I am running "Lucid Lynx" (10.04) 64 bit. My "Network Connections" has disappeared from the 'System -> Preferences' menu. I also had a network connections status/configure thing on the panel. With it, I could disable/enable and configure my network connections. It appears on a fresh install of 10.04, but it is no longer available. I've been running 10.04 for a number of months but it recently has disappeared.
View 3 RepliesI just installed Debian and am getting a problem where I can't open the list of network connections. I can use the network manager applet to connect to wireless networks, but I cannot access the network connections list from there either (right click "edit connections)
I'm not incredibly knowledgeable with Linux, but I tried a few simple things I could think of like reinstalling the packages, or restarting the interfaces. (ifdown/up wlan0)
It's strange, because when I click "network connections," I see it show up for a second on the bottom panel, I get some rotating mouse icon while I wait a few seconds and then if goes away. Is there some kind of logfile that could help me identify the problem?
Using Debian 6 on eeePC1000HEB with Ath9k (i think) wireless card. Net Interface: wlan0
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedDoes anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedI'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
I had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View RelatedI have my box setup as a router/NAT with two different network cards. One for external connection(connected to the Cable Modem) one for internal connection(used for internal DHCP). It works perfectly when I manually activate the two interfaces after booting(both interfaces always show up as inactive after booting), then the DHCP server and firewall. I am confused, however, by which program has control of these interfaces.
First, there is the Network Configuration (System->Administration->Network), which is where I manually start the interfaces after rebooting. Both interfaces are set to "Activate when computer starts" in here.
Second, Network Device control(System->Administration->Network Device Control), which looks to be almost the same thing as the above.
Third, the NetworkManager applet(on the top bar) - both devices show up as unmanaged when I left click on this, but if I set "Controlled by Network Manager" in the "Network configuration" window(number one above), It still does not work. Can I get rid of two of these programs, or is there some way to edit the startup scripts to start my ethernet cards before the dhcp server/firewall(which is shorewall BTW)?
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?
View 8 Replies View RelatedI remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
View 2 Replies View RelatedFirst a warning that I'm so clueless it hurts. Initially I entered the Linux world as a solution to my blue screening Alienware Aurora desktop (which later fried anyway ironically enough). I decided to give up on Windows for everyday use cause you can't strangle an operating system. My first and there after Linux experiences have been fantastic. Internet works without prompting through various distributions of Ubuntu, Mint, and KDE with the exception of enlightenment.
But now I come to openSUSE 11.4 and as my title suggests I'm having a hard time connecting to the internet. I've got a wireless card and router and all that jazz but I can't even select the options for wired or wireless connections under Network Connections in the Network Management Settings. Everything is greyed out except for VPN. I even have the desktop wired to the router and it still is not giving me any indication that it will connect.
I'm wary of trying to enter ip addresses and things of the like because I honestly don't know what i'm doing here.
My router is a Netgear N150 Wireless WNR1000 and in the Kinfocenter under Device Viewer I found my wireless card to be a RaLink RT2561/RT61 802.11 g PCI and my wired device thingy to be an Intel 82540EM Gigabit Ethernet Controller.
I was setting up my internet connection in Ubuntu 10.04, while I had to reboot.After the reboot Network icon in the top-right corner was disappeared! Really, I can't understand why.I tried to open synaptic, totally remove network-manager and network-manager-gnome and then I tried to reinstall them. After the reboot, still, there wasn't Network icon.I tried to press ALT+F2 and insert "nm-applet --sm-disable" but nothing happends.
I tried to right-click on upper-toolbar and then to go on "add panel" but I can't find out network manager (or similar).If I write on my terminal "sudo nm-applet" it says that there's already an nm-applet running but where? And how can I open it?On System/Administration/Network Tools (I don't know if this is the exactly translation...) all network parameters are 0 such us 0.0.0.0 on IPs. Of course internet connection does not work!How can I restore Network Manager?
I have just installed Ubuntu 10.10 64bit on my laptop Toshiba Satellite A665-S6065 and I can connect to wired network but I can not connect to wireless network "Network Connections disconnected". Im following this post http://ubuntuforums.org/showthread.php?p=6183681
1. Machine Brand and Model (PC/Laptop): Toshiba Satellite A665-S6065
2. Wireless Brand, Model and Wireless Chipset:
Code:
lspci
Output:
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
[Code]...
Im using ubuntu 9.04. The network manager (at least thats what i think its called, the thing managing network connections that usually resides on the panel in the upper right corner where you can check available connections, log in to VPN etc) has completely disappeared, i dont know what i have upgraded, i usually just click and download all upgrades..Ive tried to re-add it to the panel but i cant even find it there.
View 1 Replies View RelatedMy Sound and Network Applets have disappeared. Probably with help from a seven year old. When I right click the panel to "Add to Panel" neither Sound/Volume nor the Network Applet are available in the list. So how do I fix it?
View 7 Replies View RelatedI am using Ubuntu 10.04 Lucid Lynx 32 bit version alongside my Windows OS.I wanted to enable my DHCP configuration in my modem.So I did what was to be done from Windows and when I switched to Linux, I found DHCP enabled connection not working in Linux and also the network manager icon had vanished from the systray.I have now switched off DHCP and wanted to revert back to my original settings but still no network manager icon is there.
View 2 Replies View RelatedFor some reason, I can't get network-manager to appear on the task bar so that I can edit the connections. Also, network manager doesn't appear in system/prefs menu. if I try typing at the terminal 'sudo nm-applet" it says "An instance of nm-applet is already running. ** (nm-applet:9074): WARNING **: <WARN> constructor(): Couldn't initialize the D-Bus manager." If I inspect the system | preferences | startup apps , network manager is selected with the command "nm-applet --sm-disable".
