replies View RelatedI installed Debian Squeeze on my Acer AspireOne yesterday, and was delighted to see that my ZTE MF627 broadband dongle (from 3 UK) appeared to work "out of the box". I wasn't able to connect due to lack of signal, but the behaviour was as I expected. (The dongle is one with a "zero CD" that needs to be ejected before the modem itself can be accessed. Recent versions of udev are supposed to do this automagically.)
However, when I tried to use the dongle today, I was unable to make it work. It appears that udev is no longer ejecting the zero CD when it is inserted, but is instead detecting the modem as a (non-functioning) serial port.
Here is the output from /var/log/syslog for the "successful" attempt. Note the disconnection at 4769.479857 which is followed by reconnection as a different device:
Jan 16 14:11:30 john-netbook kernel: [ 4759.175449] usb 1-2: Product: ZTE CDMA Technologies MSM
Jan 16 14:11:30 john-netbook kernel: [ 4759.175459] usb 1-2: Manufacturer: ZTE,Incorporated
Jan 16 14:11:30 john-netbook kernel: [ 4759.175762] usb 1-2: configuration #1 chosen from 1 choice
Jan 16 14:11:30 john-netbook kernel: [ 4759.180622] scsi3 : SCSI emulation for USB Mass Storage devices
Jan 16 14:11:30 john-netbook kernel: [ 4759.181863] usb-storage: device found at 4
[Code].....
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedI just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies View RelatedI want to buy a wireless dongle to establish a bridged connection in my home. I mean, does anyone have a wireless dongle which works perfectly for Karmic without ndiswrapper? Some of the information in the Ubuntu help page is outdated.
View 1 Replies View RelatedCant install my wireless network with kubuntu...tried with cd bt cant work
View 1 Replies View RelatedAt the moment I am in the UK using broadband but in a week I will be flying back to India, where I normally connect with a 2G dongle. This comes with its own software that installs when plugged in for the first time and uses an Airtel sim card. Of course this is in Windows so what's going to happen when I go back and try and connect using Ubuntu? I have done a cursory search and note that I should use the Network Connections service, but this relates to 3G, not 2G. Will that make a difference? Is it a suitable replacement for the normal software my dongle installs? I should add that using a Bluetooth phone with the sim card is not practical, I do need to use the dongle.
View 2 Replies View Relateda few weeks back I got an Indian Reliance 3g dongle. I installed usb-modeswitch, plugged in and it seemed to work brilliantly in Ubuntu 10.04.The problem was it was dropping the connection every ten minutes. The logs had the error message "Terminating on signal 15".I had to unplug the dongle and then it would connect again.x the problem, I tried installing first Sakis3G and then Betawine, both of which were reported by some users to haved. Sakis said "the device did not report GSM capabilities"d no good.Installing Betawine was apparently a bad idea, as after that the dongle ceased to work with Network Manager and Betawine itself was useless. Uninstalling Betawine and re-installing usb-modeswitch did no good.Now, when I plug in the dongle, the logs say:Quote:
Nov 9 17:52:31 lauri-laptop kernel: [28563.368241] usb 5-2: new full speed USB device using uhci_hcd and address 3
Nov 9 17:52:31 lauri-laptop kernel: [28563.530547] usb 5-2: configuration #1 chosen from 1
[code]...
I am using Ubuntu 10.10 desktop (latest updates) on an Acer Veriton 1000 desktop. I purchased a SMCWUSBS-N# Wireless USB Dongle recently and have been struggling to get it to work. NM-APPLET simply does not show any Wireless option at all. I have tried all the various posts / suggestions that I could Google and I am still nowhere.
Last night I manually loaded the RT3370sta driver. Now iwconfig does show the card on ra0. However, NM-APPLET still does not show any Wireless option at all.
Surprisingly "iwlist ra0 scan" command at the Terminal does show alll the available Wifi connections.
I've bought this Blumax USB WLAN adapter 9009 (ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter). I was specifically happy to read in its specs that it supports Linux [URL].
However, it turned out that the co-packaged CD drive doesn't contain anything Linux-related, and the support page online has gzip package with many files I don't know what to do with [URL]. The online support swallowed my query and hasn't returned any answer.
So, now I am wondering what to do. I don't feel so competent as to be able to compile the drivers on my own, specifying several specific parameters. At least it doesn't compile with default params. how to move forward with this. Apart from returning the device, because I'm too far now from the place where I bought this.
We recently got a new mini PC which came pre-installed with Ubuntu 10.10, so far, so good. Today, we invested in a Vodafone broadband dongle (model number: K3570-Z/K3571-Z). I've installed the dongle on our old XP machine, with no problems, however, Ubuntu won't even recognise that it's plugged in. What am I doing wrong? We've had the new machine for 3 days, so I'm really new to all of it and haven't learnt how to use the command prompt yet, so I'm hoping someone has some advice for a complete beginner. I can't understand why it's not recognising that somethings plugged in, because from what I've found, you need usb_modeswitch in over for the dongle to be recognised as a modem.
View 6 Replies View Relateda K3570-Z with the latest edition of Ubuntu. 11.04 I have used the Network manager to create a connection but when I click on it I get a message saying GSM Network Disconnected you are now offline.
View 9 Replies View RelatedI use a dongle made by Option in windows xp, i started to use Ubuntu some time later , i can't connect with my dongle. If i can do it, i'm gonna stop using windows.
View 2 Replies View RelatedI use Banglalion WiMax usb dongle modem. I like to use it in ubuntu os. When I connect it to my Desktop PC's usb port, it respond nothing.
View 9 Replies View Related