What would be a nice, simple command to go through all files in a directory (no sub-directories), and change all the MP4 Video files I have to MP3 audio files (keeping the original filenames except for changing the "mp4" extension to "mp3")?
The files in question were videos taken with one of those Flip cameras, but I only need the audio off of it.
My work just installed a new surveillance system and it uses .box video files and .idx audio to go along with it. They have a windows program to view them but I would love to keep on using my Ubuntu laptop.
View 1 Replies View RelatedI put all my dvds on my "media center" by converting them to .MP4 with handbrake.
Recently I saw that with a MKV file you could do soft subtitles. I tested a part of a movie, and the audio and video are very out of sync.
With MP4/burned in audio everything is ok...
Edit: Ow yes I'm using XBMC for playing it. MP4 + MKV files are both H.264, they have the exact same settings except for subtitles...
Weirdly Enough: I tried another video and at this one the audio is in sync....
a movie is encoded with AC3 in 6 channel audio, what I get out is all of the sounds except for voices, which in 5.1 would be sent to the center channel. What I usually do is fire up avidemux and convert the audio to mp3 stereo, as converting to a 5.1 format usually ends up with a very odd sound (like running everything through an echo chamber). What I'd like to do is run a script to batch-convert these files from AC3 to MP3. The video format may vary, but they are usually XVID. I am comfortable at the command line, but I am not well-versed in audio/video tool terms. I don't need anything extravagant, I just want something that works. Heck, even if it is done one at a time, having a shell script that I can use to simply type:
tool.sh inputfile.avi outputfile.avi
I'm using latest version of ubuntu 10.04.
Sometimes when i play a media file i get this error :
Code:
"An error occurred : Failed to connect stream: Too large"
I have all the codecs installed.None of the player totem,vlc plays them.
Is there a way to play read audio/video files (.rmvb .rm etc) using the VLC Player without installing realplayer?
View 1 Replies View Relatedi use sony's nwz video walkman, earlier when i used windows xp it was very easy to change album art. When windows media player is playing certain music file i used to drag and drop some jpg file as album art and then transfer the file into my walkman; but now in rhythmbox if i drag and drop it changes the album art momentarily but when i transfer the music into walkman it doesn't show that album art.
View 9 Replies View RelatedI am on Squeeze. In the past I have successfully extracted audio from video files. Recently when I try it I get an unplayable file, just some brief noise nothing more. Mplayer on the other hand plays every video and audio file out there. Is there something wrong with mplayer? I installed mplayer from the repo. I haven't compile mplayer since before Lenny.
View 14 Replies View RelatedWhat is the best/easiest way to get ALL multimedia codecs both free nd non free so i can play all types of audio an video files? Like xvid quicktime, avi windows video files etc etc
View 2 Replies View RelatedHow can I download multimedia codecs which enables me to play all kind of audio and video files. I am using 64 bit F12.
View 3 Replies View RelatedI have installed this program ok but I am new to command lines in terminal.
I want to convert some wav files to wma files. I have the wav files currently in a folder called Test to make it easy. So I have entered the following command line:
ajpearson@ajpearson-laptop:~/Desktop/pacpl-4.0.5$ pacpl --to wma home/ajpearson/Desktop/Test and the error message I get is:
error: the following is not a file or directory: home/ajpearson/Desktop/Test
It does not matter what directory I use I get the same error. I am sure the answer is obvious - but not t me.
I am trying to play some mp4 files that were captured on my samsung solstice phone. The videos play fine in gnome mplayer, but there's no sound. I am able to play .mov and .avi files with gnome mplayer with no problems.
View 8 Replies View Relatednot able to play any AV files. i have installed 10.10 on my desktop,i even installed VLC player,but if i run any audio,video file am not able to hear anything,even though the player volume and system volume is maximum..I am unable to hear even the boot up sound that we get hear when we login into ubuntu.
View 5 Replies View Relatedthis is not the right place to ask this question, but I found no other.I have an AAC audio file and a video file. Is there any way to merge them? I tried Avidemux but it won't let me open my AAC file.
