Ubuntu Multimedia :: Adding Higher Resolutions To 9.10

Feb 8, 2010

I'm trying to add a higher resolution to my system. I've tried to edit xorg.conf but I think I'm wrong. Everytime I edit and reboot, it tells me I need to run in low graphics mode for now. Now I'm trying 'xrandr.' I was able to create a new mode just fine, but when I try to add it to the appropriate output, I get this:

Code:
prog@ubuntu:~$ xrandr --addmode LVDS1 1280x1024_50.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 25
Current serial number in output stream: 26

Here's what xrandr returns:
Code:
prog@ubuntu:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 286mm x 214mm
1024x768 60.0*+ 50.0
800x600 60.3 56.2
640x480 59.9
TV1 disconnected (normal left inverted right x axis y axis)
1280x1024 (0x111) 109.0MHz
h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz
v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz
1280x1024_50.00 (0x112) 89.4MHz
h: width 1280 start 1352 end 1488 total 1696 skew 0 clock 52.7KHz
v: height 1024 start 1025 end 1028 total 1054 clock 50.0Hz

I don't know why it puts it in TV1. There's two of them because I tried two different refresh rates.

View 3 Replies


ADVERTISEMENT

Debian Multimedia :: Cannot Set External Monitor To Higher Resolutions

Jul 8, 2011

I recently got a new external monitor for my laptop, and connected them by VGA. This is what 'xrandr' tells me:

Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1024x768 60.0 
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.0 +
1600x1200 60.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9*
1280x960 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1

However when I try to change to some of the higher resolutions, such as 1920x1080, all I get is a corrupted and flickering image. As indicated above, I am currently on 1440x900@59.9h,z but for some reason 1440x900@75hz doesn't work. The same seems to be true for 1280x1024. The three resolutions above that all cannot be selected properly. I tried setting the resolution to maximum in Windows XP and it worked, and my video games console can set it to 1080p, so I don't think there is anything wrong with the monitor. Is there anything I can do or is this some kind of bug or limitation of the graphics driver or something? The graphics chipset of the laptop is an Intel 945GM, which I believe should be capable of displaying 1920x1080. I am running debian unstable with what seems to be the most up to date version of xserver-xorg-video-intel.

View 2 Replies View Related

Ubuntu :: Enable Higher Resolutions SiS 771 / 761?

Feb 27, 2010

After struggling with this for 2 days and getting nowhere, I found this simple solution.

1. Download packages http://ajoliveira.com/ajoliveira/gen...it_9.10.tar.gz and http://ajoliveira.com/ajoliveira/gen...rg.conf.tar.gz.

One of these contains the driver files and the other a xorg.conf file.

2. Extract the 2 archives by double-clicking on them.

3. Copy the xorg.conf file to the /etc/X11 directory code...

View 2 Replies View Related

Ubuntu :: Lost The Higher Resolutions For Computer?

Apr 30, 2010

I lost the higher resolutions for my computer. The highest available is 1360x768 (which doesn't work well) and currently I'm using 1024x768. Before, I had 1280x1024 working well and I even had higher resolutions available in nvidia-settings. I've ubuntu 9.10 with nvidia drivers (185.18.36).

I've read [URL].. but not necessarily all of it or understood all of it. I've tried dpkg-reconfigure xserver-xorg and the xrandr stuff but nothing has changed, except what xrandr reports, regarding the addition of two modelines 1280x1024. In the end, I suppose something has corrupted some file but how can I figure it out?

Code:
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1280 x 1024
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0

[Code]...

View 1 Replies View Related

OpenSUSE Install :: Grub At Higher Resolutions?

Jan 30, 2011

Just bought a new 1080p monitor (1920x1080) and it works fine in OpenSUSE 11.3. Problem is before I get the KDE start screen everything is not full screen. Now, I checked the rest of the forums and I cannot find a full list of widescreen or 16:9 grub resolutions.

Does anyone have a list of what's supported?

View 9 Replies View Related

OpenSUSE Install :: 11.4 - Unreadable Video (Higher Resolutions)

Mar 10, 2011

Just did a new install of 11.4 over top of my 11.3 and when I reboot into the OS it seems to boot just fine but the video is unreadable. When I boot into the failsafe the screen has a lot of gitter and the monitor tells me it's not in preferred mode of 1680x1050 at 60hz. All resolutions higher than 1280x1024 are unreadable. Tried booting nomodeset as I've read previous ... no luck. I'm still learning linux.

