Ubuntu Multimedia :: Kworld Dvdmaker2 In Server?
Jan 27, 2010
I have been using ubuntu server 9.04 for a few months now, but am still very much a newby. I am now trying to set up a firewatch camera that can be viewed via my web page. I have used motion and an el-cheepo webcam to test the idea out, that works ok but the resolution of course is very poor. Now I want to use an old analogue video camera I have as it has a much better sensor and lens. I have a kworld dvdmaker2 usb video capture device but cannot get it working under ubuntu server. When connected to the server, lsusb reports it as I have searched the forums and google, and found quite a bit of info, most of it well above my head and all of it for the gui version of ubuntu. According to one thread I read, the version of ubuntu I am using should have the driver for this device, maybe this is only in the gui version?
View 5 Replies
ADVERTISEMENT
Aug 28, 2009
First of all, great work openSuSE team and friends ! openSuSE 11.1 is currently the best linux distro. Now, I'm migrating form Windows Vista to openSuSE. I managed to configure everything I need except my USB TV Tuner. I have a Kworld VS-PVR305U. I'm not new to linux, but my knowledge is limited. P.S. I'm using a Acer Aspire 5920G - 1A1G16N (1.5 Ghz Intel Core 2 Duo, 2 GB RAM, 160 HDD, 8600M GT)
View 5 Replies
View Related
Mar 1, 2010
i have little problem to work kworld dvb-t Bus 001 Device 004: ID 1b80:e383 Afatech uname -r 2.6.31.5-0.1-desktop. how i can work it v4l-dvb? but how i compile
View 1 Replies
View Related
Apr 7, 2011
How do I install Kworld 399UR USB tuner stick? NB this is 399UR, not 399U. I am running Kubuntu 10.10. dmesg picks it up as AF9015.
View 3 Replies
View Related
Apr 13, 2010
I want to stream .avi *divx/xvid* (because of the nice compression and quality) online and have all streams accessible through a web based library type thing. Something like Jinzora ( http://en.jinzora.com/ ) is what I am looking for, but it's buggy. I would even be satisfied with a web based library of streams that you click and open with an external program. I have searched a lot for this and the only thing I found that can do this how I want (if it worked right) was jinzora. I don't want to convert to mpeg4 or flv because of size and quality issues.
View 5 Replies
View Related
Nov 15, 2010
I have got xorg and gnome-core installed. When I put in command startx I get the following message: X: warning; process set to priority -1 instead of requested priority 0 Fatal server error:Server is already active for display 0 If this server is no longer running,remove /tmp/.X0-lock and start again. when I try to sudo Xorg -configure it shows me same message server is ..... lspci shows me the following information 04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)So what I am doing wrong and how do I get this videocard working with Xorg.
View 7 Replies
View Related
Apr 6, 2010
I have purchased a MCE generic remote from here and it worked out of the box with no problems. I want to re-map a couple of buttons, but that is another issue! I run 9.10 server, with a minimal desktop (fluxbox) and xbmc to serve as a media player. I want to move the server further from the lounge. So I figured a wireless option naturally, until I brought the MCE remote, then I started to think - maybe I could get an IR keyboard and use just one receiver?? googled about and found this which is perfect for what I want. Will it just work "out of the box"? and could I use the same IR receiver as the MCE remote? or vice versa? Could I use the Keyboard IR receiver for the remote? Because I use server edition would I need extra modules? I already have lirc, but this wasn't necessary for the remote.
View 1 Replies
View Related
Jan 14, 2011
How do I set up a PS3 Media Server? I've been trying all day.
View 6 Replies
View Related
Jun 20, 2011
About a year ago I installed Ubuntu Server 9.10 Karmic on a machine at my work to act as a file/print server and ftp host. I managed this with a lot of googling and reading of forums and it's still all working exactly as it did on day 1!
Now I would like to use the server to stream a local radio station through speakers into the workshop. I have again googled but have not managed to come up with a solution for a server sytem with no GUI...
The radio station streams in a m3u format.