I can see "network-manager" shown in /etc/inid.d but "sudo network-manager" gives "command not found". Anyone know what I have to do to get it working ? Uninstalling and re-installing hasn't worked. I have tried installing Wicd and that shows Lan & wireless connections ok but it *doesn't show my usb data-dongle* which I've just got working using the very useful application UsbModem_Switch by Draisberghof .
So the workaround for me is to call that connection manually ( if I need to use the usb data-card dongle ) with the command "sudo usb_modeswitch -W -c /etc/usb_modeswitch.d/0471:1210". However, if I can get the network-manager applet thing to show up and use that it would be easier. Or is there a better alternative to Wicd which can handle usb data-card modem connections ?
Every time I booted in 9.10, Python requested a password. I didn't plan to do any programming very soon (I'm new to Linux, although I know Unix) because I'm just learning the shell, etc, so I decided to uninstall Python through the Package Manager. I selected all of the installed Python modules and when I clicked "Apply" I was informed that there was one module (Python minimum something) that would seriously effect the whole system, so I unchecked that module and then ran the uninstall. When it completed, Firefox was gone, the two music players I had installed where gone, I couldn't log out and when I try to reboot I get a message "Ubuntu is running in low-graphics mode" and I go through several other menus, but I still can't get the system to boot.I assume a reinstall is in order, but should I "clean up" any of the remaining Linux modules/partition? And what's the best way to do that?
View 1 Replies View RelatedAll of a sudden all my drop-down menus in the upper left dissapeared (things like system, applications, bookmarks, etc.) though buttons/shortcuts and clock, etc. are still there though oddly spaced out.
View 1 Replies View RelatedI don't know what I did, or maybe it was some update. I'm running Kubuntu Maverick 64-bit. Kmix in system tray disappeared. Sometimes it shows up after some long time, but I haven't seen it for the last month. Kmix process still runs, and it takes one entire thread of my Intel i3 processor. Killing kmix and restarting it does not change anything. Sound applications work as expected, but I cannot change volume. They work well also when I kill kmix. When I invoke kmix from xterm, I get the following messages:
Code:
QMetaObject::invokeMethod: No such method KMixApp::
loadCommandLineOptionsForNewInstance()
Bus::open: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
kmix(12181) Mixer::setGlobalMaster: Mixer::setGlobalMaster() card= "PulseAudio::Playback_Devices:1" control= "alsa_output.pci-0000_00_1b.0.analog-stereo"
kmix(12181) MixerToolBox::initMixer: Looking for mixers with the : "PulseAudio" driver
kmix(12181) Mixer_PULSE::Mixer_PULSE: Probing for PulseAudio...
<unknown program name>(12180)/: Communication problem with "kmix" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." ".
At the same time, phonom complains that some devices have disappeared (they do not show up in other places anymore):
Internal Audio Digital Stereo (IEC 95)
Internal Audio Digital Stereo (HDMI)
Internal Audio Analog Surround 5.1
What should I do to get my mixer back?
I am running Ubuntu 9.04 as a partition with windows 7 on a acer aspire 5742, I would like to connect to the internet in Ubuntu, wirelessly, but I am unable to turn my wireless on in Ubuntu, and network manager says "no network connections available". I have the following network adapters:
Atheros AR5B97 Wireless Network Adapter
Broadcom NetLink (TM) Gigabit Ethernet
Microsoft Virtual WiFi Miniport Adapter
When the laptop boots I get a very brief message to say "wireless network available, click on icon". But it disappears in a second. I'm not clear whether my WL-140 card is in device wlan0 or wmaster0. Here's what lshw -C network says...
*-network
description: Wireless interface
product: ISL3886 [Prism Javelin/Prism Xbow]
vendor: Intersil Corporation
physical id: 2
bus info: pci@0000:06:00.0
logical name: wmaster0
version: 01
serial: 00:0c:f6:14:a4:35
width: 32 bits
clock: 33MHz .....
i am too new for linux..I installed Ubuntu 10.10 desktop edition from windows.When i am trying to configure network connections i am facing problems
Code:
udo pppoeconf
no working ethernet card could be found.If you do have an interface card which was not autodetected so far,you probably wish to load the driver manually using the modconf utility.Run modconf now?
/usr/sbin/pppoeconf: 523: modconf: not found Ifconfig
[Code]...
I have linpus linux lite on my new aspire one netbook.I bought it three months ago and before some days the network icon has disappeared.I tried to run it from the settings, but nothing happened.I also saw that the net files are all deleted.
View 1 Replies View RelatedThe network manager applet has disappeared from my top panel so now I cannot see what local wireless networks are available. I just came from the library and was unable to connect to their wi-fi because the computer wasn't trying to detect it. All I have is a network connections applet that seems fairly useless as it just gives me info on networks I've used in the past and not on any currently available networks.How do I get this Network Manager back and functioning?
View 1 Replies View RelatedAfter rebooting, I found that the server couldn't see the network. The machine has dual gigabit ethernet (eth0 and eth1). eth0 is connected to the internet, but disappeared. ifconfig used to show eth0, eth1, and lo, but now only shows eth1 and lo. If I boot into rescue mode I can get internet and ifconfig returns eth0 and lo. Any ideas on how to fix this?
I apologize in advance if I ask any noob questions. I'm not a very experienced Linux user.
Yesterday while trying (unsuccessfully) to get a new Bluetooth dongle set up I lost the network manager applet. When I rebooted, after giving up on Bluetooth in Ubuntu, I had no way of connecting to my wireless network. In command line (iwconfig & iwlist scan) I was able to see the wireless router. So the wireless card is working correctly. How do I reinstall the network manager applet? Oh even when use a wired connection to the router there is no connection.
View 3 Replies View Related