I've had this problem on ubuntu before, and I remember that I had to install a program from synaptics package manager and change the noise removal settings. This worked on someone else's mono mic, and I'm wondering if anyone knows which program changes the system setting for noise cancellation.
View 2 RepliesI need to know how to setup Ubuntu 10.10 64-bit to record what's called the "stereo" and "mono" mix popular in Windows where it records anything playing out of the speakers. The goal is to play the microphone through the speakers at the same time background music is playing and thus record both. I also need to know how to play the microphone through the speakers.
View 1 Replies View RelatedI have another issue, my microphone does not record at all!! When I try to record, it just makes this....dot. dot sound.I have a Gateway NV53 laptop with an internal microphone built in Does anyone know a solution to it?I've done some research and it all seems to end up in a dead...end. I'm running Ubuntu 10.10 and everything is up to date and working so far.
View 1 Replies View RelatedI'm running Ubuntu 9.10 on an Asus F3JC laptop with an integrated webcam and microphone. The webcam is a
Code:
user@ubuntu:~$ lsusb
Bus 001 Device 004: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 WebCam
and it works. If i tap on the microphone or if I blow on it, I hear noises but after I record something with gnome-sound-recorder I don't hear any sound! The same with Skype, for example.
On Xp (other hd partition) it works.
The audio device on the laptop is a
Code:
user@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC660 Analog [ALC660 Analog]
Subdevices: 1/1
[Code]....
If I open the "sound preferences tool" the device for sound input is "Internal Audio Analog Stereo" and even if I tune the volume of the microphone I don't see any movement in the input level bar. I've also checked alsamixer and the digital volum in the capture interface is set at the maximum.
recording defaults to my microphone but I want to record sounds directly from a application.
View 4 Replies View RelatedI was running 9.04 and could, through some magical sequence of toggling options that I was unable to figure out, occasionally get recording from the mic to work in audacity. Ardour worked more reliably, but is kind of over-featured. Audacity is simpler and I know how to get things done. For a while, I was doing basic recording in Ardour, saving it to wav then editing in audacity.
Well, I noticed a howto on getting audacity working in 9.10... so I upgraded ("what could possibly go wrong?"). I still can't record audio in audacity and ardour is now ALSO unable to record audio. They start recording samples but nothing comes in but silence. I've got audacity set to ALSA/default/default and when I click monitor, the stream appears in the pavucontrol app. I've moved it to the input device and that doesn't seem to affect the results at all. Everything looks like it should be working fine except there's some invisible mute button, or something. Under alsamixer's Capture section, Mic has a red "CAPTUR" with no bar to adjust.
I am trying to record audio playback from an application and the microphone at the same time on recordmydesktop using pulse audio. I just can't figure out how to mix them both. I have tried a lot already and can only get either the mic or the audio playback to be recorded, not both. Can this be done using pavucontroll?
I have been search now for hours to find a solution (also here on the forum) for this and getting really frustrated now. Maybe i'm just missing something really obvious, so sorry if this is a stupid question.
I have Ardour GTK2 , and I am trying to record from a mic, AND IT JUST WONT WORK
View 4 Replies View RelatedI just bought a new laptop and installed Ubuntu onto it. Everything is working fine except for the microphone. Every time I try to record, there's a bunch of static in the background. I've tried changing the sliders on "alsamixer", which helps a little bit, but it never completely goes away. I know it's not a hardware problem because it perfectly clear on Windows (I'm dual booting). I've used Ubuntu a lot in the past, but I don't know much about audio drivers, or even how to figure out which one I'm currently using. My laptop is an Acer AS5750-9851 and I'm using Ubuntu 11.04, 64 bit.
View 3 Replies View RelatedI would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?
View 3 Replies View RelatedI am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
I have some troubles with my microphone.I can hear it in ootput if I knock on it or speak, but I can't record from mic. It also does not work in skype.cant figure out what is the problem.
View 5 Replies View RelatedI'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
I have gotten my microphone working, this was an issue for a long time.
Now I can hear myself through my headphones so I know the computer is "hearing" it.
But... I still show "No Input Devices Available" in my Pulse Audio volume control so I'm still not able to record... which of course is my whole point.
In ubuntu,my Microphone is not working , so I can't record sound or voice chat . It works well in windows. So it's not a hardware problem . Is there anything I can do to make it working ?