View 9 Replies View Related

Slackware :: 1920x1200 With Vesafb - Higher/wide Resolutions

Jan 8, 2010

So I have been running uvesafb for a while now with no complaints, but klibc hasn't been updated for about a year. I contacted to the author and he said that he will have an update in the coming weeks. However today I was googeling around and to make a long story short, I have successfully been able to get a 1920x1200 console resolution with just the plain old vesafb. This is good news but I am also confused because I've been told many times that is not possible for vesafb to do higher/wide resolutions.

View 14 Replies View Related

Ubuntu Installation :: Missing Higher Resolutions After Install (Sandy Bridge I5-2500K, VGA)?

Jun 2, 2011

after installing Natty on my brand new shuttle with Intel's Sandy Bridge Core i5 (2500K), everything works fine except setting up a higher resolution fitting to my screen.All I need is a 2048x1152 resolution, but all the display configuration in the hardware section of the system settings offers is 1024x768, 800x600, 848x480 or 640x480.The monitor is connected via VGA since it doesn't have a DVI or HDMI plug.Is there a way to tell the system there is more capability? Do I need a different driver? What and where can I check this?

View 4 Replies View Related

Ubuntu Installation :: Plymouth Load Screen Producing Video Artifacts On Higher Resolutions

May 1, 2010

I have a problem with Plymouth. It works pretty well on low res, but on higher resolution some strange video artefacts appear - see attachments.

I use ATI proprietary drivers, if it has something to do with it.

The resolution is set in /etc/default/grub like this:

Code:
GRUB_GFXMODE=1024x768
GRUB_GFXPAYLOAD_LINUX=1024x768x32
edit: reducing colour depth doesn't help /end edit

I don't know whether it has anything to do with the current problem, but Plymouth used not to appear at all until I followed these instructions (or actually I took them from another thread but I can't find it at the moment and these are the same).

I don't know whether it's possible to take them during booting so I've taken these photos with a mobile and retouched in gimp to remove reflections (more or less), and since I'm no pro photographer nor photoshop/gimp master they look as they look. They should do to demonstrate the problem, though.

View 5 Replies View Related

OpenSUSE Install :: Higher Framebuffer Resolutions Not Available During Bootup/console - Nvidia Properietary Driver?

Jun 26, 2011

I'm using the 270.41.19 nvidia properietary driver for my Geforce GTX460 graphics card. I have a Sony TV connected to my HDMI and I know it supports the 1920x1080 resolution. Yes it works after gnome or other DE loads up.

But during the GRUB screen and the bootup console - It defaulted to a 640x480 resolution (as it always does with the nvidia prop driver). I usually used to check the output of hwinfo --framebuffer and choose the resolution by appending the right vga=0xabc parameter.

But now I have a problem since hwinfo says the best widescreen 16:10 framebuffer resolution that my card supports is 1280x800. Here is the output from hwinfo --vbe which should give the info about both my gfx card and my TV.

The initial nouveau driver was able to output native 1920x1080 during the bootup on the console without issues, so I guess even the properietary driver should be able to output (If my understanding is right the nvidia module loads later during the bootup and only is required for the X but not for the console itself).

[Code]...

View 3 Replies View Related

Ubuntu :: Adding Resolutions To Nvidia Driver Based X?

Jan 21, 2010

I just got a new vVidia card for its HDMI capability for my mediacenter and installed the nvidia drivers suggested by the hardware managers.

Right now im connected to a VGA input on a sharp TV, this card/driver like my previous embedded intel card/driver can't make heads or tails of this TV. Intel called it "unknown' nvidia thinks its a CRT (/laugh at a 42'' CRT) so the resolutions it sticks me with are laughable.

Before i used to use xrandr to add a 1600x1400 resolution (though my goal is 1960x1080, full 1080p, i just cant run that through a VGA input) and all was... acceptable.

Now i can no longer do this, since nvidai drivers seem to dominate my attempts. I have gathered i should be able to alter my xorg.conf (which i used to not have, this machine started at 9.10 which is trying to get away from that file) to support som additional resolutions. But i swear i am all thumbs when it comes to touching that file... it always ends with a command line crawl to revert to my backup

SO, anyone know what needs to be altered with this file OR any other method i might try?

Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009

[Code]....

View 1 Replies View Related

Ubuntu Multimedia :: Two Monitors With Different Resolutions?

Apr 12, 2010

I am running Ubuntu 9.10 on an HP laptop with an Intel 82852/82855 GM/GMC Graphics controller. I have a 2nd monitor attached to the VGA port (HP f1703). The problem is that the two screens have different resolutions. the laptop is 1280 x 768 and the other monitor is 1280 x 1024. The xorg.conf file that was created with Xorg -config set both monitors up with 1280 x 1024 resolution so my screen on the laptop looks all "squashed". I have tried to reconfigure it using the Display Preferences dialog but after i re-boot, both screens are unviewable and I have to restore my previous xorg.conf file. I went through the HOWTO: Jaunty Intel Graphics Performance Guide procedure to setup a "safe" configuration but didn't work and I had to restore my "good' xorg.conf file. What do I need to do to setup my two screens with the correct resolutions: 1280 x 768 and 1280 x 1024?

Here is the video portion from my "good" xorg.conf file
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

[Code]...

View 1 Replies View Related

Ubuntu Multimedia :: Can't See Any Screen Resolutions Lines

Apr 5, 2010

Linux Ubuntu 9.10 (karmic), Nvidia g-force 5200, Intel(R) Pentium(R) 4 CPU 2.80GHz(old PC but i need learn Linux inside out b4 I go 100% Linux)But I have taken the time to the learn the basic cmds like man mv cp apt-get install etc. I cisco engineer but I want to get good with Linux distro's.I have a NVIDIA G-FORCE 5200 which according to NVIDIA'S website the 173.14.x.x driver is the correct one.I have tried diver 173.14xx. I installed it manually and restarted x server.

I have read the installation guides on this forum but to no avail.When I reboot Compiz cube features are working BUT my screen goes 640x350.I tried to edit the /etc/X11/ xorg. conf file but I cant see any screen resolutions lines. I tried changing NV to nvidia and visa versa. Still the screen is buggered.I installed compiz checker and ran it it said all ok. My text goes large the colours are jittery ? When I go to NVIDIA XSERVER SETTINGS i can not change the screen res ? It just stops from selecting the options? I also tried driver 185.18xx and the same results.I also tried installing the drivers with Envy NG and still no better.I now have installed 96.43.13 NVIDIA driver and my screen has went back to normal but I can not enable the cube effects. I take this means it has reverted back to the graphics card on the motherboard? I have also looked at xrandr -s <1014x768> cmd to manually change it and again no avail.

View 3 Replies View Related

Ubuntu Multimedia :: How To Convert .mkv Files To Different Resolutions

Sep 1, 2010

I have a collection of *.mkv files which are 720 HD resolution (1920x720). I'd like to watch them on my netbook, but it can't handle HD content. The videos play fine on any decently-powerful desktop, under either Windows XP/7 or Ubuntu, but they are simply too much for the Atom CPU of the netbook.Is there a way to downconvert the .mkv files to something the netbook can handle? It doesn't have any problem with standard DVD content, which is of course lower resolution. Cutting HD content down to the netbook's native resolution(1024x600) would probably be sufficient.

A free software package available in the repositories would be great, but I have no problem manually installing something if necessary. I have not done any work with converting videos to different formats, so I don't know what's out there for Ubuntu.

View 9 Replies View Related

Ubuntu Multimedia :: Resolutions Will Work In Is Either 1900x1200 OR 1440x900?

Mar 13, 2010

I just upgraded to an ASUS MS227 on a Ubuntu 9.10 box with a "NV34 [GeForce FX 5200] (rev a1)" video card. Here's the problem, the only two resolutions it will work in is either 1900x1200 OR 1440x900. Anything in between shoves the display about 5 inches to the left, so far over that it's not correctable by the monitors own horizontal control.

This is my xorg.conf:

Code:
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
SubSection "Display"
Depth 16

[Code]...

View 2 Replies View Related

Ubuntu Multimedia :: Missing Resolutions In 10.04 64 LTS NVIDIA 9800GT

Aug 9, 2010

This is 10.04 LTS 64-bit. I took all the modern stuff out of the computer, so I should be cool to make the system displays work right with just a single nv 9800gt adapter and just two displays a Viewsonic 1920x1080 and a samsung 2048x1152.