View 9 Replies
View Related
Jan 13, 2010
I'm trying to get configured: (domain.com to be used for the purpose of explaining setup)
Root/naked domain (domain.com/www.domain.com) to be setup and configured with Apache/PHP/MySQL. Then radio.domain.com being controlled by IceCast with multiple streams (some live, some MP3 based).
The primary domain is already setup and configured under Apache, and IceCast is already installed, but here is where the problems start showing up.
It's my understanding that Ices2 cannot serve MP3's but only OGG files through IceCast. So just for the sake of testing and wanting to get a sample stream working, I placed a public domain OGG file into /etc/icecast2/music/ and called it "book.ogg."
Then the following are my configuration files: /etc/icecast2/icecast.xml
HTML Code:
View 1 Replies
View Related
Mar 1, 2010
I'me currently try to configure MPD and I have a doubt.MPD clients (sonata et co) are only used to control MDP ?They don't play the music ?
View 1 Replies
View Related
Mar 28, 2010
I just started to play with ssh so I connected to my media-pc with ssh from my laptop. I was always able to start a music player and play the music on the media-pc. Since yesterday the sound is gone. When I do top on the mediapc, I see my player running.
When I open my player locally on the mediapc, I can hear the music.
I think the sound disappeared after a update, but maybe it disappeared because I opened a player locally (on the mediapc) I don't know.
The laptop and mediapc both use a fully updated 9.10
update: when I connect from mediapc to laptop, I can play music on my laptop
View 9 Replies
View Related
Jun 25, 2010
JACK will not run ( eg. the server just won't go! ) When running Rosegarden I can not access the Qsynth/Fluidsynth.In the Rosegarden "manage MIDI devices" menu it now shows ONLY one "General Midi Device" -thats all, and I do not know where to/how to get access to qsynth/fluidsynth to use soundfontsIn manage midi devices I ONLY get the option of "general midi"and then its only through "14:0 Midi through port 0 (duplex)" and no
other channels are available or offered!If I import one of the devices that come with rosegarden ( like Aleisis ) there is no sound.
Also if anyone knows: (& if I can fix the above) how do I set Rosegarden to use a software synth like ZynAddSubFX on the track/channel? External softsynths do not show up, so how do I assign the channel to use them>
Ps: Rosegarden did not install with the help files, even a complete removal and reinstall does not fix this- hats why I may be asking questions which could possibly be in the Rosegarden manual ( but NOT anywhere online that I've found in 3 days of searching- and I'm a research assistant for cognitive sciences- eg: good at researching! )
Here's the JACK output:
First the error:
COULD NOT CONNECT TO JACK SERVER AS CLIENT
-Overall operation failed
-Unable to connect to server
Heres the message window output:
p, li { white-space: pre-wrap; } 10:39:56.296 Patchbay deactivated.
10:39:56.478 Statistics reset.
10:39:56.549 Startup script...
10:39:56.549 artsshell -q terminate
[code]....
View 3 Replies
View Related
Jul 22, 2010
i have been scratching my head and repeatedly banging it against a wall
i have a lan:
m0n0wall router
ubuntu server (headless/no mouse/kbd/speakers, etc in attic)
4 desktop pc's
1 dlink dsm 520
my server is exactly that it has mysql/apache/mediatomb/php/cacti/phpmyadmin/samba/nfs/mpd) ignore all other service running on server & focus on MPD. all 4 desktop pc can connect to mpd and they can see the library. BUT they cannot play any track as it states there was an error with the audio device!i have tried all the examples on the web and none work what do i do? how do i configure it to use the LOCAL soundcard NOT the one that is not present in my server? all the examples are set to use the LOCAL(one on machine running MPD) sound card which does not work until i connect a speaker to my server which again is located in my attic and only has a pc speaker so this is NOT what i want. all 4 desktops do not have mpd installed as they do not need it. all media is stored on my server the gui's that connect to mpd do not have any configuration for a sound card
View 2 Replies
View Related
Jul 22, 2010
I have created a software raid 5 array which is currently sitting idle all space is unallocated. My plan was to use all 4.5 TB as a single partition for multimedia files. My problem is that I am trying to set up a file server acessible to windows systems al well as linux. Is there a file system I can use to partition this space that will geve me what I want?
