Ubuntu Networking :: Add VPN Button Inactive In Kubuntu 10.04

May 1, 2010

I installed new Kubuntu 10.04 on my laptop and got some problem with creation of my VPN connection. Actually the problem is that in network manager on VPN tab button "Add" is inactive. I had the same problem with Ubuntu 9.1, but after installation of all packages everything was OK. Now I already have installed all required packages, but "Add VPN" button still inactive/

View 4 Replies


ADVERTISEMENT

Ubuntu :: Configure Multi Button Mouse In Kubuntu

Mar 11, 2010

Does anyone know how to configure a multi-button mouse in kubuntu in order to use the back and forward keys?

View 2 Replies View Related

Ubuntu Networking :: Button To Enable Wireless Is A Touch Button?

Jan 20, 2010

So I have a intel wifi link 5100 , the drivers should work BUT iwconfig doesn't show my card ..

However doing a ' sudo lshw -C network ' command , it DOES show my wireless card is recognised but not enabled and here is where the problems start ..

I have a touch button on my laptop to enable/dissable it And when I touch it in Ubuntu it doesn't light up like in W7

How can I enable it :s? I really want to use ubuntu !

View 9 Replies View Related

Ubuntu Networking :: B43 Inactive When Computer Shut Down And Restarted

Feb 22, 2011

I have v 10.10 and I had to hook up with ethernet cord to download and activate both broadcom b43 and sta drivers. Once they were both downloaded and activated my wireless worked fine. (Also I have an hp mini 210-1000 if that helps.) After unplugging my laptop and using it, if it dies or if things are running really funky and it seems like it could use a restart, or on one of the many occasions where I am not going to be using it for a few days and just shut it down, as soon as I start it back up.

I find that sta driver still says activated under system - admin - additional drivers, however the b43 now says inactive, and my wireless wont connect to any router, even though it can detect them, until I connect with the ethernet cord and redo the whole driver activation for both, and then restart. This happens every time, and although I don't often take my laptop out of my room, my router is away from my desk, so this is a major inconvenience when i have work to do, or if I were to ever take it out somewhere with me.

View 3 Replies View Related

Fedora Networking :: WLAN Card Goes Inactive

Mar 5, 2009

I have been using FC10, it works well with wlan for sometime and goes inactive after some time and hence network goes unavailable. Even after few attempts to reconnect doesn't help. Rebooting helps in bringing it back temporarily.

View 7 Replies View Related

Fedora Networking :: Eth0 Says Inactive On F10 Reboot

Apr 1, 2009

I just installed Fedora 10. I entered my static network info in Network Configuration. When rebooting, the eth0 says Inactive. I've read many articles about this problem on earlier versions and tried many of the suggestion, but have not found a definite way of solving this. Is there a better way or a workaround to get this machine on the network?

View 6 Replies View Related

Networking :: Closing Inactive Alive Ssh Connections

Oct 25, 2010

I had this problem today while I was logged on my server many a times there was power interruption and my connection would break.Each time a new connection was formed I could see the old ones still active is there a way I could close those connections which are still open when I had logged in.I tried restarting ssh daemon but that did not helped.I use Ubuntu 10.04

View 2 Replies View Related

Networking :: Eth0,eth01, All Connections Always Remain Inactive

Feb 10, 2010

i have just installed f12, recently i was facing a problem of a package named rp-pppoe missing,, but then i installed it by using rpm command,..but now still im not able connect to internet.. as im using adsl connection with modem connected via RJ45,,. im trying to create new xdsl connection by manually putting IP,subnetmask,gateway, dns1,dns2... but still the connection always remian inactive...and i couldn't find any way to activate it...

View 2 Replies View Related

CentOS 5 Networking :: Network Become Inactive When Restart Cent OS?

Jul 15, 2011

My network become inactive but on GUI show that network active. When i ping out the network, is response times out. I need inactive the network and active back but sometime also fail reactive it. What main problem. CentOS running on vmware

View 1 Replies View Related

Fedora Networking :: No Internet Connectivity - Status Inactive PAN0

Mar 3, 2009

I'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.

