Audacity doesn't play any sounds, although it can record from my microphone. And kubuntu plays the startup sounds (BTW, how to turn them off?).
Code:
arho@a91-156-166-231:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
When i want to record sound it record but the voice is very low.which means i need to turn up for full wolume on both headset and pc when i want to hear it, and it still is very low sound..I've tried.Re-installing audacity changing microphone plug microphones directly to pc instead of through headset.both the 'pink' and blue jacktick port (also with above options)
View 2 Replies View RelatedIm on XP and am trying to get a 9 min piece of music from a cassette on my music centre into audacity on my comp got the line from earphone socket into the blue socket at back of comp (there are 3 sockets in a line then 3 more below them in a line go the line in socket... blue top left. )
Im getting sound ok on the comp with radio, its playing vids etc well so I cant think anything is wrong with the sound card. Playing the cassette on my music centre should get the sound into the comp and into the comp speakers.... but I just cant get a peep
I just installed Audacity and as soon as it's done installing all sounds (speakers and headphones) go off. As soon as I delete Audacity and reboot everything works fine again.
View 3 Replies View RelatedBackground: I'm digitizing an old record. I used Sound Recorder to make FLACs of each side of the LP, and now I need to edit them down to individual tracks. I'm using the development version of Ubuntu 10.04.
Problem: Audacity ignores these FLAC files when I attempt to import or open them.
The FLAC files play if I hover the mouse over them in GNOME.
Audacity gladly imports FLAC files I ripped from CD last year (using Sound Juicer I think).
But when I try to do the same for my recorded FLAC files, nothing happens. I tried running audacity in a terminal window, and there is no additional output when I attempt the import. This comes out when I start it:
Code:
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Looking at the file properties, they're basically the same except the Juicer-generated file has values filled in for title, artist, album, year. They are all FLAC Stereo 44100 Hz. I thought it might be a file-size problem, so I made a 5-second test with Sound Recorder, and that also refuses to import.
So, why do only the ripped files work with Audacity?
I want to be able to record the sounds coming through my soundcard with Audacity. How would i go about doing this?
View 1 Replies View RelatedI am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies View RelatedRunning 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
When I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
As title suggest I can't output 5.1 sound with Ubuntu 10.4 which I nevere faced in earlier version like any 9.04 or 8.10,8.04 etc etc.I came from 9.04 to 10.4 and noticed that sound preference has changed which earlier have Windows XP Like long sound panel.My Board is Intel 945GTP which have 3 jack
Green=>Sound Output =>Front 2 channel
Pink=>Mic In =>Center Sub
Blue=>Line In =>Rear Channel
[code]....
I have a brand new pc Running with core i3 and gigabyte H55 S2 motherboard.My problem is the sound output not come with ubuntu 10.04.
Here is my alas info [url]
I am not getting sound output from the system... i earlier got it...But after reinstalling I removed Sound applet from the Panel... Hardware is detected as it should be. I think it is because I configured the applet earlier, but as I removed it, I don't know how to restore it...
So tell me how to restore the sound applet as It is not coming in Add to panel menu....
I installed LMMS 0.4.5 on my computer (Ubuntu 9.10), but I'm getting no sound output from the program on ALSA, and whenever I try one of the other options (PulseAudio, OSS, etc.) it reverts to dummy audio. I tried installing JACK to correct the problem, but JACK seems to be giving errors and quitting, and in the past I've always used ALSA for LMMS and it's worked just fine.The problem is local to LMMS, even after a reinstall. My audio output is fine for all other programs I've tested the problem for so far.Also, I just noticed that my instances of LMMS are not being terminated after the windows are being closed...
Notable system info:
Ubuntu 9.10 x86 (kernel 2.6.31-16-generic) installed via Wubi
LMMS 0.4.5 (installed via Ubuntu Software Centre)
3.06 GHz Pentium IV (it looks like dual core)
432 MiB RAM
ATI IXP 584x0 High Definition Audio Controller (according to the lshw command
I installed the vkeybd program to easily create some tunes, but when i push any of the keyboard buttons no sound comes out. I do have sound in programs like vlc. I thought jack and timidity may have something to do with it, but starting and clicking on things in those programs didnt get me anywhere because I dont have much understanding about them. How do I get a sound to come out of my speakers when i press a button in vkeybd?