View 6 Replies
View Related
Jan 8, 2011
I gotta say I know nothing about linux and how it works. I've always been a PC guy(I know, shame, shame). Anyway, I wanted to make my own media server, and for the most part, I seem to of succeed so far. I've learned a ton, but at the same time I'm so lost, and have more questions then answers, and hopefully I'll get some here.
Anyway, the conundrum that I've got is this. I've got my Server set up with Ubuntu 10.10(I think). Got a SAMBA filing system. And then I got Squeezebox to run music off my server. As I dont have an actual Squeezebox I needed to install SoftSqueeze to run the music from the Squeezebox Server address. I then found out that it works fine, but SoftSqueeze sucks when it comes to User Interface. I've tried looking around at other media players and forums about streaming and stuff, but its got me all confused, as I am new to this(going on 2 days now ).
My goal is to be able to stream music to all the users in the household, from the server to there PC. But to do this I'm very lost. I think that I can use a different media player to connect to my servers Squeezebox address... or do I need to get rid of Squeezebox entirely?
View 1 Replies
View Related
Jan 10, 2010
After a Christmas morning scramble trying to get Sims3 working for the kids, I ended up pulling an Nvidia 6200 AGP card out of a perfectly good Ubuntu box and threw it into the kids' PC. I replaced it in the Ubuntu system with an old Nvidia Geforce 2 Ti AGP. From the start I was unable to get any resolution higher than 800x600 with the GF2. Tried removing xserver-org, reinstalling, reconfiguring, etc. Installed the Nvidia legacy drivers, all no luck. Tried booting with a 9.10 live CD and it works perfectly - various resolutions, refreshes, etc. So, the card is capable. I've checked, rechecked, restored, modified xorg.conf to no success.
I'm at a text login now, startx returns (among other info) the following:
dlopen: /usr/lib/xorg/modules/drivers//nvidia_drv.so: undefined symbol: AllocateScreenPrivateIndex
(EE) Failed to load /usr/lib/xorg/modules/drivers//nvidia_drv.so
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available
Fatal server error:
no screens found
Now, I've checked, and nvidia_drv.so is where it's supposed to be (in the drivers directory). What concerns me is the "//" in the directory path string in the (EE) above preceding the driver name - shouldn't this be a "/"? Is the command not able to find the driver correctly? Regardless, at this point my goal is simply to get the system to use whatever process the live cd is using which results in a working GUI. Don't need fancy 3d, etc, just want a working system.
View 6 Replies
View Related
Mar 4, 2010
I've seen Mediatomb recommended but I had trouble setting it up previously. Is there a simple solution for watching stuff on my computer on my TV via the network?
View 1 Replies
View Related
Mar 8, 2010
I have been trying to get webcam-server and webcam_server to stream my webcam but I always get this error when a client connects to the stream get_cam_image(): len != img->bufsize, just letting you know. Anyone have any idea what I need to do to get my webcam streaming with this application.
View 1 Replies
View Related
Jun 19, 2010
One of my friends happens to be a Mac user. When he plays music in iTunes on his Mac Book, he can select that the sound should be played from the laptop speakers or from his remote speakers (i.e. his hifi stereo connected to an Airport Extreme wifi access point). If he chooses to play using the remote speakers, iTunes will stream sound via wifi to the Airport Extreme, which will then output to the hifi stereo speakers.
can I do something similar with Ubuntu/Kubuntu?
I have a setup like this: * I have three laptops running Kubuntu 10.04, Ubuntu 10.04 and Ubuntu Netbook Edition 10.04. * I have a server (fit-PC) running Debian Lenny connected All machines are connected to my local wifi network. The server is connected to some good speakers.
So, what do I need to install/set up on the server and the clients in order to have, say, mplayer, stream sound to the server which will then output it through its sound card?
