Ubuntu Networking :: Avahi Not Broadcasting Afp To Network?
Sep 6, 2010
why my new Ubuntu 10.04 computer won't automatically advertise afp thru avahi to the network? This is a new install of Ubuntu 10.04, I downloaded and installed newest version of Netatalk, and the Avahi daemon. Both installed with no issues. (I followed instructions from articles on here) I can manually login to Ubuntu afp share from my iMac, by going to "Go to Server" and typing in the ip 10.0.1.3 and putting in the Ubuntu username and password. I just can't get it to advertise or broadcast itself to the network like it is supposed to using netatalk and avahi. I've followed all of the tutorials I can find on this, but nothing works. Even if I issue the command to restart avahi daemon, Ubuntu still isn't seen in the iMac's finder window? Because I can manually login to it, I am assuming that netatalk is working properly. I've even tried to issue the command to restart netatalk first, then restart avahi, but still nothing?
View 2 Replies
ADVERTISEMENT
Mar 9, 2011
I am sharing some folders from my Ubuntu machine, using Netatalk and Avahi, over my network.I access these folders from my Mac using the AFP protocol.When all is well, my Ubuntu folders show up in Finder on the Mac and I can connect to them.But at random intervals, the Ubuntu folders will disappear. Sometimes they reappear a short while later.At other times, they wont appear until I go to my Ubuntu machine, and re-save (even if i don't change anything) the file:/etc/avahi/services/afpd.service.
View 3 Replies
View Related
Jul 24, 2011
I have a laptop with Ubuntu 11.04. Failed to connect my home wireless network, which is composed of a modem and a Netgear router.
ifconfig showing:
wlan0 Link encap:Ethernet HWaddr 00:24:d6:07:2b:a2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:30238 errors:0 dropped:0 overruns:0 frame:0
TX packets:24005 errors:0 dropped:0 overruns:0 carrier:0
[Code]....
I do not quite understand how the virtual interface wlan0:avahi appeared. My guess was, my request "sudo dhclient wlan0" failed to get a valid ip, although I did not get any error message from running that command. I executed "sudo dhclient wlan0" again, but still no error message or network connection.
Later today, I tried to connect to a public wireless network. Still got the same error. But when I reboot my machine, no such problems.
View 5 Replies
View Related
Feb 14, 2011
My wireless network doesn't work. I get no list of broadcasting networks. I have runned 'collectHWData.sh'. This is the output. Does anyone know what I should do to make my wireless work? The problem occurs on my clean installation of SuSe 11.3 on my laptop PC C500 Compaq.
Code:
collectNWData.sh V0.6.5.4.1 (Rev: 1.282, Build: 2011/01/25 19:33:38 UTC)
!!! CND0470I: Reduced analysis capability and less network information because script was
[code]...
View 9 Replies
View Related
Jan 3, 2011
I have a RHEL 5 Server dedicated to web hosting. HTTPD 2.2.x.x is running on it with PHP and MySQL. The machine is not a server system (hardware wise, a C2D 2.66 with 2GB RAM and 2 x NICs). I have a CIR Fiber link with a pool of live IPs. The machines including this web server is plugged into a switch which has all the live interfaces and is separate from the LAN switches. The problem i am facing is that, when ever this web server is plugged in, the traffic on live switch is choked. Internet slows down to a halt (as live interface of proxy is plugged in this switch. DNS stops resolving name due to time outs. Mail delivery is slowed and the mail ques pile ups. The moment i get this machine of the switch, all the traffic becomes normal. Therefore i have deduced that this is the faulty server. I do not know if this server is hacked and working as a bot or it is a mere hardware problem(faulty LAN Card).
View 3 Replies
View Related
Jun 19, 2011
My wireless card (Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)) Will not broadcast to wireless router. Somewhere along the line it showed as being disconnected. Using ndiswrapper and it is installed correctly and the wireless switch is in the on position.
View 1 Replies
View Related
Jan 27, 2011
I am not well versed in networks, I want to understand whether broadcasting is possible through a TCP based Server? If yes, then what are the complications? I searched Google and found this: [URL] It said
Quote:
The types of broadcasting uses on TCP/IP that I know about are:
1. ARP on IP
2. DHCP on IP
3. Routing table updates.
View 4 Replies
View Related
Aug 10, 2009
using a text interface for my computing but I have run into an issue. Does anyone know of a CLI networking tool that will allow me to connect to a non-broadcasting network? I have tried cnetworkmanager and attempted wpa_cli. The first does not seem to support it and I have not played too terribly much with the second. I have discovered that when I boot my comps into KDE and tell NetworkManager to connect to the network cnetworkmanager can find it then, but that does me no good for what I want, which is to boot my computers straight to runlevel 3 and get connected. If it means anything I am running F11 on a Dell Inspiron 1521 Laptop with a Broadcom wireless card (awfully annoying to set up, but it is working fine) as well as F11 on a desktop of my own designing with a Netgear wireless adapter.
P.S. I realize that broadcasting the network would be the trivial solution but alas I am not the admin on the router and he is out of town.
View 6 Replies
View Related
Jul 25, 2010
I have a few ubuntu machines in my house, 1 mythtv backend server with other services as well, 2 mythbuntu frontends boxes hooked up to tv's etc. I wanted to push the audio from my laptop out over pulseaudio to the machine connected to the AV equipment.
I could not see any other pulseaudio sinks in padevchooser... this lead me down the road to investigating avahi.
When I run avahi-browse on my laptop (hydrogen) it only returns the services published from itself:
Code:
$ avahi-browse -ta
+ wlan0 IPv4 byron's remote desktop on hydrogen VNC Remote Access local
+ wlan0 IPv4 hydrogen [00:1b:77:71:97:76] Workstation
[Code]....
My laptop has vmware on it, and I've changed the vmnet intefaces to not support multicast so avahi ignores them. but I'm still at a loss to why my laptop can't see the other machines on my network with avahi (mdns).
View 1 Replies
View Related
May 5, 2011
I've got problem with Avahi on my laptop. It can see the other machines and services on the LAN but not it's own local services and I have no idea why. The laptop (hostname: forseti) sports Ubuntu 10.10, installed aavahi-daemon, avahi-dnsconfd and libapache2-mod-dnssd. Firewall is disabled. Other hosts on the LAN are: magni (openSuSE 11.4 with lots of services published and visible from forseti) and freya (Ubuntu 10.10 with gnome-user-share up & running). Forseti can see the other hosts and their services but not itself. The other hosts can't see forseti. Checked both with nautilus and CLI's avahi-browse.
View 1 Replies
View Related
Jan 25, 2010
Since I've updated to 9.10 my avahi-daemon sometimes won't start at boot.I've to "restart" it manually.I reinstalled it without success.Has anyone here the same problem? Or a useful solution?
View 1 Replies
View Related
May 5, 2010
I got a new X201 which is running Ubuntu 10.04. While at home, everything is fine, at work, I encounter some issues with wireless. the signal cuts in and out repeatedly.Here's the output of ping. I set it to ping a server every 90 seconds, 10 times. So this is a snapshot of 15 minutes of network activity...
Code:
PING (REDACTED) bytes of data.
64 bytes from (REDACTED): icmp_seq=1 ttl=252 time=1.50 ms
64 bytes from (REDACTED): icmp_seq=2 ttl=252 time=2.13 ms
64 bytes from (REDACTED): icmp_seq=3 ttl=252 time=1.38 ms
[code]....
Also I tried this (from a 2 year old thread which was most relevant solution I could find):
Code:
Changing AVAHI_DAEMON_DETECT_LOCAL=1 to AVAHI_DAEMON_DETECT_LOCAL=0 in /etc/default/avahi-daemon has got rid of the irritating pop-up. Basically, every 5 minutes or so, for a solid 60 seconds or so I get no signal. I've tried updating the kernel, and doing apt-get remove avant-daemon, but still have problems.
