OpenSUSE Multimedia :: Unable To Capture Audio From Mic?
Jun 5, 2011
I recently installed openSUSE 11.4-64bit on my Gateway desktop, and I can't seem to get my mic work at all. The mic is built into my Microsoft LifeCam Cinema webcam and works fine when I boot into Windows. The mic will not record sound in krecord or lame and doesn't work during Skype sessions.
According to the literature for the device driver my the mic should be supported, and that is evidenced by the fact that the mic shows up as a capture device in in kmix. I have made this mic the master channel under capture devices and I have given it highest preference amongst my capture devices in both the Communications and Accessibility categories of kmix's Settings/Audio Setup.
There was a very similar case solved in January:
How I got my Sound Input working
I've done my best to implement these fixes, but half of it looks like gibberish to me. All I was really able to do was update my alsa software and generate this comprehensive alsa.conf (its long, so I'll wait to post it until asked).
I've had since updating to 11.4, and I gotta say: I've been really impressed so far.
View 9 Replies
ADVERTISEMENT
Jun 1, 2011
I need to capture from my webcam. It has a mic too.I can specify video input device as /dev/video0.I specified input audio device as /dev/dsp2 ( OSS device, corresponding to USB Webcam), Now VLC throws an error, "VLC is unable to open the MRL 'alsa:///dev/dsp2'. Check the log for details".Thinking it wants an alsa device, I specify device as /dev/snd/pcmC2D0c. (got it from kinfocenter and dolphin). Now again an error, "VLC is unable to open the MRL 'alsa:///dev/snd/pcmC2D0c'. Check the log for details.".I try with any device, the same error. I have added myself to audio device so that I can read/write to the mentioned devices.I see no way of switching VLC to use OSS. And I see no information (documentation on net) on it's expected device listing for audio.
View 5 Replies
View Related
May 16, 2011
I'm trying to capture my desktop screen and audio , before I used xvidcap but after upgrading my system I can not use it and also recordmydesktop anymore these APPs hanged when I try to use them.Now I try to use recorditnow via ffmpeg recorder interface , it work properly in recording the desktop but it does not record the sound , so I tried to add below options to its command -f alsa -ac 2 -i hw:0,0 but it just record sound at the beginning and just for 1 second. Also when I try to capture my desktop with ffmpeg directly from command line with below command I face with same problem!!! ffmpeg -f x11grab -s 1024X768 -r 30 -i :0.0 -f alsa -ac 2 -i hw:0,0 ~/out.mpg
View 9 Replies
View Related
Apr 6, 2010
I'm using openSUSE 11.2 KDE on a Fujitsu-Siemens Amilo Pi 1536 laptop. My problem is that my microphone (I'm attempting to use a 3.5mm headset) doesn't work. Audio playback however does work through the built-in speakers and headphones.
I have gone through the SDB:AudioTroubleshooting - openSUSE as suggested by oldcpu on the Welcome to multimedia sub-area sticky.
I have tested audio recording with
Code:
arecord -vv -fdat foo.wav resulting in a silent recording. The vumeter showed 0% during the recording.
Here is my url produced by the alsa-info script:[URL]
rpm -qa '*alsa*'
Code:
alsa-plugins-1.0.21-3.3.i586
alsa-1.0.21-3.2.i586
alsa-oss-1.0.17-25.2.i586
alsa-devel-1.0.21-3.2.i586
[Code].....
View 10 Replies
View Related
Jan 10, 2011
How I would capture on-screen audio AND my webcam audio at the same time.(My webcam seems to rely on pulse).
View 1 Replies
View Related
May 13, 2011
I am unable to capture sound from the sound card. I used to be able to do this with ease in SuSE 10.0 and 11.2. Now I have 11.4 and not only do I NOT have access to the sound card's channels (for base, treble, turning the mic on/off, and line in, Analog Capture Boost, etc) but now I can't seem to get at the settings for capturing sound coming from the sound card. I have tried using the Alsa mixer by way of the terminal and went to the Capture section and turned all of the settings all the way up. I didn't see any settings for Capture Boost as was available with 11.2's Alsa mixer GUI. Here's more of my info:
[Code]...
Isn't there ANY GUI sound mixer available that will give me access to all the channels I require? I not only record sound from my sound card, but I also use my mic at times for Skype and I like to be able to turn it off when not in use, rather than unplugging it all the time. I used to be able to do this with 11.2 and 10.0 and I really liked it that way. BTW, the plug for the mic is in the back of the computer and it's not convenient to have to plug/unplug it from there each time. For some apps, it's just a good thing to have all the sound settings done and in place before starting up the app. This I cannot do right now because of the changes to KMix and the Alsa GUI. I really really don't like this at all.