Here is what I did so far:
Did an ifconfig command and I have the following:
pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95
inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)

When I go to the Network Configuration Panel I see the following:
Status: Device: Nickname: Type:
Inactive pan0 pan0 Ethernet

Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.

View 14 Replies View Related

CentOS 5 Networking :: 5.4 Freezes When Clicking On Inactive Linked Folder

Apr 16, 2010

i encountered the following:

situation:

1 server with centos 5.4 running 1 client with centos 5.4 - gnome running thin ethernet network

on my client desktop i have a link to a shared folder on the server. this works fine.

to the problem: after working with this (using the link and seeing it working) i shutted down the server from my client (in a terminal screen, using ssh) the terminal screen signalled the server going down and the connection ended. the linked folder on the client desktop changed its icon fine.

after that i clicked on the changed icon (of the link that was not a working link any more) and the client machine froze.... no reaction any more. i could only end the session by >ctrl-alt-f#< , log in and shutdown.

Q: is it normal Centos is that angry when you click such a link?

View 3 Replies View Related

Ubuntu Networking :: [10.10] Wireless Becomes Inactive - Dell Inspiron 6400 / Failed To Initiate AP Scan?

Dec 18, 2010

I've got a wireless problem on my laptop (dell inspiron 6400).I don't know when exactly and why, but every time I watch a video on ..... or allostreaming, after a while (a few minutes), my wireless disconnect and it's impossible to get back any connexion. The only solution I have is to reboot my computer.

the command : iwconfig shows :
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11abg ESSID:"Callalc"
code....
Dec 18 18:33:18 yannick-laptop wpa_supplicant[1390]: Failed to initiate AP scan.

View 1 Replies View Related

Fedora Networking :: Configure The Wireless - Active/inactive Buttons Are Disable

Jun 14, 2009

I am running fedora from the USB. My computer is Dell - inspirion. I tried to configure the wireless according to the instructions. I added new a device ...

I see the new device but it's written inactive. The Active/inactive buttons are disable (or not seen at all). How can i resolve/Active the wireless?

View 8 Replies View Related

Fedora Networking :: Flaky Internet Connectivity - Network Inactive In NM Panel

May 28, 2011

I just installed F15 on a laptop that previous had F12 working well. During install, it finds my wireless card and seems to set it up fine. The full install ran with the wireless active without any problem that I could see. Now, when I start up, I see Network Manager tells me that the wlan is active, but it doesn't show my specific network. If I click on the NM tray icon and open up the panel, my network is shown but it is not "active".

I can double click on it and it will become active - shows the little globe next to the antenna. This works fine for about 2 web pages worth and then FireFox 4 stops being able to find web pages. If I go back to the panel, double click on my wireless network (which looks like it is active already), and reactivate it, I can get the page I was looking for in FireFox, but within a couple of minutes it will stop.

Likewise with yum, while I'm installing software, I'll occasionally get errors like this:
[URL]: [Errno 14] curl#6 - "Couldn't resolve host"
If I reactivate my wireless network in the NM panel, it continues fine. Other computers/phones connected to this network seem to work fine. Is NM known to be problematic in F15?

View 14 Replies View Related

Ubuntu :: No Close Button Minimize And Maximize Button?

Apr 19, 2011

i m using ubuntu 10 .10.for 2 weeks it was working fine yesterday onwards it changed.tried all themes but still i cant drag the window to make it small in sizethere is no close button minimize and maximize button in all the application and files[URL]

View 1 Replies View Related

Ubuntu :: Priority To Hard Disk Containing Kubuntu Login To Kubuntu But Can't Get In To Windows7?

Sep 15, 2010

I have two OS in my system. Windows& and Kubuntu. Both are in separate hard disks. I was using both. In between i have upgraded my system. now when i am giving priority to hard disk containing kubuntu, i can login to kubuntu, but cant get in to windows7. i have upgraded grub but not working. when i am giving priority to hard disk containig windows7 it enters and work properly. but not working in the previous.

