Lost wired&wireless conections in eeepc 1001px with 10.10 netbook edition, which used to work.
Wireless keeps asking password
Wired is disconnected and doesn't connect
PatchesTheCaveman asked some information, it's attached as a .txt-file, because I don't know how to copy and paste in this Mac I'm using now.
I have just purchased an Asus EeePC 1001HA netbook and I would like to install Ubuntu Netbook Edition 9.10 (love the look and the brilliant interface), but I can't get the wireless network to work. I am currently running from a 4Gb USB stick that has the LiveCD on it with a 1Gb persistence. The network notification area only shows wired and VPN connections. I have tried installing the Ralink 3090 driver but I have had no luck in getting the wireless to work.
View 8 Replies View RelatedI have a netbook (toy) running Ubuntu 9.04. It has a wired Ethernet NIC and a wireless NIC. They both work fine but I have a question about how to integrate the netbook into my network.
Here is my network design:
Each computer has the reserved IP address devices listed in its host file.
So now comes the netbook, taylor13. For the moment I have hard coded IP addresses on the netbook as follows:
I have added to each host file:
I can now connect to the netbook with the desired interface so I guess all is well. However, this seems a little like a jury rig approach.
Is there a better way? Perhaps a configuration where I could request a connection to "taylor13" and the "system" would figure out what if any paths were available to the device and make the connection?
My router flippeth me the bird if I try to assign the same name to two IP addresses or the same IP address to two device names.
I also realized as I write this that I have a chance of stepping on 192.168.0.113 if I do not reserver it in DHCP.
Running Ubuntu 10.10 on a Dell 710m. Fresh install of OS yesterday. Initially I had wired connection but no wireless. So I started chasing threads & trying different downloads & commands [WITHOUT KNOWING essentially what I was doing; throw your rocks at me HERE] & now I have lost the wired connection also.
Also:
[a] If I go into System > Administration > Additional Drivers, I get "No proprietary drivers are in use on this system."
[b] As far as being able to copy a downloaded driver [using a working M$oft machine with net connection] onto an SD card & transferring that driver to the Dell laptop, I have tried formatting 3 different SD cards with the Dell, & each time I come up with various failure errors--& I have no idea why something as simple as formatting an SD card isn't working.
I just bought an Asus EeePC 1201PN and am planning on installing Ubuntu on it. I prefer the traditional desktop interface and thus would like to install it. I have read accounts of people having no problems with it on the 1201N and am assuming it will be the same for my netbook.My question is is there really any difference if I install the Netbook Remix Edition then get the Desktop-Switcher and change it to the traditional interface? I heard that the NRE doesn't use Nautilus. If I install NRE then use the Desktop-Switcher will I be able to use Nautilus or will it still be the NRE with everything else to "optimize" the netbook's performance?
Would it be possible to install the Desktop Edition then get repositories for things that will help my netbook perform better?
I have, in vain, tried to run or install Ubuntu Netbook Edition on an Asus Eeepc 1001PX.I have downloaded ubuntu-10.10-netbook-i386.iso and checked its md5sum, set up the installation media to both an USB-stick and a SD memory card using Universal-USB-Installer-1.8.3.3.exe and the Ubuntu Startup Disk Creator.The Asus already has an Ubuntu 10.10 Desktop which was easily installed using the same procedure.
View 1 Replies View RelatedI've just installed 10.10 Netbook remix on my netbook and I am experiencing problems with the applications requiring repeated clicks to launch. Has anyone come across any fixes to this issue? I have reverted to logging into a Desktop session in the meantime but do like the netbook optimised screen layout.
View 3 Replies View RelatedUsing eeePC1000 with Xandros installed and investigating installation of Ubuntu, especially seeing that there was a netbook version. Have had some problems creating a bootable USB, but followed a thread on the netbook forum that I think will be useful. Before going ahead I wanted some advice on a few things:
- does the Ubuntu OS install over Xandros or is there work to be done post install to clear Xandros out?
- if i want to keep using Thunderbird, StarOffice etc. as supplied with Xandros can I install these to Ubuntu?
Sorry if above all seems obvious: sites I've been to, or books are great at telling you about how good the OS is and how to install but nothing on what happens to the old OS.
I have problems installing Ubuntu Netbook Edition (ubuntu-10.10-netbook-i386.iso)on Asus eeepc 1001PX. code...
I have tried both Universal-USB-Installer-1.8.3.3.exe and the Ubuntu start up disk creator to prepare my USB-stick.
I have earlier installed the Ubuntu desktop 10.10 on the same machine with the same method without problems.