View 2 Replies
View Related
Jun 19, 2010
I was wondering if it would be possible to set up a server on my desktop that has a folder of videos converted to iPhone formats that I can access with my iPhone over the internet to stream videos to my phone?I started by setting up a server and used no-ip2 to create a domain name so I didn't have to worry about my dynamic ip changing.Then I tried unsuccessfully to transcode a DVD to iPhone format using Arista, Transmaggedon, and Avidemux, none of which I could get to properly work.
Finally I used iUI (URL...) to create a site that would appear as a simple menu to search through my movies on my website and stream them.This failed in that every time I set a static link it would change it to URL...
View 6 Replies
View Related
Jul 15, 2010
I am trying to use rosegarden, but it says "midi fine, no audio". I found a thread with this same issue and that said to instal jackd and a synth. So I installed qsynth and tried to start jackd. When starting jackd i get this error:
10:16:50.399 Patchbay deactivated.
10:16:50.546 Statistics reset.
10:16:51.021 ALSA connection graph change.
10:16:51.287 ALSA connection change.
[Code]....
View 1 Replies
View Related
Jul 24, 2010
I am still having a problem with pulseaudio. When I login I have no sound. I have to click on the pulseaudio applet on the panel and select default server. I hear a sound and I am good to go. Any suggestions out there?I have a related thread, the link is below.HTML Code:[URL]
View 1 Replies
View Related
Sep 3, 2010
Muse will not make sound. The jack server is running, but not from the terminal. I can only get it to run with the Jack control. But it IS running. And still, I hear no sound from muse.Muse is connected to the system in the connection window.So, whats the problem?
View 3 Replies
View Related
Oct 9, 2010
how to stream media securely over the internet from my desktop to my laptop.
I have a ton of movie and tv shows on my hard drive and instead of carrying around a backup of them on an external drive, I'd like to be able to type in a web address to view a list of files available to just stream.
View 6 Replies
View Related
Oct 21, 2010
I'm building myself a light htpc with Ubuntu 10.10 Server without Gnome, but with XBMC and I'd like the ability to stream sound from my other computers to the htpc which is connected to the soundsystem.
But I can't get it to work. Alsa (before I started with Pulseaudio) played the sound from Xbmc. After that I installed pulseaudio, removed my user from the audio-group and added myself to the pulse-access-group. I also tried to set the default alsa-device to pulse (see attached .asoundrc at the bottom) since the default setup didn't work for me. When I try to play a sound file, I get this error message.
[Code]...
View 2 Replies
View Related
Nov 21, 2010
I try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
[Code]...
View 1 Replies
View Related
Dec 4, 2010
I have an Ubuntu 10.04 desktop PC (desktop) that I access remotely, i.e. with no monitor and keyboard attached. I do this by making an ssh connection to "desktop" from my laptop (also running Ubuntu 10.04).
I have all my music stored on "desktop" and I want to play this remotely through the soundcard on "desktop" which is attached to a hi-fi amplifier, from my laptop.
I tried running, say, rhythmbox, on "desktop" through ssh X11 forwarding to my laptop but cannot play music - it says that the right codes are not installed although they are because I can use rhythmbox on "desktop" directly (attaching a monitor and keyboard to it).
View 4 Replies
View Related
Jan 26, 2011
I'm trying to connect idjc to a shoutcast server which is running on a web server (i'm not trying to use a local instance of shoutcast), while idjc is running on my computer.
In the sc_serv.conf file as SrcIP I use ANY, cause I thought I was trying to access the server from another machine.
idjc gives me this output (in a terminal) when I try to connect with the web server code...
View 1 Replies
View Related
Jan 31, 2011
I have 2 monitors, a 22 inch samsung as my main and an acer as my alt. I am trying to get the samsung monitor to display, but is is disabled. So I enable it as a separate x display, then save, but when I restart x, the settings didn't save. I save the config under under /etc/X11/xorg.conf. What am I doing wrong?
View 4 Replies
View Related
