Using Lucid,Rhythmbox,when I insert a compact disk,instead of getting the audio cd icon on the desktop,I get.
Unable to mount audio disk.DBus error freedesktop.DBus.Error.NoReply.:Message did not receive a reply.(timeout by message bus)
Yes,all the hardware connections are correct.
I'm totally unable to play or mount audio CDs and unable to use video DVD's on my box right now. When I insert an audio CD I get a dialog box saying:
Unable to mount disc: Location is not mountable
and if I check messages in the Log File Viewer I see the following text repeated (save for the last line) a couple of dozen times.
Code:
May 24 13:04:37 Amber kernel: [ 6680.434685] sr 0:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 24 13:04:37 Amber kernel: [ 6680.434691] sr 0:0:0:0: [sr0] Sense Key : Illegal Request [current]
May 24 13:04:37 Amber kernel: [ 6680.434695] sr 0:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[code]...
on a similar but ultimately unrelated thread someone was asked to enter a few commands so I tried them and the following was the output:
Code:
main@Amber:~$ ls /dev/scd*
/dev/scd0
main@Amber:~$ sudo mount /dev/cdrom /media/cdrom0
[code]...
An error occurred: Could not open location; you might not have permission to open the file. As far as I can tell I have the relevant CSS libraries installed I'm lost without being able to play CD's and DVD's on my system.
I can't mount my Ubuntu partition. I was using my PC when it suddenly crashed, so I rebooted. When Ubuntu started again, it said that it was mounting, but I rebooted again. So, now when I start it tries to mount the main partition but it can't. Then appears <initramfs> and I don't know what to do.
View 4 Replies View RelatedI need to mount an audio only image file. The only program I'm aware of is cdEmu, unfortunately, since my upgrade to 11.04 x86_64, It was removed during the process. Any other programs/commands capable of mounting an image file? And no, I do not want to burn,extract, or convert. Just mount.
View 2 Replies View RelatedI am having a rather strange issue. I have windows 98 installed into a disk image that I use bochs to boot it with. I want to transfer some files to the image but now I am unable to mount it. I will attach the drive to the loopback device but when I go to mount I get wrong fs type bad option ... etc.
The command I used to mount was
Code:
#mount -t vfat /dev/loop0 /media/loopdisk
cfdisk shows it ok as does fdisk. shows as a fat16 file system. When I attempt to check it for errors using fsck.msdos I get
Code:
# dosfsck 3.0.6 04 Oct 2009, FAT32, LFN
# Logical sector size (64543) is not a multiple of the physical sector size.
When I boot into windows 98 in bochs and check the disk it tells me there is no problems.
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
hi, I'm having a massive problem getting my audio CD's to play since upgrading to 10.04.Whenever I try them I get the following message:Unable to mount disc: Location is not mountableWhen I check the System Log/messages I see the following repeated over and over...
Code:
May 20 22:09:36 Amber kernel: [ 572.797722] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[code]....
I am currently running Intel DG45fc Mobo. works great with Ubuntu thus far. However when connecting to my LCD through HDMI I can not receive any sound.
View 3 Replies View RelatedI am unable to play audio CDs. I have 2 CD drives and upon insertion of of a CD into the top drive, it notices the CD and asks what I want to do... Play with Kaffeine results in it opening, but then nothing happens. When I do the same thing with the CD in the bottom drive, it plays the first track of the CD but nothing else. Every time. With different CDs.
View 1 Replies View RelatedI am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
For the longest I have been unable to burn an audio CD that contains ogg files with GnomeBaker, and have always had to decode to wav manually. Well I'm tired of doing that, so want to get to the bottom of the problem. Upon adding an ogg file to the file list, the error I receive is:
"The plugin to handle a file of type audio/ogg is not installed." I have all the gstreamer0.10-plugins-[base|bad|good|ugly] packages installed. I can play an .ogg file with rhythmbox.
Using gconf-editor, /system/gstreamer/0.10/audio/profiles/cdlossy is "active" and the cdlossy profile is listed in /system/gstreamer/0.10/audio/global/profile_list At a loss on what I need to do.
I'm using latest version of ubuntu 10.04.
Sometimes when i play a media file i get this error :
Code:
"An error occurred : Failed to connect stream: Too large"
I have all the codecs installed.None of the player totem,vlc plays them.
I recently installed openSUSE 11.4-64bit on my Gateway desktop, and I can't seem to get my mic work at all. The mic is built into my Microsoft LifeCam Cinema webcam and works fine when I boot into Windows. The mic will not record sound in krecord or lame and doesn't work during Skype sessions.
According to the literature for the device driver my the mic should be supported, and that is evidenced by the fact that the mic shows up as a capture device in in kmix. I have made this mic the master channel under capture devices and I have given it highest preference amongst my capture devices in both the Communications and Accessibility categories of kmix's Settings/Audio Setup.