View 2 Replies View Relatedi'm using fedora 13i can't player any media files with any media playeri have installed
amarok
xmms
xine
kmplayer
mplayer
rhythmbox
Setting up a linux based church server to be placed with a collocation host.
-- Server will be used for:
--- providing .pdf files
--- live streaming of church services (audio for now audio video soon)
--- providing audio files
--- providing audio-video files
--- our internet web site
A. Is there a preferred Linux distribution that will make this easier?
B. What is the best format for audio and video files that will be viewed variously on Linux, Mac, and Microsoft operating systems? Files will need to be played on older versions of operating systems and may need a free or very low cost software to play (e.g. play on Win2k)
C. What software is best for recording the audio or audio-video files? Some additional funding might be justified for this software, particularly if it can also support live streaming.
D. What software is best for live streaming both on the file creation and the listening-viewing sides of the process?
Ideally we would like to have a single software suite to live stream, and make downloadable audio or audio-video files for later download, and not require those listening and viewing to have to install additional software. Keeping file sizes small is also desirable because some of our users will probably only have dial-up internet.
How would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1
img001.jpg
img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Code:
$ls /dir2
img003.jpg
I've been using Ubuntu for over 5 years. This time I decided to upgrade UNR to the latest 10.10. I am now running it from USB to try it before installing. Excuse my ignorance, but whatever happened to the Terminal? I cannot find it anywhere! I think this release is not going in the right direction if one of the most important tools in Ubuntu is hidden from an average user.
Also, how do I change to the root directory in the files and folders? or at least to the higher directory structure.I won't be installing UNR 10.10 unless I figure out these BASIC things.
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies View RelatedThere are millions of files in many directories. Wherenver i try rm * or find or use xargs, they say 'argument list too long' and exit. How can i deleted files in a directory with so many files without deleting the directory itself.
View 3 Replies View RelatedA friend of mine has downloaded an album from itunes for me because I could not do it from Ubuntu. Afterwards he sent me the files.
Is there any way I can burn these files to an audio CD from Ubuntu?
Also... Can I just put these .m4a files on a USB stick along with my .mp3`s and expect all car radios to be able to play them?
Is it at all fathomable to play .qcp files on Ubuntu 11.04? I REALLY want to... I recorded this totally amazing trumpet player, and I need to play this audio to learn more.
"There is no application installed for RIFF audio files." Is what I get when I double click it.
WAIT! VLC does it! OMG YAY! With skips in the audio How can I convert to mp3
Download this: [URL]
It converts any mobile file to a file of your choice, it worked PERFECTLY for my .qcp file, converted it from qcp to mp3 with no problem, no skips, full file.
Do you know if there is anyway to reduce the echo in audio files, by using Cinelerra, Audacity or whatever....Online, I haven't found incoragins answer...hope something better can come up from the forum.
View 1 Replies View RelatedI need to export DVD chapters into WMV files (with audio). dvd::rip doesn't seem to support WMV output.
View 1 Replies View RelatedError in mplayer is Cannot find codec for audio format 0x706C6351
View 1 Replies View RelatedDSS and DSS Pro file formats are used by professional voice recorders such as the Olympus DS-4000, Olympus DS-5000 and Philips LFH-9600. Is there any known program running under Linux to play and/or convert these files into something more compatible?
View 2 Replies View RelatedFor the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
I have several audiobooks that are each split into many small chapters, and I would like to string together about ten of them at a time, so that I don't have 60 4-5 minute mp3 files per audiobook.If I were to do this all by hand, with audacity or something similar, it would get very tedious, so I'd like to know if there's already a program that would do it for me when told which files to string together.
View 2 Replies View RelatedI wanted to queue up all audio files in particular folder which also has .txt files.I tried$find /data/songs -iname '[^txt]' -exec totem --enqueue '{}' ';'Thinking that this will exclude txt like expression in 'grep'.It did not work
View 2 Replies View RelatedWhat program can make audio CDs out of MP3 files? In Gnome.
A friend sent me a zip file of mp3s for an out-of-print cassette tape that I was trying to get for my husband to give him for his birthday and I'd like to be able to make a CD.