Ubuntu Multimedia :: TwinView Plus USB To VGA?
Jan 17, 2011
I have a GeForce 7200GS graphics card which I've been running in TwinView mode driving 2 IIyama E431S monitors.
I wish to move up to 3 monitors and acquired a USB to VGA adapter but can't get the new monitor to work. I have followed this [URL] and modified the xorg.conf. See below:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Tue Nov 4 14:07:17 PST 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Mon Nov 3 08:46:46 UTC 2008
[Code]....
View 4 Replies
ADVERTISEMENT
Jun 18, 2010
i have some issues running twinview through my laptop and an additional monitor. i currently have the nvidia settings such that the monitor is the primary screen. however, whenever i click full screen in videos or another application, it maximizes in my laptop screen. also - when i maximize videos videos, the screen fills up, but the actual video size doesn't tend to increase (it doesn't stretch to fit). is this an adobe problem? ubuntu 10.04, nvidia driver v195, dell latitude d630 laptop.
View 2 Replies
View Related
Aug 22, 2010
I have 2 nvidia graphics cards and 3 monitors. One graphicss card is an nvidia 460 and the second one is an nvidia 8400 GS. I'm on Ubuntu lucid 64 bit gnome desktop. I use the nvidia drivers . 2 monitors are connected to the 460 card setup as twinview the last monitor is connected to the 8400 GS set as a separate xscreen.
When I now maximize a window on the 2 monitors which are set as twin view it expands this window gets stretched over both screens. I would like to know how I can set it so that an maximized window get only expands on the current screen in twinview so that I can still move windows from 1 screen to another.
View 1 Replies
View Related
Mar 26, 2011
I'm trying to use an external monitor to watch movies on my linux box (kubuntu maverick) but it results always out of sync. TV-out refresh rate is locked as you can see on the image i've attached right here. This is the output of the nvidia-settings query about the variable RefreshRate:
Code:
Attribute 'RefreshRate' (DeepBlue:0.0; display device: CRT-0): 60.02 Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
[Code]....
View 3 Replies
View Related
Dec 28, 2010
Is it possible to run TwinView with more than 2 monitors.When I try, it seems to recognize the 3rd monitor, but will allow allow them to be configured as separate X screens.
View 4 Replies
View Related
Mar 27, 2010
I have connected my TV (and my regular screen) to my Ubuntu 9.10. I use TwinView, and that works just fine. I have also installed Moovida (I love that program). And I would like my PC to open Moovida on startup, but I need it to be on the TV screen.
View 1 Replies
View Related
Jun 17, 2010
I have no idea what to do to get Twinview to work. I had found a bit of code to paste into the xorg.conf file but after I pasted it in and restarted my computer, but it wouldn't boot up. Whenever I open up the "Monitors" dialog under System>Preferences, it doesn't even see that the second monitor is there! It doesn't matter if I go to the default tool or if I go to nVidia's tool. On the nVidia tool, under X "Server Display Configuration", there is a button "Configure...", when I press it, it asks "How should this display be configured?". The options "Twinview" and "Disabled" are both unselectable and the only one that I can select is "Separate X Screen". It's almost like my computer doesn't know that I have a second monitor plug.
I am running Ubuntu 10.04.
My xorg.conf:
Code:
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Option "NvAGP" "1"
[Code]....
View 9 Replies
View Related
Nov 11, 2010
Recently i've installed 10.10 and have a problem with flickering screen on VGA. I have 64-bit release, ge force 210, nvidia propietary drivers and two monitors:
- AOC_1920*1080_60_DVI
- Philips_1280*1024_75_VGA
- nvidia-current, 260.19.12, 2.6.35-22-generic, x86_64: installed
No matter which monitor is attached to VGA, it flickers randomly every couple of minutes. Sometimes it flickers when i use mouse or keyboard, but sometimes it flickers by itself.
View 3 Replies
View Related
Feb 4, 2011
Here is my question:
I recently installed Ubuntu 10.10 (32bit) on an HP compaq nc6400 laptop (internal display is 1280x800, graphics card is an Intel Mobile 945GM/GMS, 943/940GML Express) which I am using in three situations: In my office: external monitor (1280x1024), laptop in docking station with lid closed At home/on travel: as it is, without any external monitor When giving lectures: with projector (1024x786), lid open, same output on projector and internal display As you see, I either want one output device only or both showing the same output. Additionally, I want to run compiz. My problem is that, whenever I (1) connect an external display or (2) when I press the Fn+F4 key to change displays or (3) sometimes even when I open/close the laptop's lid, the system at some point switches to TwinView which seems not to work with compiz on my system. The effect is that compiz is deactivated. When I want to have it back, I have to open the appearance settings and change to extra visual effects again. Unfortunately, that reverts compiz to default settings and I have to adjust my compiz settings again. note that compiz works properly in all three situations I listed above. The problem is "only" that, at some point, it switches to TwinView.
Is there a way to tell X or compiz NEVER TO CHANGE TO TWINVIEW?
View 4 Replies
View Related
Apr 18, 2011
I am having issues maximizing windows/applications on triple monitor setup. I would like to maximize wine, folder explorer, media players, and etc to one screen, instead of across both, which it is currently doing that. Using Separate X [xinerama] + twinview, but I have also tried without xinerama + twinview. When maximizing applications and such, it will only maximizes across both of the monitors in the twinview setup, not the separate X on the left. The separate x has maximizing working to that one screen. I have tried to add xorg tweets, but that's not working, and they are currently in my xorg post below. I had maximizing to one screen working perfectly with dual monitor setup. :S And, I am currently getting an error about " Xlib: extension "RANDR" missing on display ":0.0""
The following Xorgs show the differences, I guess if there is one between maximizing correctly to one screen.
Triple Monitor setup, maximizing across both twinview monitors, not preferred:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
[Code].....
View 3 Replies
View Related
Jun 28, 2010
Im running a dual monitor setup in gnome, with the closed nvidia drivers in twinview mode. most of the times i want to be able to maximize windows to a single monitor (this is the default behavior in 10.04 lucid i believe), but sometimes i want to span a window on both screens. compiz doesn't allow windows to resized past screenborders, and gdevilspie wasn't able to get past this.
After a lot of googling and toying around i came up with the following sollution, i'm posting it here so other people can enjoy it as well (and i'll be able to find it again after my next install).
I made a script to switch between the streched mode and the doublescreen mode to use it, you'll have to stop the autodetection of the outputs in compiz. this option is found in compiz config settings manager under general settings > display settings or though the gconf-editor in /apps/compiz/general/screen0/options/detect_outputs
This script switches between the two modes, but you need to edit the resolutions of your monitors! (i have a double 1280x1024 setup)
Code:
My way of using this:
1. use the script to switch to the span mode
2. start photo/video edit software
3. work
4. close the software
5. use the script to switch back
View 4 Replies
View Related
Jul 1, 2009
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
View 1 Replies
View Related
Feb 24, 2011
I'm running the latest versions of openSUSE and KDE with latest updates installed. I have an nVidia GTS 250 video card with two monitors hooked up. Initially SUSE recognized my second monitor just fine. However, after installing nVidia's own driver (to quiet the loud noise of the card's fan on high) following these instructions, my monitor is only usable after I go into the nVidia X Server Settings (from terminal, as root: "nvidia-settings") and configure it to TwinView.
All is well and good (I can move windows over to monitor 2), except that monitor 2 has no wallpaper (I'm new to KDE, does this mean that monitor has no desktop activity?) and the X Server configuration is not persistent. When I reboot I have to change the X Server settings back to get monitor 2 recognized again.
I tried looking for the X Server configuration file (xorg.conf, right?), in order to replace it with the edited version, but could not find it.
View 2 Replies
View Related
Jun 4, 2010
I have 32-bit Windows XP and Centos 5.5 x86_64 on my dual-boot PC, equipped with two generic LCD monitors, Dell (primary) and HP (secondary). I have been running dual screen displays without any problem when running Windows, however no luck getting them to work when I boot up with my newly installed Centos 5.5
In both Gnome and KDE both monitors light up, but secondary monitor (HP) is just a clone of the primary. I have tried setting "Dual Head" in the Display adminitrator but the resulting xorg.conf causes a "Entity is already in use" error and crashes. I have also tried just adding Option "TwinView" "on" but it does nothing. (Are "Dual Head" and "Twin View" exactly the same concept?)