View 1 Replies
View Related
Nov 26, 2010
I am wondering if it is possible to use avahi to resolve hostnames across a gateway. With gateway I mean a linux box with ip_forward'ing enabled to pass traffic between interfaces. The gateway connects two networks with all hosts running Ubuntu and specifically avahi-daemon. The gateway is not running avahi and I am not able to install it there. The firewall configuration on the gateway is not blocking any traffic between the networks. I am able to send UDP packets from a host on one network to a host on the other.
When I run tcpdump on a host and try to ping that host.local from a machine on the other network I see no traffic. This means that the gateway is not passing the multicast traffic along. Is there any special setup required on the gateway to allow this?
View 2 Replies
View Related
Jun 19, 2010
In a previous thread I had detailed an issue I was having with avahi not firing up properly at startup.As a bit of background: the services available on the server aren't advertising until I restart the avahi-daemon manually after startup - The syslog shows the daemon starting on boot, but it never seems to access the service file.I was wondering if it is possible that this may be a file permission problem?
View 1 Replies
View Related
May 13, 2010
I have recently installed netatalk and avahi-daemon on my lucid server but, much to my chagrin, I have to run
Code:
restart avahi-daemon every time I boot to get the service to advertise.
both avahi-daemon and netatalk have been added to the appropriate runlevels.
View 9 Replies
View Related
Nov 23, 2010
Two machines:
fedora.local = F14 default
mingisapsycho.local = Mac OS X 10.6.4
I want to be able to ssh/scp between these two machines using:
ssh -l login fedora.local
and
ssh -l login mingisapsycho.local
rather than using IP addresses. Neither of these works, from either of the two machines. This does work between Mac OS machines. And I can ssh if I use IPs. So it seems that by default Avahi is not configured even though it is running? I really don't understand. By "does not work" I mean I get on both machines: ssh: Could not resolve hostname blah.local: Name or service not known
View 6 Replies
View Related
Jul 8, 2011
F15 current
avahi-daemon installed
nss-mdns installed
firewall totally disabled (for now while testing)
connected to network wirelessly
For perhaps 5 minutes I can either ssh into or from the F15 computer using:
ssh chris@macbook2.local
OR
ssh chris@f15.local
Works fine, no problems. And then in about five minutes it work resolve in either direction: ssh: Could not resolve hostname f15.local: nodename nor servname provided, or not known
I can still ssh in using an IP address. So I do:
[chris@f15 ~]$ service avahi-daemon status
avahi-daemon.service - Avahi mDNS/DNS-SD Stack
Loaded: loaded (/lib/systemd/system/avahi-daemon.service)
[code]....
*sigh* No that's not it. I just found no mDNS service in or out of the computer 3 minutes 26 seconds after restarting it, no additional items in messages.
View 3 Replies
View Related
Oct 11, 2010
Quote:
Originally Posted by uselpa Why do you absolutely want to remove it? There is no good reason for Avahi-daemon to be automatically installed on a server that is setup up with a static ip address. Also, I would like to someone to explain the loqic in having such a service on a server running an Oracle Database.
All of the servers I manage run a bare minimum footprint. Unnecessary services waste server resources and they are potential security risks if not updated.This is why I want to "absolutely" remove the Avahi-daemon.
Dave Walden
Linux Systems Administrator
CARFAX, INC.
View 3 Replies
View Related
Jun 4, 2010
In the web about ONLINE TV BROADCASTING under/with LINUX SERVER, i am not sure even how to spell it correctly, because i never had a need of such NFO. I need any kind of information regarding ONLINE TV BROADCASTING. I tryed but maybe my tryes are not hard enough to find something in the web, i know such information is not widespread.
View 9 Replies
View Related
Jul 16, 2010
Yes I know there was so many themes created about broadcasting shoutcast radio, but I wasn't got information where program work good. I have tried IDJC, but not work. I need the program that I just install it and works. Program should have 2 audio players (1 is good too) and microphone "player" for talking (key OFF/ON).
