My wireless card (Linksys, A Division of Cisco Systems [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)) Will not broadcast to wireless router. Somewhere along the line it showed as being disconnected. Using ndiswrapper and it is installed correctly and the wireless switch is in the on position.
View 1 Replies
My wireless network doesn't work. I get no list of broadcasting networks. I have runned 'collectHWData.sh'. This is the output. Does anyone know what I should do to make my wireless work? The problem occurs on my clean installation of SuSe 11.3 on my laptop PC C500 Compaq.
Code:
collectNWData.sh V0.6.5.4.1 (Rev: 1.282, Build: 2011/01/25 19:33:38 UTC)
!!! CND0470I: Reduced analysis capability and less network information because script was
[code]...
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View Relatedwhy my new Ubuntu 10.04 computer won't automatically advertise afp thru avahi to the network? This is a new install of Ubuntu 10.04, I downloaded and installed newest version of Netatalk, and the Avahi daemon. Both installed with no issues. (I followed instructions from articles on here) I can manually login to Ubuntu afp share from my iMac, by going to "Go to Server" and typing in the ip 10.0.1.3 and putting in the Ubuntu username and password. I just can't get it to advertise or broadcast itself to the network like it is supposed to using netatalk and avahi. I've followed all of the tutorials I can find on this, but nothing works. Even if I issue the command to restart avahi daemon, Ubuntu still isn't seen in the iMac's finder window? Because I can manually login to it, I am assuming that netatalk is working properly. I've even tried to issue the command to restart netatalk first, then restart avahi, but still nothing?
View 2 Replies View RelatedI am not well versed in networks, I want to understand whether broadcasting is possible through a TCP based Server? If yes, then what are the complications? I searched Google and found this: [URL] It said
Quote:
The types of broadcasting uses on TCP/IP that I know about are:
1. ARP on IP
2. DHCP on IP
3. Routing table updates.
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
using a text interface for my computing but I have run into an issue. Does anyone know of a CLI networking tool that will allow me to connect to a non-broadcasting network? I have tried cnetworkmanager and attempted wpa_cli. The first does not seem to support it and I have not played too terribly much with the second. I have discovered that when I boot my comps into KDE and tell NetworkManager to connect to the network cnetworkmanager can find it then, but that does me no good for what I want, which is to boot my computers straight to runlevel 3 and get connected. If it means anything I am running F11 on a Dell Inspiron 1521 Laptop with a Broadcom wireless card (awfully annoying to set up, but it is working fine) as well as F11 on a desktop of my own designing with a Netgear wireless adapter.
P.S. I realize that broadcasting the network would be the trivial solution but alas I am not the admin on the router and he is out of town.
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View RelatedHow do I install the correct driver for my Ubuntu 10.10 system for the AR9285 wireless card? code...
View 2 Replies View RelatedI just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
I want to buy a wifi card that will, hopefully, be rock stable under my kubuntu 10.04 64 bit. Currently I have TP-Link Atheros card and stability in Linux is horrible. Please DO NOT give me links to compatibility list. Just suggest a network card that is most likely to be stable with least manual tuning effort required.
View 2 Replies View RelatedThinking of getting a wireless pci card for a desktop and I have seen a lot of people have issues with specific wireless cards. Is there a particular card or chipset that will be relatively painless to use?
I have seen this question asked before, but have not seen any replies.
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Just like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies View RelatedI have been messing around with ubuntu for a few hours now trying to get my wireless driver to work, but I am having no luck. It seems like I installed the driver right, and network-admin use to show the wireless, but I couldn't unlock it to mess with properties. Now it doesn't even show wireless, and I still can't unlock it, so I'm unable to get my wireless card to work.
View 9 Replies View RelatedI have a MSI CX600 notebook with a :Ralink 802.11bgn 1T1R Mini Card Wireless Adapter (this name appears in WIndows 7)Can anybody tell me how to install it on Ubuntu 9.10,because I don't have internet connection.
View 3 Replies View RelatedI just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies View RelatedI'm totally sick of my WiFi Card, a Realtek 8187 connected by miniPCIe, althought internally designed as USB, I've tried all there is, and I've decided to change it. Which brand do you guys recommend? In my experience, I want to avoid Realtek and Atheros, but which brand offer the best "out-of-the-box" experience, and less overall issues? Intel, Broadcomm, maybe another Atheros or Realtek model, or whatever you guys think it's the best choice
View 2 Replies View RelatedBroadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.
View 7 Replies View RelatedI have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
View 7 Replies View RelatedI am in need of some help trying to get my wireless working. I have a compaq presario f557us and my wireless card just seems to be dead. I got this laptop a few years ago and I tried installing ubuntu 7.04. The wireless part did not work out of the box (it took a lot of tinkering but finally got it working by using ndiswrapper). Later I did an OS reinstall but tried ubuntu 8.10 this time and the card was recognized with no problems, I just needed to use the proprietary drivers that ubuntu recommended. Finally I decided to give 10.04 a try. I don't know if doing an "apt-get upgrade" would've been fine but it's too late for that now; I did a fresh install and the wireless part seems dead.
I already tried installing ndiswrapper as I did before:
$ ndiswrapper -l
bcmwl5 : driver installed
later I tried the fwcutter way:
$ bcm43xx-fwcutter -i bcmwl5.sys
Sorry, the input file is either wrong or not supported by fwcutter. I can't find the MD5sum b89bcf0a25aeb3b47030ac83287f894a
[Code]...
Someone had just given me a pc with no OS so I installed ubuntu 10.04. The pc has a wireless card but I cannot seem to get the OS to recognize it. My wired connect is fine but wireless is non-existent.
View 7 Replies View RelatedI have a Dell inspiron E1705 that I recently installed 10.04 LTS on. The wireless card i'm using is a Belkin express card that worked perfectly fine with 9.1 but won't work with 10.04. lspci -v output shows the card as installed with a driver listed but under capabilities is says "access denied".
View 9 Replies View RelatedI'm trying to proselytize and have installed Lucid on my receptionist's Gateway M500 with an Orinoco PCI Mini wireless card.
The card works in XP, but when I boot into Linux, the network card indicator light doesn't turn on, and lspci gives me this:
No wireless card
Pressing the on-off wireless button does nothing.
What can I do to turn on the modem so that Lucid sees it?
