Ubuntu Networking :: Also Missing Connections Tab In GUI
Aug 15, 2010Did ragemaw ever get that missing connections tab? Mine is missing too and furthermore wireshark cannot set up on any interfaces, because it cannot find them.
View 1 RepliesDid ragemaw ever get that missing connections tab? Mine is missing too and furthermore wireshark cannot set up on any interfaces, because it cannot find them.
View 1 RepliesI have recently installed lucid 10.04, and I am having difficulty accessing my wireless. Following instructions to install the drivers for my wireless card, I always run into a problem when I need to configure my card. When I go to system-administration-network, there is no connections tab listed. I can only access General, DNS and hosts.
View 6 Replies View RelatedAn half year ago i reinstalled ubuntu 10.04, there both were no wired and no wireless connections.I have found drivers and it's everything ok with wireless, but i can't connect through LAN.
View 3 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedNeither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
Is it fair to say that connLimit and hashlimit are very similiar on Linux i.e. while hashlimit caters to limits for groups of ports, they both set the connection rate limit per host? How in IPTables, do I configure a policy that limits connections on a port that encapsulates the total sum of all connections from all hosts? i.e. I do not want to allow more than 6000conn/minute for port range that is the sum of all connecting hosts?
View 3 Replies View RelatedI recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedWhen I click on the network manager icon next to the date in the upper right corner of my screen, my network connections do not show up. I have added two DSL connections on my laptop (username & password) but it doesn't show up. Everyday I need to use
Code:
sudo pppoeconf
if I wish to connect to the internet.
Both these connections are added in the same way on my Desktop Computer and it shows up on the network manager. One of them is even the default which connects automatically on startup.
Because it's not working I assume network manager is not compatible with my laptop. Are there patches to install or other programs that can easily manage my internet connection?
I'm using Ubuntu 9.10 on a not-so-new laptop.
So I'm going to try out opendns as an internet filter. But I'm not doing it on a network/router, just on my local machine. Using ubuntu, I read that I need to select each connection and change the dns settings.Is there a way to generically add the dns settings so that if I connect to a new network I don't have to manually update it's settings?
View 1 Replies View RelatedHere is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....
I have been using Ubuntu for a couple of days now and I am starting to like it alot. I decided to install it on my laptop, but getting it to connect wireless is becoming a problem. I have been searching all day on how to fix this but nothing so far has helped.I had Windows 7 installed before and it connected fine.
View 1 Replies View RelatedI have the latest Ubuntu (9.10) desktop. My 2 cards are:
WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.
Fresh install of UbuntuStudio 10.04. This is really bizarre.
I can't seem to connect to the wired connection mainly because there is no connections tab (pic attached).
Here's some printouts:
dmesg:
Code:
lshw -C network:
Code:
I am a user of Ubuntu 10.04 and I use Firestarter because it lets me know which IPs I am connected to, which ports are used, and which applications are using those ports. The problem is that I can't use Firestarter with my non-sudo account (well, I know that I can change my system settings to do that, but I'd rahther not do it).
So the question is: Is there any application that lets the user monitor the internet connection?
Alrighty, I have a couple of questions regarding use of the TSC for remote desktop connections. I'm connecting from my Ubuntu Desktop (Lucid) and i'm connecting to my Laptop (Windows 7) i'm running PC Tools Firewall Plus on the windows machine. The window's machine has remote assistance allowed. At the moment i'm just trying to get the TSC to work on my home network. I filled it out as follows:
Computer: Lappy's IP
Protocol: RDPv5
Username: ZachAdmin
Password: *My password*
Domain: Blank
Client Hostname: Blank
Now the first time I tried to connect, about 20ish seconds passed and "The connection has timed out" appears. So I went into my Firewall and sure enough it was blocking the UDP/TCP packets that my desktop was sending. So I temporarily allowed all UDP/TCP packets. Now when I connect "Connection Refused" immediately pops up. I go into my firewall and it's allowed both inbound and outbound packets from my laptop to my desktop and vis versa. So now i'm really stumped.
Now I know how to set up port forwarding on a router so this is not that. What I want to do is, if possible, connect from Computer A to computer B and use computer B as a proxy for all of the Transmission (bit torrent) connections. I know how to do this with DNS, Http, etc etc but I'm not quite sure how to go at this with torrenting.Note that in this case Computer B is a ubuntu 10.04 server with an SSH server but no torrenting program installed.
View 1 Replies View Relatedi have my connections up & running once i connect my laptop in my .....but the trivial problem of cant browse the internet
View 6 Replies View RelatedSo it snatched up this old Dell Inspiron 5100 with a WN511B wifi card. When I plug the card into the slot nothing happens and no wireless connections show up. Can someone walk me through on getting the wifi card to work?
View 1 Replies View RelatedI run a webserver Apache2, php5, and MySQL. They are all set up correctly and I can access my website at [URL] I have, also installed, noip2 to update my IP address to no-ip.com for my domain name. Here's the problem: I can access my website through that domain name on other computers, both on internet and on the same network. But I cannot access it from my own computer (using the domain name instead of localhost). I need to be able to access the domain name on my computer because some pages on my website have been defined as the address to my domain name and not localhost. I cannot change this to localhost because if I do then people outside cannot work the webpages correctly. I had the same troubles on Windows before and I simply enabled loopback connections by typing in my private IP address along with the domain name into the Windows hosts file. I use version 10.04.
