Do you know if there is anyway to reduce the echo in audio files, by using Cinelerra, Audacity or whatever....Online, I haven't found incoragins answer...hope something better can come up from the forum.
View 1 RepliesI use an echo indigo audio card. When I do aplay -l I see this card, and I can ouput audio through it by specifically telling mplayer to use this (alsa) device. Now I want to use this card as default for all audio. At the moment the default is pulseaudio through the built in soundcard. How can I change this? Im running Ubuntu 10.04.
View 4 Replies View RelatedI have installed this program ok but I am new to command lines in terminal.
I want to convert some wav files to wma files. I have the wav files currently in a folder called Test to make it easy. So I have entered the following command line:
ajpearson@ajpearson-laptop:~/Desktop/pacpl-4.0.5$ pacpl --to wma home/ajpearson/Desktop/Test and the error message I get is:
error: the following is not a file or directory: home/ajpearson/Desktop/Test
It does not matter what directory I use I get the same error. I am sure the answer is obvious - but not t me.
What would be a nice, simple command to go through all files in a directory (no sub-directories), and change all the MP4 Video files I have to MP3 audio files (keeping the original filenames except for changing the "mp4" extension to "mp3")?
The files in question were videos taken with one of those Flip cameras, but I only need the audio off of it.
I have a rack of four 1TB drives all partitioned identically with three primary partitions. On each drive
- the first partition is only 64MB;
- the second is a large 900GB partition and
- the last holds all the remaining space
mdadm has been used to set up
/dev/md0 - RAID1, comprised of /dev/sda1 and /dev/sdb1
/dev/md1 - RAID5, comprised of /dev/sda2, /dev/sdb2, /dev/sdc2, /dev/sdd2
/dev/md2 - RAID5, comprised of /dev/sda3, /dev/sdb3, /dev/sdc3, /dev/sdd3
OK, so it was a silly mistake to make - but I am now need to increase the size of /dev/md0. My thinking is to reduce the size of md1 so that I can grow md0.
On md1 I have two logical volumes. I've successfully reduced the size of the volume so that I can reduce the size of md1. Now I'm at the nervous stage; I can find little written on the topic of shrinking RAID5 arrays - and even if I do this I'm unsure if I can move partitions around to regain the space I so desire.
A friend of mine has downloaded an album from itunes for me because I could not do it from Ubuntu. Afterwards he sent me the files.
Is there any way I can burn these files to an audio CD from Ubuntu?
Also... Can I just put these .m4a files on a USB stick along with my .mp3`s and expect all car radios to be able to play them?
Is it at all fathomable to play .qcp files on Ubuntu 11.04? I REALLY want to... I recorded this totally amazing trumpet player, and I need to play this audio to learn more.
"There is no application installed for RIFF audio files." Is what I get when I double click it.
WAIT! VLC does it! OMG YAY! With skips in the audio How can I convert to mp3
Download this: [URL]
It converts any mobile file to a file of your choice, it worked PERFECTLY for my .qcp file, converted it from qcp to mp3 with no problem, no skips, full file.
My work just installed a new surveillance system and it uses .box video files and .idx audio to go along with it. They have a windows program to view them but I would love to keep on using my Ubuntu laptop.
View 1 Replies View Relatedi use sony's nwz video walkman, earlier when i used windows xp it was very easy to change album art. When windows media player is playing certain music file i used to drag and drop some jpg file as album art and then transfer the file into my walkman; but now in rhythmbox if i drag and drop it changes the album art momentarily but when i transfer the music into walkman it doesn't show that album art.
View 9 Replies View RelatedI put all my dvds on my "media center" by converting them to .MP4 with handbrake.
Recently I saw that with a MKV file you could do soft subtitles. I tested a part of a movie, and the audio and video are very out of sync.
With MP4/burned in audio everything is ok...
Edit: Ow yes I'm using XBMC for playing it. MP4 + MKV files are both H.264, they have the exact same settings except for subtitles...
Weirdly Enough: I tried another video and at this one the audio is in sync....
I need to export DVD chapters into WMV files (with audio). dvd::rip doesn't seem to support WMV output.
View 1 Replies View RelatedFor the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
a movie is encoded with AC3 in 6 channel audio, what I get out is all of the sounds except for voices, which in 5.1 would be sent to the center channel. What I usually do is fire up avidemux and convert the audio to mp3 stereo, as converting to a 5.1 format usually ends up with a very odd sound (like running everything through an echo chamber). What I'd like to do is run a script to batch-convert these files from AC3 to MP3. The video format may vary, but they are usually XVID. I am comfortable at the command line, but I am not well-versed in audio/video tool terms. I don't need anything extravagant, I just want something that works. Heck, even if it is done one at a time, having a shell script that I can use to simply type:
tool.sh inputfile.avi outputfile.avi
I'm using latest version of ubuntu 10.04.
Sometimes when i play a media file i get this error :
Code:
"An error occurred : Failed to connect stream: Too large"
I have all the codecs installed.None of the player totem,vlc plays them.