View 3 Replies View RelatedI have a Toshiba Satellite A100 I am using 10.10 I am using headphone/microphone headset this did work for me with 10.04 never a problem, I have tried to use these to fix problem - audacity/sound recorder/pulse audio volume control/pulse audio device chooser/ (the more I use 10.10 the more I love it its been a learning curve I am sure this is just another one of them for me..)
Re: Microphone not working after upgrade to Ubuntu 10.10 Maverick My hardware profile is Duplex. When I click on the input tab the signal measuring bar is always staying lit on the first section and does not move further. This means that the mic is not capturing sound. In 10.04.1 there was a dropdown menu in the input tab from which I could choose the default microphone and thus choose an option that works. In 10.10 there is no such thing. I kind of fixed it by adding "options snd-hda-intel model=3stack" in alsa-base.conf. Now I have the dropdown menu and my microphone works for now. The problem is that I did not have to do this in 10.04.1 ... options snd-hda-intel model=3stack sudo gedit /etc/modprobe.d/alsa-base.conf for mine it was mic 1 and it worked
I am using KDE and Fedora 14 (13 had the same issue) and i can't capture sound from microphone or use skype. I tried to fix this with alsamixer - but it didn't helped me, lspci shows, that there is sound device
Code:
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 8346
Flags: bus master, fast devsel, latency 0, IRQ 46
Memory at fe8f8000 (64-bit, non-prefetchable) [size=16K]
[Code].....
For some reason my microphone is not working I'm running ubuntu10.10 on a Toshiba R500 Portege it plays sounds ok but i cannot record sounds nor use the mic in Skype etc.
View 7 Replies View RelatedAnyway, being a Windows user before this, I enjoyed recording videos of my computer and the programs on it, but when I switched to Ubuntu 10.04, I kinda hit some tracks.
I installed gtk-recordMyDesktop and permanently killed PulseAudio and installed GNOME ALSA Mixer.
What my problem is is that I want gtk to record digital sounds, you know, what I'm hearing through the speakers, and not my microphone.
I'm using a CAD u37 usb condenser microphone for some semi-pro voiceover work. My clients insist on stereo audio. On my windows machine, my mic works just fine, but it's not in very very good place for recording (a bit too echoey). So I thought I'd use my netbook running ubuntu.I can plug my mic in, and it does record sound, but there is no available sound profile that allows me to just have two-channels of input. Can I install a driver or edit a file somewhere that lets me have stereo input?
View 2 Replies View RelatedI have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
Can i find sample program to record audio through microphone connected to PC.
View 9 Replies View RelatedSo, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedI"m running an online radio station and would like to run my headphone audio into my microphone or a virtual microphone, either way, I would like my audience to hear what I hear without having to hold the Mic to the speakers.
View 2 Replies View Relatedi'm new to ubuntu, this is the second time i've installed it (i had enough of xp). with careful planning and thinking, i managed to get a few things working, like high resolution, java plugin, and flash. but there's a problem i encountered during listening to music: my headphone has only sound in the left speaker. i took a glance at system>preferences>sound, and i tried a couple options, but nothing worked.
some generic information:
- i have an integrated sound card (into an abit kd7 motherboard).
- my headphone is a thomson wpd265, which is working perfectly.
- neither videos, nor .flac audio plays in stereo.
i tried to google the problem, but this thing seems to be a bit rare. i'm sure this problem is related to software, since everything went fine under different circumstances (xp). it turns out that neither the speaker system is working - only the front left works from the five, and 5.1 output laggs.
I would like sound from mono sources to play in both speakers/earphones. How do I do this? Currently, it plays in only one side (which makes for an odd listening experience).I generally use banshee to play sound.
View 2 Replies View RelatedI'm not the developer for psensor but it's in need of a mono icon. I tried making one myself but I'm simply no good at it (noob I am).
[URL]
Why am I asking for a volunteer when I have nothing to do with the development? I use it a lot, and the current icon just annoys me.
i first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
[Code]...
All I can record in my computer using The Sound Recorder in Jaunty is 1. It's either MIC or an MP3. You have to turn off one to keep the other and vice versa. How do you record both?
PS I did some homework and they said I need to install a mixer. But I've tried alsamixer, gnome-alsamixer, kmix, jack, they don't the mixers that I need.
PPS I'm recording from Sound Recorder and gtk-recordmydesktop.