There was a very similar case solved in January:
How I got my Sound Input working
I've done my best to implement these fixes, but half of it looks like gibberish to me. All I was really able to do was update my alsa software and generate this comprehensive alsa.conf (its long, so I'll wait to post it until asked).
I've had since updating to 11.4, and I gotta say: I've been really impressed so far.
I got a new ipod touch the other day and have been unable to get anything to read it properly. it automounts just fine and i can browse the file system. Normally with my old ipod i just used gtkpod and it worked fine. With gtkpod you have to tell it where the ipod is mounted. The problem is that i cannot see where the ipod touch is mounted It is connected right now and i can see it in nautilus and i can browse the file system, however...
[code]...
Partition table entries are not in disk order. what the?
Just did a fresh install of Karmic, got all necessary decoders installed for video and audio playback...I think.
Problem is I can't forward/search in audio files I am playing. I mean I can only Play, Pause, Stop or "Next-track" a music file. Video files are fine.
I've tried Exaile, Rythmbox and even Totem. It is like the audio files are "half read-only".
If I drag a horizontal scroller in the music player and let it go, it will only jump back to the position where it is actually playing.
Has anyone experienced, this? I am a missing something in gstreamer or something like it?
I've got Ubuntu 10.4 and have been using Rhythmbox to play CDs. When I put a CD in it would always be recognised and Rhythmbox would display the artist and song titles. Today I installed the following package:ubuntu-restricted-extrasThis was so I could rip CDs to MP3s. This worked, however it seems to have also had the side effect of preventing Rhythmbox from retrieving information about audio CDs. If I run Rhythmbox from a shell I get the following debug:
** (rhythmbox:2271): DEBUG: Loading the real store page
** (rhythmbox:2271): DEBUG: navigation requested to https://one.ubuntu.com/music/store-no-token
[code]....
I have a Acer emachine E732z laptop. I have installed debian squeeze gnome, but it is unable to play audio through laptop speaker. The (3.5mm)audio jack is working fine and I can play audio through it. I have also installed Linux mint, but no audio(in speaker and audio jack). There is no such problem in Windows7.
View 1 Replies View RelatedI am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies View RelatedAfter I installed Ubuntu 10.10 on my laptop, when I plug in my Ipod touch second generation 8gig* I get this message
"DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus)"
I've searched the forums, and tried a lot of different things, and nothing has fixed this problem.
I Tried to play video files (.avi & .vob) in Kaffeine, but was unableo hear any audio. Then i went to the packmn site and installed the packageom there, with no positive results.After that i installed VLC and then tried playing.
View 2 Replies View RelatedDBus error org.gtk.Private.RemoteVolumeMonitor.NotFound: The given volume was not found
I get this message when one mp3 players gets fully charged.
I'm trying to mount my Galaxy S android phone to my Ubuntu 10.10
'Unable to mount SAMSUNG_Android'
What am I missing?
When I install a commercial audio into the CDROM drive I get th following: Unable to mount Audio Disc DBus error org.freedesktop.DBus.Error.InvalidArgs: Mountpoint Already registered
View 1 Replies View RelatedRecently updated KDE to the last version available, v4.6.4. Apparently Dolphin lost the ability to mount ntfs/fat32 volumes. It was working great with 4.6.3. I'm getting this error while trying to mount an external HDD formatted as NTFS:
An error occurred while accessing 'LaCie', the system responded: org.freedesktop.UDisks.Error.Failed: Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
i jsut installed opensuse kde and xfce and i cannot mount dvd/cd 's. i am using opensuse 11.3 32 bit. i added my user to the cdrom drive group but still no luck. How to get the cd to mount by jsut clicking on the dolphin icon?
View 9 Replies View RelatedI get this error when I try and mount a WD Passport external hard drive. Has anyone run into this before?
View 14 Replies View Relatedbanshee seems unable to recognize and mount ipods. once connected they are seen by nautilus (and songbird) but not banshee..
View 4 Replies View Relatedi plug my camera into my laptop and it won't mount the camera's memory, when i plug the memory card directly to the laptop it mounts without problems.
1) a good DIVx/ wmv and DVD movies player?
2) audio/ mp3/ wav player
I have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View Relatedi have opensuse 11.3 (64-bit) installed. kde version. my sound card is a creative labs sound blaster x-fi xtreme audio, pcie interface. i am able to listen to cd music without any problems but i am unable to get streaming audio when i visit any internet radio site, videos, yahoo!tv, etc. etc. for instance, when i visit videos, the video part is ok but i cannot hear anything through the speakers. something similar happens when for instance i go to [url] and select any of the music channels. a new window pops up but the music never even starts to stream.
i know for a fact that both sound card and speakers work fine because i've tested them with windows xp. so there must be some setting in opensuse that i've missed. the weird part is that i can listen to music cds without any problems...