I have several audiobooks that are each split into many small chapters, and I would like to string together about ten of them at a time, so that I don't have 60 4-5 minute mp3 files per audiobook.If I were to do this all by hand, with audacity or something similar, it would get very tedious, so I'd like to know if there's already a program that would do it for me when told which files to string together.
View 2 Replies View RelatedIs there a way to play read audio/video files (.rmvb .rm etc) using the VLC Player without installing realplayer?
View 1 Replies View RelatedError in mplayer is Cannot find codec for audio format 0x706C6351
View 1 Replies View RelatedDSS and DSS Pro file formats are used by professional voice recorders such as the Olympus DS-4000, Olympus DS-5000 and Philips LFH-9600. Is there any known program running under Linux to play and/or convert these files into something more compatible?
View 2 Replies View RelatedI've got a small problem with Banshee that I need some help with, if possible. I'm currently using the latest version of Ubuntu 11.04 and it's up to date. The problem i'm having is with Banshee playing music files over my DAAP share. My DAAP server is running Firefly (mt-daapd), and Banshee can see the server and shares just fine. It loads the song list from the server, but when I select a song to play it just sits there. Rhythmbox works just fine, sees the share and plays the songs ok (which is what i've fallen back to for the moment), so I know it's not a hardware or software problem from the sound "system".
Other features of Banshee play just fine, including internet radio stations, internet archives, and importing songs from the server (which makes the song local instead of networked from a single source). Ok, so streaming from the DAAP share isn't working; here's the output from the terninal I started Banshee from:
[-----START-----]
[Info 07:13:23.440] Running Banshee 2.0.0: [Ubuntu 11.04 (linux-gnu, i686) @ 2011-06-28 05:46:57 UTC]
[Info 07:13:28.765] Updating web proxy from GConf
[Info 07:13:28.998] All services are started 4.668005
** (Banshee:2341): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object
[Code]...
My name is Mark and I'm new here. I would like to learn how to reduce the resolution on video files. I have MP4 and .avi files that I want to work with. I'm new to Linux but I'm not a computer newbie. I have avidemux on my machine but I can't figure out how to do what I want to do with it.
View 7 Replies View RelatedWhat program can make audio CDs out of MP3 files? In Gnome.
A friend sent me a zip file of mp3s for an out-of-print cassette tape that I was trying to get for my husband to give him for his birthday and I'd like to be able to make a CD.
I want to convert some audio files, to mp3 files. I have only k3b but it converts into ogg or wav. Is there any program to convert a track in mp3? r a k3b add-on?
View 6 Replies View RelatedWhat is the difference between
$echo cat
$cat echo
I was using a line device to record compact cassettes to digital (Linear PCM) then I transferred these files to the computer.Due to cassette print-through, there is audible, albeit weak, pre-echo. This is not caused by the recorder since I can hear them playing the cassettes on a deck.So. Does Audacity have a pre-echo removal function, or can a similar result be obtained by applying different effects? Or any 3rd-party plug-ins?
View 1 Replies View RelatedI am on Squeeze. In the past I have successfully extracted audio from video files. Recently when I try it I get an unplayable file, just some brief noise nothing more. Mplayer on the other hand plays every video and audio file out there. Is there something wrong with mplayer? I installed mplayer from the repo. I haven't compile mplayer since before Lenny.
View 14 Replies View RelatedI am trying to join about 3 video file and have an audio track over the top. Nothing major and to give you an idea how basic it needs to be, I used windows movie maker in the past. I can't figure out how to do it! I had a flick through the web and some people recommended Avidmux. I installed it and i can edit one video file with no audio but if i try to incorporate a second file it just opens a new window! Has anyone got any ideas on good video editing software.
View 3 Replies View Related... with an error message box stating that :
"The playback of this movie requires a GStreamer element audioconvert plugin which is not installed."
I'm running Maverick right now, but the problem also occurs with Lucid. My sound card is a creative X-Fi Titanium (emu20k2). Audio playback is fine, surround is fine, etc. Audio capture is "fine" too - the problem is that the microphone picks up everything that the headset is outputting. This is very strange since the headset is a noice-cancelling headset and in order for that to happen on other platforms (windows) I essentially have to turn the volume up to astronomical levels. As always, this doesn't happen on windows.
Needless to say this poses somewhat of a problem with VoIP applications since folks I'm interacting with constantly hear themselves echoed back by me. The only solution is to tune down the microphone volume but that adds another problem: people can no longer hear me clearly.
So my question is: is there a way to enable echo reduction for Pulse Audio so that the mic doesn't constantly capture what's coming from the outputs? And yes - when I look at the "input" tab in the sound preferences application I can see the marker move if I speak - same with pavucontrol
How can I echo the sound from the microphone to the speakers?
I.e., anything that is picked up by the microphone is played on the speakers immediately, without recording anything. Preferably with the ability to increase the volume.
Ubuntu 10.04.1
Nvidia gpu ( Asus GeForce GTS 450 Series graphic card)
DVI connection to monitor (Dell 2405)
Using a VGA connection I can use the buttons on the monitor to control both contrast and brightness. Using dvi there is no control(no contrast control and the brightness button changes the numbers but not the actual brightness!) I cannot find the app that controls the Nvidia GPU
(it should exist as I found it on Zenwalk).