P.S.: My PC runs Ubuntu 10.04
View 1 Replies
View Related
Jun 9, 2011
I was using rygel two months ago with ubuntu 10.04 and it worked great. Then I installed windows so I could have a dual boot system. This week I finally got around to reinstalling Ubuntu, and upgrading it to 11.04 and am having issues. I went into rygel's preferences and specified the directory I wanted to share. In that directory i have the movies sorted into eight folders by genre. At first I used the MediaExport plugin but three of the folders don't have content when I open them on the bluray player (LG bd570). When I use the Tracker plugin it seems I get completely random movies broadcasted but definately not all. I added tags to my movie files so I didn't have to scroll through all of them to find what I wanted and although the tags I added show up under the tags folder in the bluray none of the tags have any files under them.
View 1 Replies
View Related
Mar 26, 2011
i use ubuntu linux,and i can view webcams of other people on fubar but i can not broadcast my own, i already installed adobe flash on my browser. heres the error i get
"camera in use in other window, close other window to chat"
i know it seems like an easy fix but the camera is not in use anywhere else so i was looking for advice on why i cant broadcast if i can view others broadcasting. the camera itself works because i installed 'cheese' and it opens up and works without a problem just having a problem using it for live broadcasting, maybe i am missing a plugin for mozilla...
View 1 Replies
View Related
Jul 18, 2011
I have been able to get a live Ustream broadcast going but the video is terrible. Ustream recommends using Adobe's Flash Media Encoder (FMLE) but there is no linux version. I was browsing around and found webcamstudio that is supposed to work for this but I cant seem to figure this out. My webcam is a Logitech HD Webcam Pro 9000 and is capable of the level of quality that I want. I and the audio I have works great. I am currently running Linux Mint.
View 1 Replies
View Related
Aug 11, 2011
how to install FFServer (RTMPDump is already installed)? So i mean - what do i need to Download on centOS? I wanna Re-Broadcast some of my Streams with RTMPDump + FFServer
View 1 Replies
View Related
Nov 4, 2015
I have finally made the switch from Windows to Linux even in my workstations at home, after several years running it in servers, routers etc and i only miss one single program that can make me delete my last virtual machine with Windows 7 forever, a professional radio broadcasting program. I have been broadcasting radio for several years and have mostly used Sam Broadcaster for Windows, have been testing a lot of linux-variants but nothing can compare with Sam or Radiodj.ro on the Windows-side. I found the package "Mixxx" lately and it's almost suit my needs but still not quite there yet with soundFx, station ID's jingles, request functions etc.
I have managed to get Sam Broadcaster (version 4.9.1) working very well with Wine, the only problem is that the audio sounds really bad. The sound crancle a lot and i have been trying several workarounds and spent hours on google without success. If i could get the audio sounds better i think the best solution for now is to stick with sam since i know that program in my sleep and it can be configured to use MySQL database to store everything from playlists to lyrics of songs etc, it will be some job to switch program if it doesn't use MySQL.
View 3 Replies
View Related
Mar 15, 2011
what program can i use with opensuse to broadcast live music , i was using IDJC with suse 11.3 after updated to 11.4 IDJC will not work .
View 4 Replies
View Related
Aug 5, 2010
there are many telnet sessions with same login. somebody is always broadcasting message how to know the ipaddress of that machine.
View 1 Replies
View Related
Jan 2, 2010
What does it mean when i get a eth0:avahi ? on ifconfig
View 2 Replies
View Related
Jun 6, 2010
After upgrading from scratch to Ubuntu server 10.04 (previously 9.10), I noticed that my server was cast out of the Cheers bar , i.e., nobody knows its name anymore! (I have several Linux boxes on my home network).
Is there a new direction on how local networks are supposed to be configured? a new protocol? I know my problem is solved by simply installing avahi-daemon, but I wonder how other people are dealing with this issue.
View 5 Replies
View Related
Jan 15, 2011
I am trying to compiling avahi from src.rpm, and got this error: /usr/include/gtk-3.0/gtk/gtkapplication.h:57:3: error: expected specifier-qualifier-list before 'GApplication'According to bug651328 Comment #2,gtk3 in F14 is a dead-end, unfortunately. gtk3 requires a newer glib than f14 has or will have.So how was the avahi rpm compiled? And how can I compile it from src.rpm?
View 3 Replies
View Related