View 2 Replies View RelatedCurrently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies View RelatedI recently got a new ATI HD 4890 graphics card that supports sound over HDMI. It works in my other OS (Windows 7) but I cannot get it to work in Xubuntu. I read somewhere that by default the open source drivers have HDMI sound disabled. How do I turn it on? I even tried the Comprehensive Sound Problems Solutions Guide and still have no sound.
View 5 Replies View RelatedHave started to build a mediecenter with XBMC, but have stoped, because there are no sound after i installed Ubuntu 10.10, using HDMI output, and have also tried all other sound output with no success
MB: ASUS AT3N7A-I
Ubuntu 10.10
Some more info:
my device is >>full aricle : [URL] I am modell : PT014AA#ABA sound was working before on the same version on ubuntu... but after reinstalling it >>>it stoped wprking although I make no changes,adding priveledges to my account...my system is up to date.
View 4 Replies View RelatedFor some reason my soundcard is recording every playback sound. This become apparent when I was trying to make a Skype call and the other people couldn't hear me. I checked my sound preferences and noted that the input was recording what they say (they could hear an echo). Also if I played back anything it would redirect to them. This has never happened to me and I've made a lot of calls in the past.
I tested with Audacity and it records fine, but when I play back the recording, it redirects to the input channel so it's not a problem with Skype. (my soundcard is a VIA VT1708B 8-Ch). Somewhere I read that the output of aplay -l is useful.
Here it is:
I used to be able to use Skype without a problem. I must have played with something as it now doesn't allow me to both use a microphone and external speakers at the same time.I go into sound setting and I am able to test the microphone (works) but then the speakers don't show, if I reverse the tests then the opposite happens.
View 1 Replies View RelatedI have had a problem with none of the microphone inputs working after upgrading to Ubuntu 11,04 64-bit on my Toshiba A665 laptop with 4-core Phenon processor. This includes the internal mic, mic jack and Logitec C610 webcam. All worked before upgrading to 11.04. The broken mic input means no Skype calls.Today I noticed that there was an application called EarCandy that is suppose to add functionality to PulseAudio, so I installed it to see if the auto-detect features would fix my mic problem.
EarCandy completely broke the two apps I tested: Skype and RadioTray. Now neither will output sound. The Ubuntu start-up desktop sound scheme also quit. So it seems that EarCandy killed all sounds that heard while it was briefly installed.How do I get sound output back on Skype and RadioTray? how to fix my mic input issue?
I have updated my Ubuntu to Lucid 10.04 from 9.10.
Although my sound disappeared in 9.10 only, I thought maybe upgrading might help, but there is no change.
I guess everything is installed fine.
But still aplay -l command shows "NO sound cards.. "
Moreover the sound preferences shows no hardware, no input and a dummy stereo output.
I have banged my head a lot trying various things written in forums and all but no success.
One more thing : When I test "osstest" , I get sound in both the earphones , but altogether there is no sound. I am very much confused.
My sound was working, but I got a new SPDIF cable, so I switched it to digital. It worked fine. But then I restarted and now it's gone.
aplay -l tells me I have no soundcard but lspci -v lists
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 836c
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
So my soundcard is there.
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
Does anyone know how I can force single channel sound output? I'm deaf in one ear and want to mix the channels (especially when I need to use headphones).v
View 3 Replies View RelatedI just installed 10.10 and I'm having an issue where sound outputs from the headphones and my speakers simultaneously, and the volume control controls both outputs rather than one of them individually.This has been asked about before at this thread, but none of the solutions I've tried from there have worked. I tried installing linuxant, but it just killed my sound altogether despite uninstalling it afterward. I tried updating the Linux audio modules as per this page but to no avail.I'm running Ubuntu 10.10 (64-bit) on my own custom built desktop, which for what it's worth, contains this motherboard.
View 8 Replies View RelatedSound used to work fine on my computer, but one day my headphone jack stopped working -- when I tried to use it, no sound played through the headphones but did play through the computer's speakers.After I tried to fix it, I lost ALL sound on my computer. I noticed in my sound preferences it says "Dummy Output" and no other hardware.The problem seems common -- I've Googled the issue to death and read many threads here about the same problem -- but no matter how many times I've tried, I can't find a solution that works for me.I'm relatively new to Ubuntu and so there's still a great deal of stuff that
View 1 Replies View Related