View 3 Replies View RelatedI got this working om my laptop but on my desktop this keeps going wrong, its an upgraded system to 10.04. Made a standard pptp connection using network-manager (and the connection is 100% fine, working on laptop and on windoooz machine) This is syslog any ideas, i reinstalled network-manager-pptp and pptp-gnome, but no go no go..
[Code].....
I have an Acer AspireOne D255 netbook. I just installed Ubuntu Netbook Remix 10.10 and it looks pretty sweet.Right now, I'm on a wired connection. It's not detecting any networks, and I know at least my home wifi should show up (and usually we can get onto our neighbors!)I used to have a different model of an AspireOne (I think it was 531h but I'm not 100% sure) with UNR 10.04, and my network was detected right out of the box.
This reminds me of when I installed the desktop version of 10.04 on my iMac. I couldn't bring the wired connection to the room it was in, and my wifi didn't show up on it. I just gave up because I like my Mac so it wasn't a *huge* deal. but I definitely don't want to use this stupid Windows 7 Starter that comes on this netbook!
I've just started using ufw with the frontend gufw. I've configured it like this:
Accept everything in and out as default Block incoming FTP connections from a certain IPv4 address (brute-force for days)
Today I noticed that IPv6 connections don't work anymore. The connection to two hosts (IPv6 only) times out. As soon as I disable ufw entirely, the connections work again. The host I want to connect to is:
2001:638:a00:f00b:200:1cff:fedb:d38f port 7337
2001:638:a00:f00b:a00:6ff:fe07:cda2 port 7337
These are small telnet servers that print out a number (temperature nearby) and close again. I'm logging those values in a database.
Is ufw not IPv6-capable and blocks things it's not supposed to?
Update: ufw seems complete garbage to me... You can't even configure it while it's disabled! How am I supposed to safely activate it when the first thing it does is blocking all communications? I can't even configure it to let me in before I configure it to keep me out... And then, even if I explicitly let it pass port 7337, it still blocks it through IPv6.
I went to get online on my laptop this morning, and have no connection. When i click on the icon up top in the task bar, it only shows vpn connection. It does not show ANY wireless connections at all. I checked, and the enable wireless is checked. It just does not pick up any connections.
View 3 Replies View RelatedI am thinking of performing a fresh ubuntu install, but I have a LOT of DSL connections created in my laptop (10.10, created through the NetworkManager applet 0.8.1). Is there any file that stores the connection information, and if there is one, where is it?
View 2 Replies View RelatedI own an hp dv9000 laptop, it comes with a Broadcom STA Wireless card... I currently have my laptop connected to the internet through a wired connection, but there is no option at all for wireless.I've already installed the Additional Drivers to install the Broadcom STA Wireless Drivers, and after I reset, there was no difference, no option to choose wireless instead.
View 1 Replies View RelatedIs there any way to turn off the load balancing that occurs when ubuntu detects two active network connections? To be more specific, I have two networks set up, one of which is supposed to be for regular web traffic while the other network is dedicated to streaming various things throughout the house. Whenever I try to connect my server to both networks at once ubuntu "load balances" traffic from the web network onto the streaming network, which completely defeats the segregation I was going for. So far all of my attempts to turn off that behavior haven't worked at all. I'm currently running Ubuntu 10.10.
View 3 Replies View RelatedI'm working right now with ubuntu 11.04 on my asus ul30vt-x1, my wireless n network is working on a linksys e3000 router, my issue is basically with long file transfers. When the issue started i was reaching speeds of 100 Mbps through my wireless network even when I'm connected at 150 Mbps. However when at this speed, I don't know why, the connection is dropped after some minutes or even seconds. I made some testing on windows, I'm reaching 70 Mbps there and no problem at all with dropping the connection.
So my conclusion is that for some reason the linux driver, in my case, is not able to handle such speed of 100 Mbps. I know that a wireless network will have a throughput of aprox 60% the wireless speed. Right now im trying to apply traffic shapping to my transfers so i can get 70 to 80 Mbps, its being working so far.
i've installed ubuntu 11.04 on a friends Asus Eee pc 1005HA netbook. after the installation i tried to connect to the router using wireless, and when i enter the key, it fails to connect, so i tried using an Ethernet cable to connect but that doesn't work either,the network devices on the computer are:
Atheros AR8132 PCI-e fast ethernet controller
Atheros AR 9285 wireless network adapter
It lists the wireless device and the solutions to the problem, however, the solutions seem to be for Ubuntu 10.04 and also 10.10, and im not sure if it will work for 11.04 so far i have been unable to find out anything on the forums about the ethernet
relatively light Ubuntu user here. Installing Ubuntu on my mom's laptop. Installation went smoothly, but I don't have any internet. There seems to be no driver installed for the wireless, I tried to plug the computer into my modem, but it doesn't connect to the internet, won't even find the router. I copy paste some commands from the laptop.
[Code]...
I am trying to find someone that can perhaps assist me with the following.
I have installed my notebook with Ubuntu 10.0.4 and need to setup various VPN connections to clients.
After setting up the microsoft VPN connections according to the normal procedures, I try to connect to one of the clients to test connectivity, but the connection fails.
This happens for all the MS vpn's so far.
I had a look at the daemon.log file and found the following message which I can't seem to find a solution to:
<WARN> connection_state_changed(): Could not process the request because no VPN connection was active.
Is there anyone that could perhpas assist me with this as I am not able to work without VPN.