When I first installed, both monitors had the right resolution but the wrong monitor was primary. That appears to be extremely difficult to solve, with none of the options I found working for me, so I just swapped the cables.

After that change, the proper monitor is primary, but the other monitor is now stuck at 640x480. I googled and binged and slapped and blew and sucked and none of the magic lines to put into my xorg.conf have worked - in fact, I'm finding the best solution might be to put together some command lines with xrandr (which only sees one display FWIW) that do what I want, and then run those each time I start up the OS. I'm willing. I can type fast and I have a good memory.

I THINK I'm looking for the magic line I put into my /etc/X11/xorg.conf to get that display rotated 90 degrees. If CW is harder than CCW, I'll re-mount the display if needed. I can be flexible. A higher resolution would be GREAT as well, but I came into the world at 80x24, I can leave it the same way - thing is, seems like soemtimes, if the moons are aligned, I don't need it at all?

If the real solution is to re-install, that's fine, but I'm going to be back here again, with much more cynicism when I buy a new monitor.

Here is my xrandr output:

Code:
:~$ xrandr --prop
Screen 0: minimum 320 x 175, current 2688 x 1152, maximum 2688 x 1152
default connected 2688x1152+0+0 0mm x 0mm
2048x1152 50.0 156.0
1920x1080 51.0 52.0 53.0

[Code]....

View 2 Replies View Related

Ubuntu Multimedia :: Non Standard Resolutions With Split Screen View

Mar 18, 2011

I have 2 screens connected by vga/dvi and need to use different resolutions...at the minute ubuntu is forcing the same for both. Where should I start looking. I have two video files recorded simultaneously. I want to edit them into one video file with non-standard resolution and a split screen view which, two videos can be seen together. I tried kdenlive but I was unable to change the output resolution.

View 1 Replies View Related

Ubuntu Multimedia :: Available Screen Resolutions Fluctuate Randomly On Boot

Jul 28, 2011

I installed Natty on a 5-year-old Compaq with an integrated Intel 8xx chipset, using a Polaroid TLA-01511C monitor, and the list of available resolutions varies quite a bit each time I boot. Sometimes it will only give me 1024x768, 800x600, and 640x480; sometimes it gives me a dozen resolutions ranging up to 1600x1200. Only once has it ever offered me the monitor's native resolution, 1280x800.

I'm guessing the EDID is being missent or misread each time. How can I set it to (ignore the EDID and) allow me to select 1280x800 each time? I did notice that when it was a Windows machine, it would give me the short list of resolutions when booted with the monitor off, but gave more options when booted with the monitor on. Here though, it seems to give the long list when booted with monitor off.

Here's my most current /var/log/Xorg.0.log; this time it booted with about a dozen modes available, but not 1280x800.
Code:
[35.690]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[35.691] X Protocol Version 11, Revision 0
[35.691] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu .....

View 1 Replies View Related

Ubuntu Multimedia :: Nvidia-settings. Res No Higher Than 640?

Jun 30, 2010

I'm running dual-screen. On 24" at 1920x1080 and one 19" at 1440x900. After installing Mint 9 I can't set the resolution any higher than 640x480 in nvidia-settings. I've installed the "recommended" nvidia-driver that Mint suggests.

[Code]...

What could be the problem? Why can't I set the res higher than 640 in nvidia-settings? Everything worked in Mint 8 (10.04). During installation the res was higher than 640.

View 4 Replies View Related

Ubuntu Multimedia :: Unable To Set Console Resolution - Vbeinfo In Grub2 Doesn't Report All Resolutions

May 6, 2010

I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. I do not have (or want) the X Window System installed.

I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub2:

Code:

grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:

[code]....

View 5 Replies View Related

Debian Multimedia :: Xorg.conf To Get Back I915 Native Resolutions?

Jun 11, 2011

I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.

[Code]....

Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.

View 1 Replies View Related

Ubuntu Multimedia :: Unable To Get Any Reslotuion Higher Than 800x600?

Nov 15, 2010

Ever since i installed 10.10 on my Toshiba portege 3505, i have not been able to get any reslotuion higher than 800x600. This issue has me stumped.

