Ubuntu Servers :: Eth0 Disappeared / No Network Connection - Resolve That?
Aug 8, 2010
After rebooting, I found that the server couldn't see the network. The machine has dual gigabit ethernet (eth0 and eth1). eth0 is connected to the internet, but disappeared. ifconfig used to show eth0, eth1, and lo, but now only shows eth1 and lo. If I boot into rescue mode I can get internet and ifconfig returns eth0 and lo. Any ideas on how to fix this?
I apologize in advance if I ask any noob questions. I'm not a very experienced Linux user.
View 9 Replies
ADVERTISEMENT
Apr 3, 2011
I'm running 10.04 and my eth0 connection disappeared. If I go into my network tools, I can see the IPv4 connection and test the ping and all. When I go to my network connections, I do not see the eth0 at all. I have not made any serious changes lately and have no clue to what could have caused this. I have tested the cable with my laptop, and it works fine. I have serious reddit browsing that needs to be done!
View 3 Replies
View Related
Jul 25, 2010
Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
View 1 Replies
View Related
Dec 13, 2010
When I log onto my Ubuntu 9.04 boot I am disconnected from the internet, on my windows 7 boot It works just fine, I have attempted disabling networking, power cycling the modem and router, and re-enabling networking, no dice though. hovering over the connection icon tells me that there is no network connection.
Opening the edit connections window tells me that there a wired connection called Auto eth0 that is set to never, and that is all that I can find. I hunted for other forums on this and found a few but none with a successful resolution.
View 1 Replies
View Related
Apr 22, 2011
im trying to setup eth0 with subdevice eth0.0 and eth0.99 to come up at boot
eth0 is dhcp clint
eth0:0 is static ip
eth0.99 is 802.1q vlan interface
/etc/network/interfaces
Code:
auto lo
[Code]....
View 1 Replies
View Related
Sep 25, 2010
I have recently upgraded the ubuntu desktop edition from 8.04 to 10.04. after upgrading i cannot show my eth0 nic interface in the System > Preferences > Network connections----- wired tab. and i also not getting network indication in the top of the panel beside the date time indication. but i can access network and using internet with that lan card. i cant understad my eth0 is connected or unpluged..
View 3 Replies
View Related
Apr 23, 2011
I'm using 11.3 gnome and cannot fix the eth0 connection. Tried to make it work with connection manager, ifup but both of them did'n make eth0 work. Here are some logs that you might wanna see:
lsmod:
Module Size Used by nls_utf8 1165 1 st - Pastebin.com
ifconfig:
eth0 Link encap:Ethernet HWaddr 1C:6F:65:47:03:16 UP BROADCAS - Pastebin.com
ifdown eth0:
[Code]....
I have TP-LINK router that sends wireless signal through the house which I'm using on my laptop's Ubuntu to connect on the internet, also I can connect with Ubuntu from laptop via the same cable that I'm trying to use on my desktop, so the router and cable are working. Also on my dekstop I've installed Windows 7 and can't connect from there either. The computer is new so i doubt that there is something wrong with its hardware. It all started when my connection disappeared. My ISP advised me to reset my router by plugging out the power cable and plugging it back in after 5min, and so I did. After that I could connect only from laptop. Tried to reinstall suse, to install ubuntu, but nothing worked. When I installed suse on my friend's computer, the only thing that I had to do is to open YaST and change the Network setup method from ifup to the NetworkManager, and also insert the MAC adress in the connection's properties. Tried that on my computer, but also didn't work.
View 2 Replies
View Related
Dec 1, 2010
I've got access to my LAN and the Internet via my wired ethernet connection. I'd like to share that access with my iPod Touch (device shouldn't really matter) via an Ad-hoc wi-fi network.
This tutorial in the docs seems to describe the right setup but is very out of date (7.04). Instead I found this tutorial and followed it to create the Ad-hoc wireless network. I was able to connect my touch to the resulting ad-hoc network without a problem, but I didn't have LAN/Internet access.What's the next step to get the clients on the ad-hoc network out to the Internet?I found this page in the docs that says I'd need to install dnsmasq-base and uninstalling dnsmasq. I checked and dnsmasq-base is already installed but dnsmasq is not. I do have dnsmasq in /usr/sbin but the package description makes it sound like this should come with dnsmasq. Is the page out of date? Will uninstalling dnsmasq cause other problems?
View 9 Replies
View Related
Mar 3, 2010
I have my ubuntu box hard wired into my network. It all works fine, until I reboot my ubuntu box. After reboot, it can no longer see the network. I have it set up with a static ip. Not sure that I set it up completely correctly but it works fine...when working.. To fix the problem, I enter terminal: ifup eth0 That fixes all know problems until next reboot. What do I need to do so that it will remember settings and automatically be hooked into the network at power up?
