I can't hear what I'm recording in Audacity. Please can someone help/suggest something helpful to solve this problem? I have tried changing the output in the sound preferences panel but this does not work either. I'm using Lucid Lynx Ubuntu.
View 5 RepliesI am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedEvery time I open "sound preferences" from either the sound applet or the preferences menu pulseaudio CPU usage goes right up to 100% and proceeds to lock up the entire computer. pavucontrol, paman, and all the other pulseaudio utils work fine, except for ubuntu's sound preferences. It affects a new account.This is my 10.04 desktop that is affected. I have just the default pulseaudio config.
View 3 Replies View RelatedI have a zoom H2 and I intend to use its usb microphone function.I connected it and it seems to work with xvidcap if I declare /dev/audio1 as the input device. Well.I want to go further and use it for other purposes and before installing jack and other applications I would like to understand why it does no longer appear in the "Sound preferences" under the 'input" and "hardware" tabs as it was the case the day before.
View 1 Replies View RelatedI recently manage to make my microphone "work". I open the alsamixer and i unmuted the mic. Easy!!! But as i can hear my voice through the speakers i can't record. Actually i compare the alsamixer with the sound preferences. And what I notice is:
i)When i mute the output volume from the sound icon in the alsamixer is also muted.
ii)The same when I increase or decrease the volume.
iii)But in the input tab if I mute increase or decrease the volume nothing happens!
I can only mute unmute and change volume trhough the alsa mixer!
I use an Fujitsu siemens amilo pa 1510 with ubuntu 10.10 which I install from a pendrive.
I bought a $400 Dell Vostro V130, and decided to put 10.10 netbook remix onto it. (Vostro V130 owners: after the reboot into the new system, there is no GUI. worse, after log in, a startx means the screen goes dead. fortunately, a power key event is still detected, so reboot still works cleanly. after I did a full apt-get update, apt-get dist-upgrade, and apt-get upgrade, the screen and remix worked.)
I would now like to increase the bass, systemwide (so that ..... gets sound that is a little better). the speaker icon on the top right gets me into sound preferences, but I do not see an equalizer.
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
Is there a way to control the gnome sound preferences widget via the command line? I use optical digital out (IEC95. It works fine. but everytime I reboot there is no sound, I have to go to sound preferences, hardware tab, select my internal audio device, change it from digital stereo duplex to analog surround 5.1, then back to digital stereo duplex, and then the sound works again. I would like to be able to do this via command line so I can write a little startup script and not have to do that every time i reboot.
View 4 Replies View RelatedI have to use alsa for audio to work under wine (otherwise pulseaudio starts eating up processor cycles and the audio comes out horrible and distorted), but I have been unable to use the mic. The mic boost is up on the alsa mixer, and they are not muted. I cannot find any options under my system menu for Sound Preferences (which seems to get references in a lot fo help forums), or anywhere else to determine which audio driver the line in on the front uses.
I'm using an Acer laptop from a couple years ago, so support should be no problem.
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View Relatedscript which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
If I try to change the icon style, it changes the icons in my desktop and in Nautilus, but it doesn't change the icons in the panels nor the ones in the menus.
Some screencaps:
[URL]
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
Does anyone know, where are panel preferences saved? I have several users, and I don't want to edit preferences for each one.
View 1 Replies View RelatedAs title suggest I can't output 5.1 sound with Ubuntu 10.4 which I nevere faced in earlier version like any 9.04 or 8.10,8.04 etc etc.I came from 9.04 to 10.4 and noticed that sound preference has changed which earlier have Windows XP Like long sound panel.My Board is Intel 945GTP which have 3 jack
Green=>Sound Output =>Front 2 channel
Pink=>Mic In =>Center Sub
Blue=>Line In =>Rear Channel
[code]....
I have a brand new pc Running with core i3 and gigabyte H55 S2 motherboard.My problem is the sound output not come with ubuntu 10.04.
Here is my alas info [url]
I have this weird problem; When I change the monitor preferences in the 'System > Preferences > Monitors' dialog, the colors and fonts of much of the text on the screen get messed up. The issue is best seen in the attached figure. All applications seems to run as normal, and there is no other trouble than the visual.
It happens in the moment i hit apply. It happens every single time. The desired changes is applied as they should. To turn my PC back to normal I have to restart it, and then it will start again with the new settings without any problems at all.
The problem occurred for the first time yesterday. I think it may have to do with some updates (advised updates through Update Manager) I have done lately (I tend to mindlessly install most updates). Other than that I have no idea what is causing the problem.
Have anybody experienced a similar problem? Does anybody have a clue of what is causing it, and what I can do to solve the problem? PS: I am running Ubuntu 10.10 32bit on a 5 year old Dell Inspiron 630m.
I have a problem with my sound card Microphone is working, headphones work but with kind of a low audio output, laptop speakers do not work at all. I have checked alsamixer and pulseaudio nothing is muted, tried all sort of different combinations and pulseaudio actually sees that mplayer for example is playing music, or skype is in videocall and using the sound device, but nothing is coming out of the speakers.
Laptop is Sony Yseries VPCYB15AG Alsa-info is [URL] Audio Device is 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) Drivers Loaded are :
[Code]....
Having used Lucid from day one without any problems, lately there have been a few niggles, first the Trash Can disappeared, since been restored, now my Clock preferences on the top panel has gone (You know, the Time, Weather, Location).And as I write this the off / on button has gone walkabout.
View 2 Replies View RelatedAudacity doesn't play any sounds, although it can record from my microphone. And kubuntu plays the startup sounds (BTW, how to turn them off?).
Code:
arho@a91-156-166-231:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
I am not getting sound output from the system... i earlier got it...But after reinstalling I removed Sound applet from the Panel... Hardware is detected as it should be. I think it is because I configured the applet earlier, but as I removed it, I don't know how to restore it...
So tell me how to restore the sound applet as It is not coming in Add to panel menu....
i recently installed ubuntu 10.4 lucid, and i have no sound. also, the sound preferences will not open so i cannot see if anything is muted. there is a sound preferences icon in the pannle, which has a slider that is doing nothing. videos will not work, and there is no splash sound when i start up my computer.
i am also 15 and new at computers, so a simple, or step by step answer or test would be appreciated.
1) the volume preferences is back, i was logged in as root, and now as my account, and preferences are here, but still no sound. it was also not on mute.
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
I installed the vkeybd program to easily create some tunes, but when i push any of the keyboard buttons no sound comes out. I do have sound in programs like vlc. I thought jack and timidity may have something to do with it, but starting and clicking on things in those programs didnt get me anywhere because I dont have much understanding about them. How do I get a sound to come out of my speakers when i press a button in vkeybd?
View 2 Replies View RelatedCurrently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies View RelatedI recently got a new ATI HD 4890 graphics card that supports sound over HDMI. It works in my other OS (Windows 7) but I cannot get it to work in Xubuntu. I read somewhere that by default the open source drivers have HDMI sound disabled. How do I turn it on? I even tried the Comprehensive Sound Problems Solutions Guide and still have no sound.
View 5 Replies View Related