Since the update to Squeeze, I've lost the ability to paste text by pressing both right and left mouse buttons. I'm using an EeePC, so I have no middle (scroll) button. I use this a lot,because I copy-and-paste IPA pronunciations of words onto worksheets I use at the school I work for*. *input the IPA symbols myself aside from choosing them from lists of symbols in LibreOffice excruciating when you've got to do it every day...
View 1 Replies View RelatedI installed 8.04 on my EeePC 2005. I use the Windows dual boot option. The netbook's hard drive was factory set with two partitions c and d. Windows XP is on c; I put Ubuntu on d. In Windows, I have both wireless and ethernet (sp?) working fine.In Ubuntu, I have no wireless and no land line. The manual connection wizard pop-up shows no networks anywhere. How can I get Ubuntu connected? Would it be simpler to load another distro like Easy Peasy on top of Ubuntu? Or should I delete Ubuntu and start over? Or is there an easy fix for 8.04?
View 4 Replies View Related1. hardware: HP/Compaq desktop, about 4 years old, 1GB mem
2. FC14 (copied live CD to HD) and updated
3. sshd, telnet, vnc and samba activated (mostly default config)
4. disabled firewall and selinux
5. I have tested all those succesfully from WinXP workstation. For terminal session, I used putty.exe and/or telnet.exe
When I worked with the machine (say TestMachine), I noticed some times that the vnc connection was lost, but restarted succesfully. Similar thing happened with ssh. Also the samba connection was lost, but it recovered after hour or two. Then I tested leaving a constant ping on, and it revealed that some breaks happen. But it is not an infrastructure problem, as pingtest on other machine in the same network is OK.
Again, I tried to connect. No ssh, telent, vnc or samba worked. But surprisingly, I was able to telnet to another system first and then telnet to the TestMachine from there. I was able to use it for a while. But then, session was broken and now I can't access it anymore via network. I tried to browse /var/logs but I didn't find anything revealing yet.
I'm just coming back to Ubuntu after last seeing a GNOME desktop almost a year ago now. Just installed the new 10.04 version on my EEE 1000h with little to no problems. However, since then I've been kinda lost. Is it just me, or has Ubuntu been changed substantially over the last two distributions?
1) How do I change the netbook remix desktop mode? I like the left menu design, however I like the traditional desktop even more. Unfortunately I can't seem to find the desktop mode switcher anywhere.
2) Where is the grub menu.lst found? Looked in the /boot/grub/ folder and it doesn't seem to be there anymore.
3) Where's my multi touch? Do I have to install a package or configure a setting somewhere? With Jaunty it was a simple install and play. This time it doesn't seem that way at all.
Generally I am used to installations of dual boot on different partitions(the traditional method) any windows OS with any ubuntu OS.I tried that with backtrack 4 and Ubuntu 10.04 netbook edition! I had previously installed ubuntu 10.04 and then had an extra partition that had data in it.Went ahead to boot with the backtrack 4 disk BUT it did not give me an option for installing them side-by side so i did it manually by editing the partition with the partitioner! I had 2 swamp spaces one i which was initially there for Ubuntu and the other i created! Then simply formated ine partition with EXT3 and mountpoint of / which made two of them!after installation, the grub shows that there is another OS but when it does not load!
View 2 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI have just installed Ubuntu 10.04 and the wireless connection on my Asus EeePC 1000HE is not working.
Network is seen but connection is always rejected and pops up the dialog requesting my password. Password is entered properly and using proper protocol (WPA2)
Network is working perfectly under Windows 7 and Fedora.
I've tried a few suggestions in similar threads.. to no avail. I thought I had it fixed a few days ago when I noticed that the wireless would randomly disconnect only on battery power. So I tried "iwconfig wlan0 power off" and then reconnected. It worked, for a while, but then after minutes/hours later it will disconnect and stay disconnected until I restart. If you need anymore information, let me know. I might need to be walked through the process; though, as I'm a worthless noob.
View 1 Replies View RelatedHere's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
I just install Ubuntu 10.04 on my EeePC and I'm loving it. the only problem is I can only get wired internet. I was going around the help but I couldn't find my problem. others also have had the same problem as me. here's all the information I think you'll need:
OS: Ubuntu Desktop 10.04
Model: EeePC 1001HA
Wireless Card: RT3090
Lshw Output:
*-network DISABLED
[Code]...
NOTE: I cut out alot of the outputs because the didn't appear useful (like my USB devices etc.)
NOTE2:any commands you want me to run just let me know (BTW I wont run stuff like mkfs... I'm not that new)
NOTE3:Ubuntu Desktop works quite well on a EeePC actually. EDIT: vBulletin wont let me have multiple spaces! I'll replace them with dashed in the lsmod output.