View 3 Replies
View Related
Jun 7, 2010
I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.
View 7 Replies
View Related
Oct 2, 2010
I recently setup a new SUSE box for the purposes of acting as an ftp/sftp server. It's currently setup to run ProFTPD 1.3.3.rc3 and mod_sftp/0.9.7. The server has two internal network interfaces eth0 and eth1. eth0 is purely for internal use to accept ftp and ssh. eth1 is outward facing and receives connections from the WAN via SFTP over port 22. The problem I am facing is that after half hour to an hour eth1 stops accepting connections whenever there is no SSH connection present on eth0. I can't figure out why this is happening.
ProFTPD is setup as follows: SocketBindTight directive is on, default server and port are commented out.
[code]...
When the external interface is unreachable the proftpd and proftpd-sftp logs show no record of any connection attempt. I have noticed however if I leave eth0 down eth1 stays contactable without problem. Can anyone give me some pointers on what I can check to find out why this may be happening.
View 2 Replies
View Related
Mar 8, 2010
If I uncheck and recheck "Enable Networking" in the Network Manager Applet 0.7.996 I would expect the wired network to disconnect (which it does) and reconnect (which it does NOT). So I tried sudo ifdown eth0 and got
Quote:
Ignoring unknown interface eth0=eth0.
ifconfig tells me
Quote:
eth0 Link encap:Ethernet HWaddr 00:25:64:e8:18:2c
inet addr:192.168.0.112 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:64ff:fee8:182c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
so I am at a loss. How do I stop and restart the network interface short of rebooting the machine?
View 9 Replies
View Related
Jan 16, 2010
I did an weekly update through aptitude, and it asked for a restart.after the restart, there was no ethernet available. ifconfig brought absolutely nothing, as though the card was no longer present This is on an old dell tower. How do I find out what happened. I don't know how to find out what was in the update.
View 8 Replies
View Related
Apr 29, 2011
When I set my DNS servers via Yast>Network Devices>Network Settings>Hostname DNS it accepts the addresses, but then when I check then the next time they are faded out. I set them again, but same results.
View 6 Replies
View Related
Mar 9, 2010
Ubuntu server 9.10. I have configured my network connection using GUI Network connection. It worked fine with DHCP, but when I assigned a fixed IP eth0 has disappeared. How can I restore it?
View 3 Replies
View Related
May 4, 2010
I was struggling frantically this morning for about 5 minutes after I booted up my computer, and wondering why it couldn't connect to the internet. After I figured out that the automatic wired network "Auto eth0" was gone from the network manager, it was easy to manually add it back. But why did it disappear in the first place?
View 3 Replies
View Related
Aug 4, 2011
I want to use Unity (Ubuntu 11.04). It's not anymore in the list of sessions at the login page.
I've tried to run 'unity' from the command line like was suggested in another post resulting in failure (see below).
In the Ubuntu Software it's installed. code...
View 9 Replies
View Related
Jul 6, 2011
I installed a simple VPN pptp. Works fine to connect to the linux server. However I would like to connect my other linux-server and (more important) my old Novell 6.0 server. Anyone have an idear what I need to change?
View 3 Replies
View Related
Sep 11, 2010
I set up the web/backup server for our department and I'm having some major issues. Firstly, the server seems to be dropping the network connection periodically. I checked all of the logs and it appeared to be an IP6 issue as the only message that seemed to correlate with it was "eth0: no IPv6 routers present" in syslog. I added "ipv6.disable=1" to my boot options in menu.lst and this seemed to take care of the problem. However, I woke up this morning and the server was back down.
This didn't seem to take care of the problem. It seems to occur when my automatic backup scripts go through. I have several BASH backup scripts that use rysnc over SSH to backup several computers to the server and the server to my desktop at home. I was able to trigger the problem a couple of times running the backup script this morning. Now, I'm getting the following error when running the script, instead of losing the network connection:
Code:
Sep 11 10:22:40 chemistry kernel: [ 396.892699] BUG: unable to handle kernel NULL pointer dereference at 0000000000000118
Sep 11 10:22:40 chemistry kernel: [ 396.892715] IP: [<ffffffff811426c0>] __dentry_open+0x240/0x370
Sep 11 10:22:40 chemistry kernel: [ 396.892728] PGD 1113d5067 PUD 11458c067 PMD 0
Sep 11 10:22:40 chemistry kernel: [ 396.892737] Oops: 0000 [#1] SMP
Sep 11 10:22:40 chemistry kernel: [ 396.892743] last sysfs file: /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
Sep 11 10:22:40 chemistry kernel: [ 396.892750] CPU 1 .....
I tried booting with a previous kernel to see if that was the problem and I'm still getting this error. I've searched through all of the logs that I could think of to try to track down any software based problems and I just don't see anything. In the past, whenever I've run into such serious with a Linux box that popped up out of nowhere, it's always been a hardware failure. I've currently disabled all of the backup scripts and I'm going to see if it lasts through the weekend.
View 2 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Feb 19, 2010
I had no problems using my dell mini with ubuntu wireless UNTIL i did a direct connect into my home network to download some updates. Now the wireless connection option has disappeared and only shows a wired connection in "network". Does anyone know how to get it changed back. Terminal no longer shows an eth1 but lists eth0 as the wired connection on ifconfig.
View 1 Replies
View Related
Aug 24, 2010
Seems like i have an issue, and the applet vanished even though after some attemps typing to reintate it with: ALT F2. nm-applet I was advised to insert the gui panel but seems i do not have on version 10.04
View 6 Replies
View Related
Oct 29, 2010
Its disappeared before and its gone again> Last time this happened there was a root input which solved the problem but did not take a note of it and cannot find it through google this time Basically left my Linux Acer Aspire One and when I returned to it, connection manager had disappeared and cannot get it back.
View 4 Replies
View Related
Feb 14, 2010
Last night while setting up wired & wireless connection in openSuse 11.2 Gnome version via YAST's ifup, I got wireless but lost wired connection (interface eth0). Dmesg shows that eth0 became eth1. I cannot get eth0 back. Is there any way to remedy this situation, eg. get info from the Ubuntu partition in my triple-boot laptop, without having to re-install openSUSE?
View 3 Replies
View Related
Dec 24, 2010
I'm new to this forum site and I was wondering how can I bridge a network between the eth0 and wlan0 connections?my eth0 NIC is a RealTek RTL8111B 10/100/1000 Ethernet Card (OnBoard) and my wlan0 NIC is a RealTek RTL8187B 802.11b/g WiFi USB Adapter Card.Are there any utilities, such as bridge-utils that I can use, except for Firestarter since Firestarter states that the eth0 connection is not established, or do I right-click on the network icon and select Edit Connections and go to Auto eth0 and under the IPv4 Address setting and select Shared to other computers and run a live connection there?The main reason is that I need an Internet connection for my Xbox 360, which is connected to my Linksys WRT54G 802.11b/g Wireless Router, that has DD-WRT firmware installed and 4 WiFi hotspots for any wireless device, such as my PSP, DS, DS Lite, Wii, Laptop(s), my brother's PC (needs a WiFi card), and my dad's PC (needs either a WiFi card or an Internet connection from my brother's computer to my dad's PC)
Here are my Computer Specs:
ECS nForce6m-a Motherboard
2GB DDR-800 PC6400 Memory
[code]....
View 6 Replies
View Related
Oct 11, 2010
Our laptop all of a sudden will not connect with our usual wifi network connection which has disappeared & now mysteriously shows dd-wrt . It shows an internet connection has been establihed with dd-wrt but does not work.
View 1 Replies
View Related
Aug 25, 2010
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behavior.I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc.I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'.I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working?I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick?
View 6 Replies
View Related
Oct 15, 2010
I have two connections for my PC, my Ethernet which is on the corporate network and my smart phone on 'usb0'. Both have full internet access.I want to stop my PC from connecting to the internet over the Eth0 while still connecting to internal servers then just have internet over usb0.If I go to the settings of 'Auth Ethernet' in the tray area, under IPv4 there is the routings section - I've tried enabling "use this connection only for resources on its network" but it doesnt work.
View 3 Replies
View Related
Apr 23, 2011
I'm getting rather fed up with this Network Manager applet on Ubuntu and its seemingly erratic behaviour. I often use my laptop for things like dhcp server to do pxe boot on other machines for netboot installs and other stuff. Often I have to set static address on eth0 etc. I know how to set a static address for eth0 by editing /etc/network/interfaces and all that good stuff, but when I click on the Network Manager applet, it says 'Wired Network - not managed'. I may have deleted it for some reason, but why does it no longer appear, even though eth0 is working? I've also found in the past that changes to interfaces in the Network Manager, such as giving eth0 a static address, do not seem to stick? It seems the only thing this applet is useful for is connecting to a wireless network.....and only with dhcp !!
View 1 Replies
View Related
Jul 23, 2011
just wondering if I could get a hand with bridging my eth0 and wlan0 connection. I'm using Ubuntu 11.04 if that helps at all.
View 1 Replies
View Related