View 1 Replies View Related

Ubuntu :: XP / Kubuntu - If Delete Kubuntu What's Happen To My Boot Cycle

Mar 31, 2010

XP Pro SP3
Ubuntu 9.10
Kubuntu 9.10

Tri-booting. They were installed in the order I listed above. I ran into a few bugs with Kubuntu, so I no longer want to use it. I want to use GParted on a LiveCD to format Kubuntu and expand my Ubuntu home partition to sit on top of Kubuntu's space right now. If I nuke Kubuntu, will Grub still exist with my Ubuntu/XP entries to boot?

View 4 Replies View Related

Debian Configuration :: Disable Middle Mouse Button Paste Action-not The Whole Button?

Apr 1, 2011

While searching the net I found how to complete disable the functionality of the middle mouse button but I need this button for many other uses.I want to disable only it's paste action.

View 2 Replies View Related

General :: Multi-button Mouse On X11: How To Configure Several Buttons To Act As The Middle Button

Mar 17, 2011

I know how to make another button act as the middle button but how can I map several mouse buttons to the middle button? xmodmap complains if I repeat button numbers in the pointer option.

View 2 Replies View Related

Ubuntu Networking :: Wireless Button Cannot On

Sep 3, 2010

i am using laptop hp compaq cq40. why wireless button if press cannot on. i have tried the wireless troubleshooting in ubuntu.

View 3 Replies View Related

Ubuntu :: Point To Kubuntu CD Instead Of Kubuntu Repository?

Mar 7, 2011

I would like to apply KDE on my Kubuntu because the current one blew up. But each time I to sudo get-apt it seems to be fetching from the cloud. Is there a way I can make it to read from my local Kubuntu CD? I have both Ubuntu 10.04 LTS and Kubuntu Live CDs.

I believe the local disk read should be faster to translate than to bite the bytes across thousands of miles over the wire right?

View 1 Replies View Related

Ubuntu Networking :: Can't Get The Wifi Button To Turn On?

Feb 22, 2010

i have an hp zv 6000 laptop. I cant get the wifi button to turn on. It sees the card has drivers loaded but because the quicklaunch will not function i cant get the thing to turn on. is there a way to force the hardware on by bypassing the buttons. Some of the button do work though. the music button brings up the media player.

My system is a dual boot with xp. buttons work with xp. wlan on in bios. if windows is not running i cant make the button work. just so you know i am kinda a noob at ubuntu. used to run redhat back in compsci days. been a while.

[Code]...

View 3 Replies View Related

Ubuntu Networking :: What Export Button Is Ment To Be Used For?

Apr 26, 2010

The application works rather well for most part, it generates the dh, ta, certs and config for the server and i can activate the VPN connection just as planed and clients can connect to the port so that works as well.The problem comes when i try to use the "Export" button to generate a config for the client and a key (cert) for the user.If i'm not mistaken that's what the export button is ment to be used for.

View 3 Replies View Related

Ubuntu :: Can't Login - Keyboard Inactive?

Jul 16, 2011

I recently upgraded to Ubuntu 11.04. Login worked fine at first. After a recent update, I can no longer login. The Keyboard is inactive on the home screen. Mouse is active and I can enter through other non-admin accounts with no password required for their login.Keyboard works fine once I can get past the login. Doesn't work on normal, classic or safe mode. Keyboard driver (system-wide)set to Dell Inspiron 6xxx/8xxx.

View 2 Replies View Related

Ubuntu Networking :: Kubuntu Can't Set Up Any Network Printers

Feb 15, 2010

I've had Kubuntu 9.10 32-bit running on my laptop since it came out, but in the past month all its networked printers have disappeared from the configuration, and I can't set up any more. I've been through the forums again and again and cannot fix it. I've installed and reinstalled lots of packages related to CUPS but it doesn't seem to make a difference.I'm not sure what has happened, but I have lots of clues. Since I'm reaching the limit of my know-how here, I'll just list all the clues.

