Ubuntu Networking :: Bluetooth 1000H EeePC Paired But Not Connected
Oct 31, 2010
It reads on my phone device, "Paired but not connected". With my icon I can set it up just fine, I can click "Connect" but nothing happens. I was able to pair & connect my Motorola SD9 Headphones but was unsuccessful in actually getting any sound from the head phones or the microphone to work. (But it does say paired and connected).
I know nothing about bluetooth issues. We do know it's not soft or hard blocked.
1: eeepc-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
Trying to attach my Motorola Bravo (Android 2.1) phone to my Ubuntu 10.04.1 LTS Laptop via Bluetooth. Can see the phone "pair" to it. But If I try to do the transfer of files, or browse (using the bluetooth applet), I can't see the phone.
Where are the configuration files for bluetooth in Lucid?
I've tried a few suggestions in similar threads.. to no avail. I thought I had it fixed a few days ago when I noticed that the wireless would randomly disconnect only on battery power. So I tried "iwconfig wlan0 power off" and then reconnected. It worked, for a while, but then after minutes/hours later it will disconnect and stay disconnected until I restart. If you need anymore information, let me know. I might need to be walked through the process; though, as I'm a worthless noob.
I have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.
I recently installed F14 on my EEEPC 1000H. Fedora is the distro that fully supports it, at least F13 (with the wireless drivers installed seperately). I noticed that F14 worked totally out of the box, without even having to install wireless drivers. However, there is a problem: If I turn off the wireless (using Fn + F2, I haven't tried any other ways) I then can't turn it back on. I mean, the lights indicating the wireless is working are on, Fedroa still says "Device is not ready".
I have an ASUS Zenbook UX31E with Debian testing and LXDE as a Desktop environment. I have a Logitech T630 Mouse that I connect through Bluetooth. When the mouse is paired I can use it properly but I get random keys typed in my desktop such as "1", "2" or "/".I am a regular user of Debian, and I have being using the system for several years now even worked as sysadmin for sometime. However I do not have much knowledge about Bluetooth devices management. I found no information on this issue on the internet and I do not know where too look for more info on my own system. Here is some info I got:
I have tested "blueman-applet" and "bluedevil" as desktops applets and pairing through console gives same results, so it seems like a problem with the bluetooth communication.
I have windows 7 and ubuntu karmic dual boot system.i can easily transfer files via bluetooth in windows 7 but in ubuntu it shows a message bluetooth adapter not connected while as i dont use any such adapter while working in windows .
I have a liveusb running Fedora 11 on my hp laptop. I would like to use my T-Mobile Dash 3G unlimited data connection. I have seen many posts regarding wvdial, modem scripts, etc that are going a little over my head. I was able to connect my phone to the laptop, but when I tried to initiate internet sharing on the phone via Bluetooth PAN, nothing happened on the computer. I was connected but not able to do anything.
I saw some developer in a blog mention that he had put Bluetooth PAN support in Fedora 12. Is this not available in F11? Should I try moving to a F12 liveusb for this?
Has anybody had success getting a Tmobile 3G to work with F11?
I would rather use the USB connection so I could charge simulteously, but this looks a lot tricker.
Some data:Attached because on posting I get an error even though there is not a singel image or smiley:You have included 11 images in your message. You are limited to using 8 images so please go back and correct the problem and then continue again. Images include use of smilies, the BB code [img] tag and HTML <img> tags. The use of these is all subject to them being enabled by the administrator.Couldn't upload either it gives invalid file so I resort to Google docs now [URL]
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code: Serial port connected to /dev/rfcomm0 How do I see the serial communication on this?
I tried on console
Code: $rfcomm listen 0 but it's stuck at Code: Waiting for connection on Channel 1 Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on. the bluetooth dameon is on, and when i press the turn on button, nothing happens. in windows the stick works fine.
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code: Model: Unknown model (id =0x3000) Vendor: atheros Communications, inc[code]....
I have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working. Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2) Network is working perfectly under Windows 7 and Fedora.
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related. Code: [44096.275923] RX DESC f30ca000 size = 2048 [44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0 [44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat [44096.281424] 1. Phy Mode = 0 [44096.281435] 2. Phy Mode = 0 [44096.309841] 3. Phy Mode = 0 [44096.314533] MCS Set = 00 00 00 00 00 [44096.316196] <==== RTMPInitialize, Status=0 [44096.316280] 0x1300 = 000a4260 [44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11) [44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116 [44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11) [44106.768056] ra0: no IPv6 routers present
I just install Ubuntu 10.04 on my EeePC and I'm loving it. the only problem is I can only get wired internet. I was going around the help but I couldn't find my problem. others also have had the same problem as me. here's all the information I think you'll need:
NOTE: I cut out alot of the outputs because the didn't appear useful (like my USB devices etc.)
