I'd like to do a live video streaming session later in the week (ie - people see what I do on the desktop and hear me yap in the mic). Can anyone recommend a reliable setup to do this? Most sites require some Flash thing which isn't available on Ubuntu. I tried webcamstudio a while back and that seems to have a huge (5s+ delay).
View 5 RepliesI updated steam and it no longer works. When I tried to load it up Wine comes up and then closes. Im pretty sure this has to deal with the new steam interface. But Im not entirely sure. So I would like to know if any one is having issues currently?
View 1 Replies View RelatedFirst post, and I apologize if it's already been covered and/or I put this in the wrong section, but I couldn't find anything quite like what I was looking for. Basically, I have been running Ubuntu on my backup machines for near a year now and I LOVE it. I want to move my main machine over to Ubuntu as well but there is one thing standing in my way: namely, my Steam collection.
I've seen on several websites and forum threads that Steam and its games run fairly well through Wine, but I've never used Wine before and am kind of nervous about setting this all up. My question is, is there any tutorial available that can walk me through getting steam working through Wine without issues? I've gotten fairly used to linux at this point, so I'm not afraid of the shell, I'm just looking for a little guidance. Also, a side question: I play Garry's Mod all the time, which I could see having lot of potential problems running on linux due to all the addons and stuff. Have any of you ever played Gmod on Ubuntu before? And if so does it work ok with most of the addons?
I'm not sure this is, strictly speaking, an Ubuntu problem (although it may be), but people around here seem to be more knowledgeable than they are anywhere else, so it's worth a try.
CNN recently started offering its news station on live streaming video for those who get CNN from a participating cable provider. For better or worse, I get CNN on Comcast, so no problem there.
Except for lagging video because lack of processing speed, it all works fine on my netbook, on which I have Ubuntu 10.04 installed.
But on my desktop, where I'm using Ubuntu 11.04, no such luck. The problem is the same regardless of whether I'm using Opera, Firefox or Chrome.
I can go to http://cnn.com/video and get the standard video streams (not CNN live) just fine. When I click on the "Live" button and then the "Unlock Live TV" button, I get, as expected, the "Sign in to watch live TV" dialogue box. So I click on Comcast, log in correctly, and am returned to the main screen. The page appears to be loading correctly, and then I get the "Sign in to watch live TV" dialogue box again. No matter how many times I try, that's what I keep on getting.
If this didn't work on my netbook, I'd just assume that for some reason the setup is Linux-unfriendly, but now I'm determined to get this working.
I've checked my plugin settings on my browsers and nothing seems amiss. I've tried deleting all cookies, persistent storage, Flash cookies and all such things, but to no avail. Even though I had the most recent version, I even uninstalled and reinstalled Flash, but that didn't change anything.
I've been trying to get my Hauppauge USB Live 2 video grabber to work under Ubuntu 10.04. I have installed the drivers, and using TVTime I get a perfect picture - but no sound, and also I can't record with it. I have found a guide on how to get it with sound using MythTV, but it seems I fail at setting it up. It tells me it couldn't find the backend server, but it's running in my terminal.
View 1 Replies View RelatedI tried to run the XBMC live disc but could not fully boot. Each time I could only get to a command prompt after the XBMC splash screen with spinning circle. So I thought, "Maybe because my computer is sort of old (Pentium 4, 2.26 Ghz, 512 RAM) it doesn't like the XBMC Live disc. It will probably work if I install to the HDD." I installed it only to get the same result, XBMC splash screen then loading of command prompt. Does anyone know how to fix this? Is the computer compatible?
View 1 Replies View RelatedI am wondering how i would do this using VLC (i want both video and audio to be recored),
i see this RTSP Protocol people use but no idea how to use this for a website thats going to have a live show on.
By the way the thing i want to record will be here http://e3.nintendo.com.
Would it be rtsp://e3.nintendo.com?
hopefully thats a link that can be recorded...right?
the reason i want to record this is because i got a test i have to take... i gotta stay for like 2 hours.
I recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.
250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X
I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.
Code: Select all
Signal 11 caught.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
[Code] ....
I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)
Things that I have done thus far:
-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)
Code: Select all
lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
2.24.25
3.14.5
Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?