View 1 Replies View Related

Ubuntu Multimedia :: 10.04 - Cannot Set Screen Resolution Higher Than 800x600

Mar 5, 2011

I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.

View 4 Replies View Related

Ubuntu Multimedia :: Graphics Card For Higher Resolution?

Apr 13, 2011

I'm looking for advice on which is the best video card to get for Ubuntu 11.4. At the moment I have an INTEL SERIES 4 INTEGRATED GRAPHICS CONTROLLER and I can only get it recognized as a "VGA COMPATIBLE" Due to my eyesight I need to have the resolution smaller something like 1168 x 752 I dont need to be be able to play games or anything like that. Just typing, videos and general PC work. OR if anyone could point me in the direction of installing better drivers for my INTEL card as I know Windows XP can give me resolutions of this depth.

View 2 Replies View Related

Ubuntu Multimedia :: External Monitor Having Resolution Higher Than Native

Jan 2, 2010

I've got a little problem with my 9" netbook. It came preinstalled with Ubuntu (factory install), but I reinstalled it to get a fresh karmic as it was a second hand.The problem is, whenever I plug in an external monitor, rightclick on the display icon and click "Configure Display Settings..." both monitors go black and nothing responds. Weird thing though, is that sometimes the mouse appears on the second monitor. I need a solution for this, either creating a xorg file (I have no clue on how to do that) or some other solution that works.

My netbook resolution is 1024*600, the external monitor resolution is 1024*768. It should be noted that I had a similar problem on another Ubuntu laptop (NVIDIA drivers), but it had to do with the resolution height. My laptop had 1440*900 and my external monitor needed to have the height lower then 900.
For further information, this is what the system profiler says about my graphics card:Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller.I hope you guys can help me, as plugging in a netbook to an external monitor (or TV) is not uncommon to me I like doing that, even if there's no point in it.I hope I gave enough information on this, I'm willing to give more if needed of course

View 5 Replies View Related

Ubuntu Multimedia :: BenQ E2200HD Monitor - Unable To Configure A Resolution Higher Than 800x600

Mar 6, 2011

I'm currently using ubuntu 10.04 version. I've recently purchased a BenQ E2200HD monitor. However, the monitor is unable to configure a resolution higher than 800x600. I've tried changing it via 'preferences' - 'monitor' etc. The monitor model is 'unknown'. and the highest resolution available is the 800x600.

I've tried changing it manually, but it says x.cong file does not exist. Xrandr doesnt seem to work either. Or i would get CTRC 262. My current set up is, intel i5 2600, 4GB Ram, Nvidia GTS 240. I'm pretty certain, my graphics card (despite being in the low end) can support HD resolution. Even if it can't, it surely can support a resolution higher than 800x600.

View 7 Replies View Related

Ubuntu Multimedia :: Adding Subtitles To A Video?

Feb 6, 2010

I'm sure this is easy to do. I want to create one of those "Hitler" internet meme things for a presentation I'm doing at work, which of course, involves adding custom subtitles to a video. Now, I've found the tutorial that says how to use the right filter with avidemux, but I was wondering what the easiest way is to create the file for that filter to read. Is it just a matter of manually writing it up in my fav text editor? something that looks like

startTime,duration,text

(one per line) then I'd rather just textedit it manually, but if it's something complicated, then I should use some software to do it...

View 9 Replies View Related

Ubuntu Multimedia :: Adding Shoutcast To Amarok 2?

May 28, 2010

I am running 10.04 Gnome. I have installed Amarok and would like to use the Shoutcast internet radio streams. How do you do that?

View 8 Replies View Related

Debian Multimedia :: Adding A Second Monitor?

Jul 17, 2011

I'm a newcomer to Linux and so I apologize in advance for my question (that may be a newbie's question indeed).I've just changed my system from Lenny and installed the newest version of Squeeze ( X.Org X Server 1.7.7, Build Operating System: Linux 2.6.37-trunk-amd64 x86_64 Debian).When adding a second monitor (smaller with different specs) I get the same resolution on both screens--that of the smaller one.

View 3 Replies View Related

Ubuntu Multimedia :: Adding Nvidia GeForce 210 Video Card?

Jan 5, 2010

I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:

Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection

[Code]...

I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved