Ubuntu :: Nautilus Show Disk Full - Analyzer Says 140 GB Free
Dec 21, 2010
I have a problem on my installation of Ubuntu 10.10: it shows 0kb space remaining in nautilus. When I delete files (also out of Trash) it shows there is again space, but within minutes this free space is full again. When I look in Disk Usage Analyzer it says there is 140 GB available and it is impossible that the complete partition of 190 GB is full. But I cannot save or download anything anymore and the system is not very responsive. So it seems to act as if the disk is completely full.
After moving to Lucid Lynx, I've noticed, that when I view Folder Preferences, Nautilus no longer displays the free space available, but instead displays "Free space: Unknown".
In some cases it still appears to show the free space, for example when viewing properties of Home folder, or viewing the properties of a detachable HDD in media-folder (but not when trying to view the properties of any of the folders _on_ that HDD).
Some thing is using up a huge amount of my disk space about 10G and I can not determine what it is. When I look at my disk usage in system monitor it say I have used about 25G and when I scan the directory in disk usage analyzer the entire file system used is 15G.
This weekend, I installed Debian Squeeze on my server. I've formatted all the hard disks to EXT4, and I'm using kernel version 2.6.32-686-bigmem.When I tried to install the program saidar, it surprised me why it does not show my hard drives under 'mountpoint' [URL] <-- Saidar screenshot) as I could when I ran with Debian Lenny with the same kernel, but where the hard drives were formatted in EXT3. My laptop which has Ubuntu 10.04 as OS and the hard drive is formatted in EXT4 can easily show the hard drive in saidar. I also tried to install PHP SysInfo on the Debian computer, but it does not bother to show anything on the hard disks
I tried to check fstab file and I can see that Debian uses UUID to identify the hard drives, but I've tried to change it to something with /dev/sdx, but it did not help either.[URL] (fstab file)
I know that Debian squeeze is very new, but it would be nice if someone could give me a hint what might be wrong, because I am a little tired of all time to use 'du-hs' command To find out how much space is spent on the various drives, since the command is a little slow, since hard disks are well filled.
How do I get Ubuntu's "Disk Usage Analyzer" to show me the hidden files?
It tells me my home dir uses 3GB, but only accounts for 525MB (the results of du -shc *). Can I get it to show me the other files that are using the space?
I have a problem with my partitions being shrunk after VirtualBox PUEL 4.0.2 install. I tried VB OSE, loaded XP Pro and all necessary programs and realized it does not support sharing of folders. I then removed it and installed PUEL with XP Pro and all the same programs. The USB would not work in PUEL so I removed it and installed it as root to see if it would access the USB's. Halfway through the install it hung and gave me a space error.I cannot get the space back from whatever VB did. I deleted the .vdi's and all VM's and reinstalled VB PUEL to see if I could recover it. Nope. Then I tried GPARTED to try and reset whatever is reading the sizes incorrectly.sudo df -Th gives me:
paul@mobile2:/$ sudo df -Th [sudo] password for paul: Filesystem Type Size Used Avail Use% Mounted on
I noticed on a couple of my friend's computers, the baobab with Fedora and Arch Linux was able to delete folders by right clicking on them. The Baobab with Ubuntu does not have that feature. I then looked at then obtained the source code and ran ./configure --help, and saw nothing about enabling that feature.
I've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
I have a server running CentOS 5.3 (Final) Kernel version is:
2.6.18-128.el5 #1 SMP Wed Jan 21 10:44:23 EST 2009 i686 athlon i386 GNU/Linux
The output from df -h is as follows:
Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.5G 3.7G 5.4G 41% / /dev/sda5 4.6G 456M 3.9G 11% /var
[code]....
As you can see, /home claims to be 100% full - but yet there is actually 18Gb free? I seem to recall this could be something to do with running out of inode space?
Is there a way to display and edit the full path of the current directory in nautilus? I am using Ubuntu 10.10 and I think it was possible with an older version.
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
I don't understand disk sizes in Linux. I have a 500GB drive. It's ext4. I have run "tune2fs -m 0" on it to reserve the amount of space reserved for root to 0.
I'm using Ubuntu 10.04 that comes with a Disk Utility. When I run "System->Administration->Disk Utility (palimpsest)" the disk shows up as 500GB (see picture). But when I run df -h it shows up as 459GB. So, I don't understand the discrepancy.
When I run df I get the following:
Question: Why is Disk Utility showing me something different than "df"?
When browsing my external hard disk I noticed that Nautilus' side pane marks directories that contain files as empty. Is this a bug or a misconfiguration on my part?
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
just installed ubuntu natty(11.04) along side my win7 and have learned that ubuntu has its own downloaded nivida drivers(kinda sweet) but now my problem is that i have no way to set a custom resolution like i could b4 in the nivida control panel i have tryed reading about a dozen other forums on how to add new resolutions(with no luck) so can anyone help me and try to guide me thro a step by step on how to change my res to something like 1822x1022(im pretty sure thats what it is on my win7
how to customize nautilus toolbar to show only icons and no text.
For example, currently my nautilus toolbar looks like the attached Screenshot.png I want to remove those "Back" and "Forward" text strings to make it look like the attached Screenshot2.png
find out the total amount of free unused partition space in a hard drive?
reason:
-- when i use fdisk to create a new partition; its hard to tell how much free space is available. -- tried searching the net but found no answers. some suggested using cfdisk. -- i don't have cfdisk installed on the centos 5.3 server. i don't think its bundled in the distro any more.
I installed RawThumbnailer that says ... 'RawThumbnailer is a thumbnailer for RAW files that works with Nautilus' but Nautilus don't show me thumbnail for RAW-files. I have 2.6.35.11-83.fc14.x86_64