I'm pretty sure the problem is in my Kubuntu laptop, because in my SOHO setup I also have a Kubuntu 9.10 desktop (this time 64 bit) connected to a printer, and I have successfully printed through that from both a Windows XP laptop and a Xubuntu 9.10 box.On the Xubuntu 9.10 box, I just asked for the GUI print configurator and it automatically detected the network printer. No muss no fuss.But on the Kubuntu laptop, when I go into the print configurator, here's what happens:

- it shows two options, "new printer" and "server settings" (image a.png)
- entering "server settings" everything is greyed out and unchangeable (image b.png)
- entering "new printer" shows only one option for a connection, "other" (image c.png)
- after entering the address of a printer i know works (image d.png) the configurator has detected the printer (image e.png)
- but then attempting to move forward it crashes with no explanation.

Running the non-kubuntu version of the configurator GUI provides a bit more information before it fails. When I try to access the desktop with the printer attached it wants a username and password. (which wasn't necessary for the two client machines who successfully printed.) And at the end of the process there is an error: "there was an error during the CUPS operation: client-error-forbidden".

Two more clues:
- when I try to go with my browser to localhost:631 the browser can't establish a connection
- but I can see the cups page on the printer's host machine at 192.168.0.104:631 no problem.

View 2 Replies View Related

Ubuntu Networking :: Stopping The Kubuntu To Setup An IP?

Mar 25, 2010

how do I stop my Kubuntu to set up an IP ? I tried this:

sudo ifconfig eth0 192.168.0.1

but in the following minutes it changes it!how do I stop it?

View 6 Replies View Related

Ubuntu Networking :: Neatx Or FreeNX For Kubuntu 10.04??

Jun 21, 2010

According to Ubuntu documentation, Neatx should be installed on Lucid but there is no support for this on the Neatx homepage. In fact, the Neatx webpage says they are not doing releases because of bugs. With that said will FreeNx work on Lucid?

View 1 Replies View Related

Ubuntu Networking :: Getting Wireless Setup In Kubuntu

Nov 23, 2010

I am a new Linux user and Maverick Meerkat happens to be my first Linux system i installed. Setting up wireless was pretty easy in GNOME as it displayed my wireless system and i just entered the WEP key and i was all set.I decided to install KDE. After i installed KDE i wanted to setup internet There. However the KNetwork manager is not as friendly as Network Manager. It does detect my wireless router, but after i enter the WEP key it does not get connected.

It was asking me all sorts of question like SSID which i did not use in GNOME at all and neither do i know that information.I tried wcid network manager but removing network-manager and knetwork manager.wcid did get connected to my wireless but it was unable to acquire my IP address. (please do note that both k-network manager and wcid network manager work well with wired internet connection). Could you please help me setup internet in KDE? the truth is internet responds better in KDE than GNOME for my computer somehow.

View 1 Replies View Related

Ubuntu Networking :: Finding The Drivers For Using Kubuntu?

Feb 3, 2011

I have ubuntu installed on my laptop which works fine. It has a pcmcia wifi card. When I tried to run the kubuntu live cd it couldn't find the card. As the drivers will be the same how do I find the drivers to allow me to use kubuntu? I plan to make a live usb which I'll add the drivers to so that it'll work each time I plug in. Alternatively if I can find the drivers then I'll just enable them each time via the cd.

View 5 Replies View Related

Ubuntu Networking :: KUbuntu 10.10 Does Not Recognize Wireless

Feb 8, 2011

I have recently bought a Toshiba Portege R700-15Q and installed kubuntu 10.04. A similar problem happens with kubuntu 10.10 booted from USB stick. I am a long-time linux user but not experienced with fixing problems. The wireless network is not enabled and it appears that linux does not know that there is a wireless capibility. This is both with and without an ethernet connection at boot. The wireless light on the computer is lit up, but when I go to Manage Connections the wireless and mobile broadband tabs are greyed out so can't be accessed.

iwconfig gives "no wireless extensions" for lo, eth0 and pan0.
lspci returns "Network controller: Broadcom Cooperation BCM4313 802.11b/g LP-PHY (rev 01)"
lshw -C network returns "*-network UNCLAIMED", along with a block of other information which does not indicate a problem to me.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved