ok so a while ago i updated ubuntu and the sound stopped working. i cant hear anything now not even a system beep - i tried the Comprehensive Sound Problem Solutions Guide by LordRaiden but to no success. i tried alsamixer and all that to check its muted, and its not.
View 3 RepliesI wrote a c console-programme with should output a system beep.But I cannot hear any sound.Which setting of Ubuntu avoid the beep.
View 2 Replies View RelatedHow might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.
View 3 Replies View RelatedCannot hear any sound from the system
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
Subdevices: 0/1
Subdevice #0: subdevice #0
I can't hear the music playing on my speakers, BUT i can hear the music playing in my headphones when i insert my headphones jack.
I have tried configuring aslamixer, tried configuring the sound devices but nothing seems to work. i have also installed a lot of music players such as asla player, audacity and so on. i also tried configuring the aslamixer from the terminal but it did's work as well.
I must add that i have linux ubuntu netbook remix 9.10 i386 installed and windows xp home edition sp3. In windows, i have no problem playing any sound. (I am new to linux <2 days> but very experimented with windows <17 years>).
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedWe have a COM Express carrier board with Intel Atom processor.What happens is COM board issues a reset signal every 3 sec.I am not sure whether its entering BIOS or not..I could not hear any beep..It is difficult to probe the POST error codes on port 80 in this board.And there is no way for display also..Is there any fatal errors where BIOS resets the CPU..?..As far as I know it just halts on encoutering a fatal error..
View 1 Replies View Relatedjust installed Lucid 64-bit. everything running smoothly including the sound except no system beep from PC speaker. system beep is enabled in system -> preferences -> sound. What else can I try? I'm dual booting with Hardy and system beep works fine in Hardy.
View 4 Replies View RelatedI recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg:
[code]....
I tried to follow the instruction here: [URL]. But I failed at step 3 because there is no dropdown box on the linked page. One test command I found online returns errors:
cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.20 emulation code)
Kernel: Linux mary 2.6.30-bpo.2-686 #1 SMP Fri Dec 11 18:12:58 UTC 2009 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xf3300000 irq 22
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
Ubuntu 11.04
Banshee 2.0
I can hear the sound of my files from any other program. However, Banshee 2.0 (the Ubuntu new player) seems to have a bug or something, and I can hear anything.
I hear no sound with pulseaudio, but I hear the "ready for login" sound after the x server starts. OS: Ubuntu x86 10.04
[Code]....
after installing linux no sound in flash video, no sound mp4 but i can hear mp3.
View 5 Replies View RelatedYesterday I installed openSUSE 11.3 on a desktop PC and I noticed that the PC's speaker it's not functioning but if I plug the headphones I can hear the sound system working.
View 8 Replies View RelatedIs there anywhere I can check what is causing this loud system beep or a way to fix this?? I really don't know where to start on this issues. Possibly restart log files but not sure where they're located.
View 2 Replies View RelatedI am having a problem when using Flash. Whenever I am listening to a Flash application (..... primarily), I am unable to hear sound from any other applications (Rhythmbox, movie player, etc).
The converse is also true, if I am using Rhythmbox, and then start ....., the video plays...but with no sound. I have to manually kill the app and web browser (tried multiple...Firefox, Chrome, Swiftfox) to get sounds working correctly. I am my wits end with this problem, and have just putting up with it for several months now.
[Code]...
I have a problem which is a great inconvenience to me. I want to say that I've been searching for the answer for a week and couldn't find anything but problems similar to mine which were unresolved.I used to have debian lenny, but one day i decided to reinstall my operating system and upgraded to sid, so I have a fresh install of debian sid with gnome.
The system beep no longer works on gnome.
What I mean, when i move to terminal(like ctrl+alt+f1) it works great, it also works when i type 'beep' in gnome-terminal. but it doesnt make a sound when i e.g. press ctrl+G, when i am being called on irssi, when i press backspace in gnome-terminal. These things used to work in Lenny, and I really need them (especially this hiliting in irssi). I would go back to Lenny if i didnt need some software that is not present for that version of debian. The pcspkr module is loaded
I recently installed Ubuntu 10.10 AMD64 beta. After installing the flash player, everything worked fine. I installed a few updates, as well as Ubuntu Stuido from the synaptic package manager, and when I rebooted, I can't hear any sound from flash content displayed in Fire Fox. All other sounds work fine, and I made another user account as a test, and that account has full audio functionality, including flash...
View 5 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View RelatedAm not able to hear any sound from my vlc player that i installed for ubuntu even though the video is clear enough....
View 2 Replies View RelatedThis may seem like a stupid question (if not completely ridiculous ), but I was wondering if there's a way to configure audio events so that I can use a wav/ogg sound instead of the PC speaker's default beep for small events like hitting backspace in a text editor when it's the beginning of the document (or any other illegal keyboard action), or in Wine applications when it calls for an "asterisk" sound (it just beeps the PC speaker).
I've looked at similar threads, but they mainly just talk about either the beeps that the machine does when it boots up, or simply turning off the beeping completely. What I want to do is substitute the beeps (that are caused by the OS) for an actual sound that's played through the ALSA/OSS/whatever audio device.
I've been using my girlfriend's Mackbook Pro and really like the beep sound when pressing backspace at a command prompt and really would like to have it on my ubuntu. However, I've checked "Terminal bell" option in the profile settings, but there is still no beep sound. What am I missing here?
View 7 Replies View RelatedI am new to using linux. i have installed gOS linux recently on my system. everything is working fine including the updates, videos and graphics but i cannot hear any sound. my pc configuration is intel dual coree 3.4 ghz, 3 gb ddr2 667 ram, intel 945 gcl (integrated sound driver by sigmatel), 160 gb 7200 rpm hard drive( seagate), nvidia 6600 LE 512 ddr2, creative 2.1. i have tried changing the default sound driver from intel hda alsa mixer which is the default as sound driver in the system to sigamel oss mixer but that proved to be of no use actually. i have also connected a few of my friend' pc s to my system to find out any problems if there is with the sound box but there isn't any.the speaker is just working fine with those systems. but when it comes to my own system i cannot hear any sound.
View 5 Replies View RelatedI can't hear sound in OpenOffice.org Impress in Ubuntu 10.10 (Maverick Meerkat).
View 3 Replies View RelatedIn the current release of Debian, is there a reason that I can only hear sound through one speaker. With any other distro, the sound can be heard through both.
View 3 Replies View RelatedI thought it might be a hardware problem.
Quote:
Quote:
Quote:
Also I've checked the alsamixer and nothing is muted......everything is set to maximum.
I can't hear my start up sound while starting my system?
View 1 Replies View RelatedI newly installed ubuntu 8.04 distro. on my IBM lenovo n200. every thing works fine. except for the sound.
The sound card is detected the driver is installed and loaded but it just won't work.
I have tried removing then installing alsa-base and alsa-utils but nothing.
I have tired tinkering with the mixers but still nothing.
I looked through lots of documentations and suggested solutions with no luck.
I believe that my problem is simple. but I need some one to check what I have done so far to see if I have done it right.
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote: