After moving to Lucid Lynx, I've noticed, that when I view Folder Preferences, Nautilus no longer displays the free space available, but instead displays "Free space: Unknown".
In some cases it still appears to show the free space, for example when viewing properties of Home folder, or viewing the properties of a detachable HDD in media-folder (but not when trying to view the properties of any of the folders _on_ that HDD).
I have a problem on my installation of Ubuntu 10.10: it shows 0kb space remaining in nautilus. When I delete files (also out of Trash) it shows there is again space, but within minutes this free space is full again. When I look in Disk Usage Analyzer it says there is 140 GB available and it is impossible that the complete partition of 190 GB is full. But I cannot save or download anything anymore and the system is not very responsive. So it seems to act as if the disk is completely full.
View 1 Replies View RelatedThis weekend, I installed Debian Squeeze on my server. I've formatted all the hard disks to EXT4, and I'm using kernel version 2.6.32-686-bigmem.When I tried to install the program saidar, it surprised me why it does not show my hard drives under 'mountpoint' [URL] <-- Saidar screenshot) as I could when I ran with Debian Lenny with the same kernel, but where the hard drives were formatted in EXT3. My laptop which has Ubuntu 10.04 as OS and the hard drive is formatted in EXT4 can easily show the hard drive in saidar.
I also tried to install PHP SysInfo on the Debian computer, but it does not bother to show anything on the hard disks
I tried to check fstab file and I can see that Debian uses UUID to identify the hard drives, but I've tried to change it to something with /dev/sdx, but it did not help either.[URL] (fstab file)
I know that Debian squeeze is very new, but it would be nice if someone could give me a hint what might be wrong, because I am a little tired of all time to use 'du-hs' command To find out how much space is spent on the various drives, since the command is a little slow, since hard disks are well filled.
find out the total amount of free unused partition space in a hard drive?
reason:
-- when i use fdisk to create a new partition; its hard to tell how much free space is available.
-- tried searching the net but found no answers. some suggested using cfdisk.
-- i don't have cfdisk installed on the centos 5.3 server. i don't think its bundled in the distro any more.
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
View 4 Replies View Relatedi installed quake 4 with id software's run file and copied the pk4 files to the folder but anyways, when i deleted the game, the free hard drive space didn't come back. i had 20 gig free before install and when i installed it, i had 18 gig free but then i deleted it and i still have about 18 gig free. it didn't free up any space when i deleted it.
View 2 Replies View RelatedIn trying to solve a friend's lack of foresight, i have currently disabled my system.
I was using dd_rescue to make a copy of a drive with a corrupt and unfixable Partition Table. I was a fool, and had a drive mounted to /media/Storage, but ran the backup to /media/storage.
Thus, dd_rescue completely filled my primary drive before informing me that there was a problem.
I don't really trust myself with command line work, so I foolishly sudo'ed nautilus and deleted the folder /media/storage.
Unfortunately, I didn't realize it, but the available space on the drive still read 0bytes.
I tried Terminal work to do a sudo apt-get clean command, but for some inane reason, the laptop screen won't support the display setting for the Terminal login, so I just had to hope that I was doing it right.
I wasn't, and decided to try working from a Live CD so I could see what I was doing.
the folder /root/.Trash/ doesn't exist on Ubuntu's install drive, and I can't figure out why the properties of the drive say "contents: 241310 files, 3.7 GB" but also "Total capacity: 52.8 GB. Free space: 0 bytes"
Any suggestions on how I can get this to shake out?
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
I can't find out why that are invisible files using /var/log space
Code:
# du -hs .
5,3G .
[code]...
After running photorec I went from having ~30 gb of free space to having 0 bytes of free space. I have deleted all the results of photorec and various other large files and removed them from trash but it still has not freed up any space. Also, my firefox no longer has back/forward functionality which I'm sure would be fixed by a reinstall but seeing as I have 0 space, I can't really do that. Any thoughts?
View 7 Replies View RelatedI have this little problem: when I open a folder with images from my network drive, I can't see the previews of the files.If the folder is on the local drive no issues, but with the remote one... no luck.I checked around for a solution, without results.. do you know if there is a solution for this little issue
View 4 Replies View RelatedI am trying to create an empty file based on the remaining hard disk space. The problem is that when I create a file that is 1 GB large, the df command shows the remaining space to be only 12 kb smaller than it was before the file was created.
someone@here:/tmp/delete# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 36827144 5031592 29924788 15% /
[code]....