View 9 Replies
View Related
Oct 20, 2015
So I got myself a USB capture card (EasyCap) to use for capturing gaming, digitizing my kids' old VHS movies, etc. It works fine, I've been using VLC to view and record stuff from it, but I've noticed one issue. When recording streams via VLC, even with no other programs running to give VLC as much CPU time as it wants, the audio slowly falls out of sync. I've tried the MP4 (H264/MP3) container and the OGG (Vorbis/Theora) container.
Early on you can't hardly tell, but the further into a movie you get the more out of sync the audio gets, so that by the end of the movie the audio is a good 1-2 seconds off. It's not a set amount either so I can't just split the audio to a separate file then shift it one direction or the other to make up for the difference, because like I said, the offset starts out at nothing and gets progressively larger as the movie goes on. When I select "display locally", the video/audio that is displayed stays in sync, only the video/audio that gets committed to the output file falls out of sync, and it doesn't matter if I play the file with Totem or VLC.
View 3 Replies
View Related
Apr 3, 2010
I want to record some streaming internet radio talk shows and music performances on NPR, and I'm wondering what my options are in Ubuntu. I'm looking for something that can output high quality lossless files in several formats, hopefully including mp3 and ogg.
View 6 Replies
View Related
Apr 18, 2011
I'm looking for configuring a Ubuntu box, we need to capture alsa output into ffmpeg with jack or OSS but not pulseaudio, as that tends to glitch badly. We have things working, but we are sort of hacking around in the dark, we play music, but as we aren't linux audio experts ourselves.
View 1 Replies
View Related
Jan 17, 2011
This plays fine in VLC, and there's a "Record" button there but I'm never prompted to save the recording anywhere. I wandered through preferences but didn't see any default capture directory fields.Where/how do I capture the stream for playback later? The docs that I've stumbled across so far are pretty outdated (but I'm still googling).
View 8 Replies
View Related
Dec 9, 2010
I am not able to burn audio CDs with Brasero 2.30.1, which uses cdrdao 1.2.3 However, Opensuse 11.3 comes with cdrdao 1.2.2 I don't feel comfortable replacing the version myself. Is there any plans to update cdrdao for Opensuse any time soon? PS: I am running Gnome in Opensuse 11.3
View 2 Replies
View Related
Jan 19, 2010
I Tried to play video files (.avi & .vob) in Kaffeine, but was unableo hear any audio. Then i went to the packmn site and installed the packageom there, with no positive results.After that i installed VLC and then tried playing.
View 2 Replies
View Related
Sep 20, 2010
I am fed up of listening to my (Windows XP) gaming computer through headphones so I want to get it hooked to the stereo.
Rather than use a heck of a lot of wire, I can sit my Ubuntu 9.10 netbook on top of the stereo and stream the audio across WiFi.
So, ideally what I am after is something to capture the outgoing audio on the Windows computer, stream it across the wifi to the Ubuntu netbook and finally play it through the speakers.
View 2 Replies
View Related
Nov 6, 2010
I'm trying to get a USB video capture device to work. According to lsusb the device is code...
View 2 Replies
View Related
Aug 13, 2010
What is the best analogue capture program please to capture Austar.
View 1 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Jun 8, 2010
i have sound but my mic capture seems to be not working in skype or well anything else and I'm confused on what to do after searching. It's an integrated mic somewhere in my laptop. I enabled capture in Kmix but that didn't seem to do anything.
[Code]....
View 6 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Nov 24, 2009
Does anybody know what has happened to Kino - the video capture utility? Used to be packaged by packman for Opensuse but doesn't seem to be available for 11.2.
Is there an alternative I can use for video capture - or has packman just not gotten around to adding this yet?
View 1 Replies
View Related
May 30, 2011
Is there any way to prevent Flash from capturing all keyboard input? I'm really sick of not being able to ctrl+l or ctrl+tab just because I'm watching a video, and today a video froze in fullscreen mode and I couldn't even ctrl+f1 to any terminals or ctrl+backspace to kill KDE. It would be awesome to stop flash from grabbing certain key commands and pass them to the browser or OS instead.
View 9 Replies
View Related
Aug 6, 2010
I am trying to record a test video with my built-in webcam, using Cheese. However, after I click "Start recording," the Cheese screen turns black, and Cheese seems to hang. I can click "Stop recording" sometimes -- then I get a split-second video clip. But mostly it just hangs until I force quit.
I'm on an Asus 900HA. I could record video clips on using eeebuntu and Cheese. Is there a setting I need to check?
View 8 Replies
View Related
May 18, 2011
I have been searching for an answer through most of the recent posts about sound issues but have not been able to find a solution. I am currently unable to capture sound from the "Line" input on my sound card. I do have sound and is working correctly for all applications and I do have P/A disabled (I'm not a huge fan of the sound quality with P/A enabled). I have checked and re-checked many settings but to no avail have not been able to capture sound. I'm sure I may be missing something or have not done something in order for this to work. I was using openSUSE 11.4 on a different pc and had no problems, unfortunately this is a different pc with a different sound card which is on-board so I am not entirely familiar with it yet.