My hypothesis:
-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)
I know how to take a screenshot of my desktop, but how could I take a video?... I just wish to send a friend how to set a few things on his website but instead of writing the whole process, I would rather send him a video.
View 1 Replies View RelatedAfter searching for about 3 hours i finally decided to ask on forums. Is it even possible to use an Flv video file downloaded (very short) off you-tube as an animated desktop wall paper. I was trying to get it to work with xwinwrap but when i go to set the screen saver i want to play as the wall paper i am not able to see the video file i want, it just shows the default screen savers. I was wondering if what i am attempting is possible. Also if it is, how might i go about this?
View 1 Replies View RelatedWhen I used Hulu Desktop on my old integrated VGA video output, it played fairly well. Now I got a new video card and connected my monitor and installed the latest drivers and it doesn't play as well, it buffers and I don't know how to explain the rest.
View 9 Replies View RelatedAfter seeing how good netflix movies looked over a wireless connection I decided to pull out an old desktop to see if I could up a basic media player . I loaded Ubuntu 10.4 and was impressed how fast and clean the computer ran. I also downloaded the latest version of boxee. I was disappointed with the quality of video; video was not very sharp, there were square blocks(pixelated) in dark areas of the picture. At this point I am trying to decide if the poor quality is due to my video card, boxee, CPU or if I am expecting too much from web content. should I just a browser or VLC. Naturally I would like to spend little money and use what I have. If however my hardware is not salvageable for what I want to use it for, I would like to know. Any opinions?
Specs are:
-P4 , Dual Processors 3.2G
-2 Gig Ram
-Sata Drives
-Nvidia Fx5200 AGP 128 Ram
-Nic 100
Network speed 25 Mb/s down
I installed 10.10 (tried upgrade and clean install) on my thinkpad x40. I could not enable desktop effects and video playback is very sloppy. On 10.04 works fine. I tried compiz-check
Code:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: intel
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [ OK ]
This is the output on 10.04
Code:
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: vesa
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: vesa driver in use
Would you like to know more? (Y/n) y
The vesa driver is not capable of running Compiz, you need to install the proper driver for your graphics card. I tried with newer kenel, but no luck. I tried to install the newer driver from intel. I am not quite sure I managed to install them properly, though. Is this the appropriate sub-forum for this topic, or "hardware and laptops".
i have noticed about 10 desktop crashes since may, because of gnome videos(totem). in particular, when i repeatedly open and close videos, the desktop freeze. should i use another program?
View 0 Replies View RelatedI am fairly new to Ubuntu, so I'm sorry if I don't include any necessary information. Installed 10.10 rc from CD about 3 days prior to official release and everything was working fine... went about installing software and setting up laptop for use. About one week later, got prompted for upgrade and went ahead through update manager. Now can't enable desktop effects. Right after upgrade had a period where title bars of windows would not display... menus were present, but no title bars, no maximize/minimize/close buttons and no dragging windows to new locations on screen That has since resolved itself. Spent quite awhile searching forums, created xorg.conf at one point, later deleted it.
compiz-check says this:
Code:
./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Driver in use: intel
[Code]...........
I have a problem with the graphics on my thinkpad a22m laptop. specs:
900mhz cpu
256 ram
20gig hd
??ati rage mobility m3 video card ??
when I start up ubuntu (10.10) and reach the desktop, the screen is messed up. The center of the screen becomes blurry, and it looks like what is normally the right part of the screen is duplicated in the middle of the screen (with what should be the middle of the screen disappearing).
I think its an ATI video card, and I tried to install different driver from Softwarecenter but no succes.I know the screen is working, because when I boot forinstance, the Ibm logo is showed nicely across the screen. So its not a hardware issue. Another thing, I got puppy linux to work correctly after having the same grapphic issues on that OS when I first installed it. But some how I managed to get the right drivers. But as I like ubuntu more, I would appriciate your help with figuring this out
ps. when I try to setup screen resolution in System>Settings>"resolution", Ubuntu says "unknown display" (marked with red color).
im looking for a good screen recorder that can record video from my desktop and audio through a mic and i need it to export the files as mp4 so i can edit it. i can use terminal commands if necessary but would prefer a GUI because i only have a few days to learn the program.
View 4 Replies View RelatedI wanna install video player on my OpenSuse 11.3 with KDE as Desktop Manager. But as we know, there are so many video player in Linux. So, I want to know which video player is better, Mplayer or VLC?? which one has better codec?? or is there a better video player other than these?