NOTE2:any commands you want me to run just let me know (BTW I wont run stuff like mkfs... I'm not that new)
NOTE3:Ubuntu Desktop works quite well on a EeePC actually. EDIT: vBulletin wont let me have multiple spaces! I'll replace them with dashed in the lsmod output.
I purchased an EeePc 900HD (ASUS). Installed EeeBuntu_3.0 when I run "lshw -c network". I got a "DISABLE" status for my ethernet connection. In this forum I read that I need to run: "ifconfig *logical_hardware_name* up" The "DISABLE" status is gone but still no ethernet connection in the Gnome-NetworkManager.
i've just installed ubuntu netbook remix 10.10 on my asus eeepc 1015p. whether i use an ethernet cable or wireless, i can establish a connection, but i can't access any websites through firefox or get software via the software manager.
i've attached some terminal screenshots from my attempts at troubleshooting, which i think contain all the relevant hardware info.
i've already searched the forums and see a lot of problems similar to mine, but none seem to involve the same combination of hardware / ubuntu version as me. since i have no experience, i'm hesitant to try to apply solutions that i don't understand and in which i'm not totally confident.
My netbook model is Asus eeepc 1201n and I'm running Ubuntu 10.10 but I had the same problem while running 10.04: wireless disconnects and reconnects every 30 minutes or so and, after this has happened for a few times, it doesn't reconnect and keeps asking for the password.
I had a dual install of Windows and Ubuntu working for a good week, then I reinstalled Ubuntu, completely wiping the machine. My connection is greatly reduced--updates take hours to install, but internet surfs okay.
I have an eeePC 1000HG, basically identical to the 1000H but with an integrated 3G modem.
Mostly the netbook works fine, the only big problem is the 3G modem will not connect to the network.I added a "Mobile Broadband" network connection from the network icon at the top right.The OS has detected a modem, it reports as a "HUAWEI Technology HUAWEI Mobile" in the mobile broadband network setup wizard, and as the follwing with lsusb;
Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem I don't know whether that's correct - I can't find information anywhere which definitively specifies which model of modem is in there.... I did find some reference to it being a Huawei E770V, but I don't know if that's true or not. I have installed the modeswitch packages from Synaptic, which made no apparent difference.
I followed the wizard and picked Australia as a location and Virgin Mobile as a provider and Mobile Broadband as a billing plan.When I try and connect I just get an error saying the connection failed.The modem worked out of the box under eeebuntu 3.
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
I just installed ubuntu 9.10 netbook remix (karmic koala) on my eeepc so im pretty new to linux but getting the hang of it. i was running windows before and the wireless and wired connections were perfectly fine. when i installed ubuntu, i chose it as my main system and wiped windows. now i cannot connect to the internet through the ethernet cable or wirelessly. even though i put in the right ip adress etc it doesnt work. the wireless doesnt even pick anything up so i uninstalled network manager. i installed wicd network manager and that doesnt pick anything either. BTW using a Ralink RT2860 network card.
Its seems Fedora 11 on eee pc 1000h cannot connect to any wireless type(Open, WPA2, WPA or WEP) of a hidden network(non broadcasting SSID). Though it can connect to visible ones(broadcasting SSID), since my college is on a hidden network this a problem for me. Though I can't really test if its just fedora 11 or rpmfusion drivers for it 1000h model related problem.
I can't use Network Manager (it continue to ask me for the WPA password9. So I stopped it and I use command line, following this: [URL]
From the log I can see that it tried to associate to AP and after a lot of tries: it connects BUT the connection is really SLOW and UNSTABLE! (pinging hosts on the same network gives me about 50% packets loss) I am worried about this entry in the log:
Code:
ath5k phy0: unsupported jumbo
I am going to try to install madwifi, but before that I'd like to have your opinion and listen your experience! I see a lot on infos about ath5k, but I'd like to be pointed to the right direction!
On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
I have just purchased an Asus EeePC 1001HA netbook and I would like to install Ubuntu Netbook Edition 9.10 (love the look and the brilliant interface), but I can't get the wireless network to work. I am currently running from a 4Gb USB stick that has the LiveCD on it with a 1Gb persistence. The network notification area only shows wired and VPN connections. I have tried installing the Ralink 3090 driver but I have had no luck in getting the wireless to work.
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