It is a C-media CMI9880 which shows up as a Intel HDA (ICH6) and appears to be configured correctly.
View 9 Replies
View Related
Mar 22, 2011
I have two sound devices, an internal audio device on my motherboard and an external USB devices, which came with my headset. After upgrading to 11.4, the microphone on my headset ceased to work with my softphone. As it turned out, the softphone used the standard input device, which was defined in the Phonon tab in the KDE System Settings. Unfortunately, when I put the USB Device on top of the default input stack, it doesn't stay there. When I apply the changes and leave the Phonon tab or even enable "Show advanced devices " the stack always resets to its initial order. I was unable to find any kind of config file where Phonon saves this settings.
View 4 Replies
View Related
Mar 9, 2010
I'm trying to get skype going in Fedora 12 KDE x86_64 (fully updated). I did some testing with and without the pulseaudio server installed. With the pulseaudio, I didn't manage at all. I know I got it working before _without_ pulseaudio, but after a yum update the pulseaudio got reinstalled and the mic stopped working. Now I traced this problem down to what I think is wrong: I have a HDA Intel sound card, but 'cat /proc/asound/devices', doesn't show me any analog capture input at all:
cat /proc/asound/devices
2: : timer
3: : sequencer
[code]...
View 1 Replies
View Related
Apr 24, 2010
Running 10.4 Luci RC 64-bit desktop and when attempting to run Applications > Sound & video > Sound recorder, I receive the following error message:
Quote:
Your audio capture settings are invalid. Please correct them with the "Sound Preferences" under the System-Preferences menu. When I do go to System > Preferences > Input, there is only 1 device - "Internal Audio Analog Stereo" with no options for modification.My laptop does have an internal microphone but it apparently isn't working as nothing was recorded when I ran a Skype test call. This is the reason why I attempted to record something to check the mic.
View 1 Replies
View Related
Nov 16, 2010
I have this file:Code:vid-gd-19940626-peggy.rmI would like to extract the audio and copy to a file to burn on a CD.'pitivi' will load the file and show the audio timeline. But I can not find a save or copy button.'vlc' will play the file but I can not find how to seperate/save the audio.I found a 'ffmpeg' that is suppose to read whatever is being sent to your speakers.Code:ffmpeg -f oss -i /dev/dsp -f video4linux2 out.wavThis produce a file that 'mplayer', 'vlc', 'audacity' will load but it is empty of useful data. Black screen only.This is the second week I have worked on this. Either I'm googling for the wrong words or what I'm reading, I don't understand.
View 4 Replies
View Related
Mar 24, 2010
I'm looking for one or more command-line applications to capture and record some Internet audio streamings (Winamp, Windows Media and Real Audio type).For Winamp streamings I tried streamtuner and it works good, but it does not support Windows Media eal Audio streamings.I have to call the commands using the command line, because I need to use them in batch mode.
View 1 Replies
View Related
Apr 21, 2010
I basically want to record audio streams. The most useful purpose is to record conversations on skype (and other applications). This is for a legitimate reason if anyone is worried; I often have long conference calls on skype (an another voip collaborative tool called EVO), and a recording would be a nice way to keep minutes and participate in the working meeting. I'm not worried about capturing video yet. The audio is the important for me for now. This is going to display my woeful ignorance of Linux audio systems. I'm running F12 x86_64 on a Dell inspiron laptop. I believe that the system is using the PulseAudio sound server.
I thought something like:
ffmpeg -f oss -i /dev/dsp sample.mp3
Could work, but I don't have a /dev/dsp. I think these are in a separate directory /dev/snd; however the content of this directory is not clear which device is the appropriate one. I tried pointing ffmpeg to a few of them, but it resulted in errors thus:
/dev/snd/hwC0D0: no such file or directory
I know it's there because [tab] complete. I found another alternative which uses parec.
parec --format=s16le --rate=44100 -channels=2 sample.raw
Unfortunately this only records the microphone input and not everything else going through my sound server. I wish I could find the link again, but there was a third alternative which required writing a bit of C code. I thought that could be a nice little project to better acquaint myself with this stuff.
View 9 Replies
View Related
May 20, 2010
hi, I'm having a massive problem getting my audio CD's to play since upgrading to 10.04.Whenever I try them I get the following message:Unable to mount disc: Location is not mountableWhen I check the System Log/messages I see the following repeated over and over...
Code:
May 20 22:09:36 Amber kernel: [ 572.797722] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[code]....
View 1 Replies
View Related
Jun 24, 2015
I use Firefox 99% of the time but what did you all think about this?
Audio capture of microphone allowed from Google Chrome.
[URL] ...
View 2 Replies
View Related