View 9 Replies View RelatedI'm running Karmic Koala 64 bit on my Lenovo T400 laptop with switchable graphics having both Intel and ATI video cards. I've set my bios to use the intel card only and turned the automatic switching off. So far so good, but I'd like to turn on compiz for basic window animations. When I try to start compiz by selecting
Code:
"Appearance Preferences" -> "Visual Effects" -> "Normal"
I get an error message saying "Desktop effects cannot be enabled"
Code:
"System" -> "Administration" -> "Hardware Drivers"
doesn't show any new drivers that could be installed. This was working out of the box when I first installed Karmic Koala a few month ago, but things got messed up when I installed the restricted drivers for my ATI card. Now I can enable compiz if I switch to ATI from my bios settings and install the drivers but I don't want to use it due to high power consumption and I've removed the ATI drivers.
Here is my xorg.conf file:
Code:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]....
I want to make a live-USB containing among others both Ubuntu desktop i386 and Ubuntu desktop AMD64. How do I go about this? I tried using unetbootin, first adding i386 and then amd64, but that failed. My computer with an athlon II did manage to boot, and showed it had booted into the 64-bit version (ram shown was 3.9 GB, i386 goes to about 2.7 I think), my wife's computer with a pentium 4 did not manage to boot, got to a black screen. I think this is because casper has issues, being overwritten (I'd seen something to that effect somewhere), and thus only the latest version added being booted (in this case amd 64).
I'm under the impression that the startup disc creator included won't help, nor won't the multicd.sh script, so how do I circumvent the issues?
I've got an old iMac g3 on which I'd like to install Ubuntu Dapper Drake.Here's the problem:I insert the disk in the computer.Keep pressing "C" till this comes out:Quote:"The default option is "live" bla bla bla but in case of problems use "Live video=ofonly"I write "Live".The orange progress bar appears, but the the screen becomes black.I still can hear sounds: the classic ubuntu log-in music, but I can not see anything: I guess the live has started, but the screen is just black.By pressing CTRL-ALT-BACKSPACE I'm able to come back to shell.
Once rebooted, I try "Live video=ofonly".Again the orange progress bar, but then this message comes outQuote:"Failed to start the X Server, It is likely that is not set up correctly. Would you like to view the server output to diagnose the problem?"Even if I dont select anything, some random words appear in the screen, too fast for me to read them.Then I'm back to shell.I read here (that the problem is caused by Xorg and that the solution can but editing his configuration by using Quote:sudo nano /etc/X11/xorg.confBut I just don't know when to do that: Ubuntu is not installed yet and there is only MacOS 9.2 on that machine.
I just made the switch from windows xp and i am very glad i did. One problem though, I cant get steam games to run right. I have steam installed on an external hard drive and can start it up with wine but whenever i try to run a game, the "starting (game name here)" screen comes up and then disappears and the game doesn't open. I've tried several different tutorials on how to run steam but all they do is tell how to install it.I'm running ubuntu 9.10 x64 if that helps at all.
View 3 Replies View RelatedI am having a bit of a problem with Wine as I cannot remove any of the programs that I have installed in it, namely Steam. Even if I try to uninstall wine via "sudo apt-get remove wine" I can still navigate to Steam through Applications - Wine - Programs - Steam. I don't know what to do. I've even tried the "Uninstall Wine Software" option to get rid of Steam but that has also failed.
View 3 Replies View RelatedWhy the hell can't I download steam? (MSI File)So far ubuntu has been nothing but trouble and is more complicated then windows xp.
View 5 Replies View RelatedI installed it flawlessly, but whenever I login I get this: and it disappears and nothing happens.
View 7 Replies View RelatedI have no video at all booting to Lucid from Live CD. When the CD first boots, I see what appears to be Plymouth, then the monitor goes into standby. The booting process appears to continue, but without a screen to look at, its not much use.
Asus M2N-X MB
4GB RAM
Sapphire Radeon 3450 PCI-E 512MB
LG 19' LCD model L1933TR (Connected through DVI)
I want to boot to a Live session and then create a Bootable flash drive to carry my Ubuntu installation around.
Will Steam work with the newest version with Ubuntu 11.04?
View 1 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?