I have openSUSE 11.3 Gnome installed. The nautilus address bar shows the "Button Bar" and if I press Ctrl+L it swaps to the "Text Location Bar". The Text Location bar is where you see the full path to the directory that you're viewing.But I can't set the default addressing to the Text Location Bar.What else should I do to get the text location bar (i.e. the full path) to be the default view in the address bar?
View 4 Replies View RelatedI've got a question on free disk space. I'm currently running CentOS 5.5 on in Xenserver virtual environment. We've had an issue with disk space. My question is as follows: - from a ssh connection i run df -h this gives the value of 90% used leaving me with 9GB. If I use system monitor via a VNC connection the free disk space value is 20GB free on the same volume. Which one is correct? I do use SNMP to monitor the same volume and should alert me when < 10% is free I know this works as I set the alert threshold to < 90% I get an alert.
View 2 Replies View Relatedi used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies View RelatedI have red hat linux server and it has mysql installed whenever i write on terminal command mysql -u root it shows error "ERROR 2002 (HY000): can't connect to local MYSQL server through '/var/lib/mysql/mysql.sock (111) "
And another problem is that it is showing 0 byte free space istaed of freeing the space. it may seems that both problems are dependent on each other.
My system is dual boot with win7 and ubuntu. I have free space of around 10 gb. I want to add this free space to my ubuntu drive. How can i do that?
View 4 Replies View RelatedI have a big partition ext3 and System Monitor show me that there are 14Gb of Free space but only 4Gb of Available space.
View 4 Replies View RelatedI just tried to download a torrent and got an error message indicating there was no space left in the download location I'd specified.
This happened earlier when df -h showed ~900M of free space. Just now, I'm showing ~2.2G of free space. Anyone have ideas what could be causing this?
I just install Ubuntu 9.10 on my flesh drive with capacity 4 Gb free space now is 300 Mb
but i have found that some folder have colon FREE space and quite big some folders have free space more than 1 gb))here is a question 1: HOW COULD I GET THIS FREE SPACE? does exist any folders which are not needed for system and i can delete?
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
I want to update my com but update manager says "The upgrade needs a total of 498M free space on disk '/'. free at least an additional 495M of disk space on '/'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. I tried sudo apt-get clean and it did nothing I also checked the trash and theres nothing.
View 3 Replies View RelatedI am a complete noob using Ubuntu 9.10 for the past 6 months. I have a dual boot system i.e windows XP and Ubuntu 9.10. I never had any issue until I started getting the following warning message whenever I try to install updates from update manager. I can't even download other stuff from internet.
Not enough free disk space
The upgrade needs a total of 173M free space on disk '/'. Please free at least an additional 63.1M of disk space on '/'. Empty your trash and remove temporary packages of former installations using 'sudo apt-get clean'. Emptying trash and using sudo apt-get clean did not help.
I have an external harddrive. When I delete files off of it, the free space doesn't get updated.
View 3 Replies View RelatedI have Ubuntu and mint persistent on a usb for my laptop. I have noticed that all of my free space is gone just from browsing the internet using applications and I can't get it back. I have tried bleachbit but it has only retrieved 150 mb back. Where do a the files go? How do I delete it?
View 9 Replies View Relatedaccording to the system manager of my machine, one of my ext4 partitions (home folder) reads 7.6GB free but only 574MB available and the disks "fills" when the 574MB are used, and i'm really needing those 7G right now, so:
why does this happen? are those 7G used in anything? any way to allow the system use that free space?
I deleted Win7 from my dual boot but I cannot seem to merge the 160 gig's of free space into my ubuntu partition, ran the live gparted but it will not let me expand the ubuntu partition!
View 4 Replies View Relatedthe method for freeing up space by deleting old kernels is made to sound very simple: go into Synaptic, select the outdated kernels, mark for complete removal, and Apply. Easy. But . . . when I mark a particular kernel for removal, Synaptic also wants to remove a lot of other things, some of which do not bear version numbers and seem generic. I am, to put it mildly, very leery of just telling it to go ahead, lest I end up losing things I should have kept and having a dead or at least crippled box.
Say, for example, that I mark for Complete Removal the line linux-image-2.6.22-15-generic; when I go to Apply that one deletion, I get a laundry list of to-die files that includes:
linux-generic
linux-image-generic
linux-restricted-modules-generic
linux-restricted-modules-2.6.24-27-generic
linux-ubuntu-modules-2.6.24-27-generic
linux-restricted-modules-2.6.22-15-generic
linux-ubuntu-modules-2.6.22-15-generic,........