I purchased an EeePc 900HD (ASUS). Installed EeeBuntu_3.0 when I run "lshw -c network". I got a "DISABLE" status for my ethernet connection. In this forum I read that I need to run:
"ifconfig *logical_hardware_name* up"
The "DISABLE" status is gone but still no ethernet connection in the Gnome-NetworkManager.
It reads on my phone device, "Paired but not connected". With my icon I can set it up just fine, I can click "Connect" but nothing happens. I was able to pair & connect my Motorola SD9 Headphones but was unsuccessful in actually getting any sound from the head phones or the microphone to work. (But it does say paired and connected).
I know nothing about bluetooth issues. We do know it's not soft or hard blocked.
1: eeepc-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
i've just installed ubuntu netbook remix 10.10 on my asus eeepc 1015p. whether i use an ethernet cable or wireless, i can establish a connection, but i can't access any websites through firefox or get software via the software manager.
i've attached some terminal screenshots from my attempts at troubleshooting, which i think contain all the relevant hardware info.
i've already searched the forums and see a lot of problems similar to mine, but none seem to involve the same combination of hardware / ubuntu version as me. since i have no experience, i'm hesitant to try to apply solutions that i don't understand and in which i'm not totally confident.
My netbook model is Asus eeepc 1201n and I'm running Ubuntu 10.10 but I had the same problem while running 10.04: wireless disconnects and reconnects every 30 minutes or so and, after this has happened for a few times, it doesn't reconnect and keeps asking for the password.
View 9 Replies View RelatedI had a dual install of Windows and Ubuntu working for a good week, then I reinstalled Ubuntu, completely wiping the machine. My connection is greatly reduced--updates take hours to install, but internet surfs okay.
Code:
mieum@mieum-1000HE:~$ sudo ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:24:8c:29:5e:4b
inet addr:59.17.55.227 Bcast:59.17.55.255 Mask:255.255.255.224
inet6 addr: fe80::224:8cff:fe29:5e4b/64 Scope:Link
[code]....
I have an eeePC 1000HG, basically identical to the 1000H but with an integrated 3G modem.
Mostly the netbook works fine, the only big problem is the 3G modem will not connect to the network.I added a "Mobile Broadband" network connection from the network icon at the top right.The OS has detected a modem, it reports as a "HUAWEI Technology HUAWEI Mobile" in the mobile broadband network setup wizard, and as the follwing with lsusb;
Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem I don't know whether that's correct - I can't find information anywhere which definitively specifies which model of modem is in there.... I did find some reference to it being a Huawei E770V, but I don't know if that's true or not. I have installed the modeswitch packages from Synaptic, which made no apparent difference.
I followed the wizard and picked Australia as a location and Virgin Mobile as a provider and Mobile Broadband as a billing plan.When I try and connect I just get an error saying the connection failed.The modem worked out of the box under eeebuntu 3.
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
Hardware Address: 1C:4B6:85:13:F4
Driver: ath9k
Speed: 1 Mb/s
Security: WEP
[Code].....
I just installed ubuntu 9.10 netbook remix (karmic koala) on my eeepc so im pretty new to linux but getting the hang of it. i was running windows before and the wireless and wired connections were perfectly fine. when i installed ubuntu, i chose it as my main system and wiped windows. now i cannot connect to the internet through the ethernet cable or wirelessly. even though i put in the right ip adress etc it doesnt work. the wireless doesnt even pick anything up so i uninstalled network manager. i installed wicd network manager and that doesnt pick anything either. BTW using a Ralink RT2860 network card.
View 4 Replies View RelatedI have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.
F13 on a EEEPC 1000HD.I have big problems with my wireless card. lspci says:
Code:
01.00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
I can't use Network Manager (it continue to ask me for the WPA password9. So I stopped it and I use command line, following this: [URL]
From the log I can see that it tried to associate to AP and after a lot of tries: it connects BUT the connection is really SLOW and UNSTABLE! (pinging hosts on the same network gives me about 50% packets loss) I am worried about this entry in the log:
Code:
ath5k phy0: unsupported jumbo
I am going to try to install madwifi, but before that I'd like to have your opinion and listen your experience! I see a lot on infos about ath5k, but I'd like to be pointed to the right direction!
On a new ASUS eee PC 1015P, the Windows 7 o/s supplied works fine. Experimenting with a Fedora 14 Linux o/s, currently just booting to a Live User system on a USB Stick, there is no wireless networking. In case it is relevant, the wireless LAN Card details (as reported from lspci) are: Ralink RT3090 802.11n 1T/1R Wireless LAN Card Driver Version 3.1.6.1 Should I be expecting wireless to be working on the USB version, do I need to do a full install to get wireless or is it maybe a drivers problem?
View 3 Replies View Related