What I am doing wrong? I checked the FAQ and did not find any similar problems being discussed.
Below is my getinfo.sh driver info
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5.centos.plusxen x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
[Code]....
View 14 Replies
View Related
Dec 15, 2010
I am currently running ubuntu 10.10
I have a panasonic 50" and a samsung 23" both of which are 1080p displays. I have twinview setup so that the samsung is my main and the panasonic plasma is my secondary. For some reason every time I open a windows of lets say mozilla and it was maximized prior to closing before, it will "jump" (briefly display on the samsung monitor for a split second and then automatically move to the plasma) from my main display to the secondary panasonic plasma. If mozilla was minimized before closing prior and I reopen it will open to the samsung in the state it was in on the prior close (aka minimized), which is fine. Only when it was maximized prior does it "jump" to my secondary display.
How can I correct this issue? I would like to have programs open (and stay) in the display they were launched in whether it is the plasma or the samsung.
xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
[Code]....
View 1 Replies
View Related
Aug 22, 2011
I'm running Ubuntu 11.04, using an nVidia graphics card. I have my TV hooked up to my computer and acting as a second monitor, using the Twinview option with the gpu. My monitor is set as the primary display, with the TV as secondary.
The problem I'm having is that when I turn my computer on, the main display is black, and all the load up information is output to the second display. Then, when I get to the log in screen, it is also on the second display.
View 7 Replies
View Related
Dec 17, 2010
I am posting this to see if anyone else has had an issue with Vmware Workstation 7.1 using unity mode with a Linux Host. The issue I am having is when I try to move a window from my virtual machine in unity mode the screen crashes and then disappears. Everything seems to work while not in unity mode. I have tried various thing like disabling 3d mode in VMware, disabling various KDE effects. I only have these problems with a dual monitor setup, if I switch to a single monitor everything works just fine.
[Code]....
View 1 Replies
View Related
Feb 15, 2010
I frequently watch movies on my computer, but I have two screens. So having something displayed on the other monitor is annoying.
I currently use this to turn off my monitors:
xset dpms force off
I was wondering if there's any way to turn off monitors independently, without having to physically press a button on the monitor, of course.
A program that tells the other monitor to display nothing but black would suffice, but I'd really prefer not to waste the power.
I also have Nvidia TwinView, so applications like grandr aren't aware of both monitors as being independent.
View 1 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Jan 28, 2010
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
View 3 Replies
View Related
May 9, 2011
so i don't know what happened, but all multimedia files are suddenly speed up/and-or with no sound (ubuntu 11.04 with all recent updates, firefox 4, adobe flash-instick etc.)
if i try to play a flash movie on for instance videos it's sped-up with no sound, if i play an mp3 song (i use exaile) the bar is sped up and there's no sound either, if i start an avi movie (vlc) it's not sped up but there's no sound though.
when i log in to the system the logging in jingle is not playing, so basically the sound just got turned off for some reason but according to the soundbar it should be on.
this problem started just recently. i don't know if it has to do with recent updates or that my log in re-started a couple of times after using a kde program (kmess).
View 4 Replies
View Related
Mar 16, 2010
Is there any multimedia file format converter which can convert .mov to .flv on Ubuntu.
View 2 Replies
View Related
Mar 19, 2010
Is there a way to allow the multimedia keys to function while the system is locked?
View 2 Replies
View Related
Apr 11, 2010
Install multimedia plugin for browsers *and* keep firefox removed, is possible have such simple thing?
View 1 Replies
View Related
May 10, 2010
I set up up Ubuntu 10.04 Lucid on my desktop. Why can I not install multimedia support for common formats following the guide here?
I've added the medibuntu repo. I'm up to the part where it says "UBUNTU FAMILY 8.10 AND HIGHER USERS ONLY" and i'm following directions for "32-Bit Ubuntu Users". This is what I get when I paste the command in terminal:
[Code]...
It says "0 upgraded, 0 newly installed, 0 to remove", why am I being told this? If this guide is not for Lucid than what guide is?
View 9 Replies
View Related
Nov 18, 2010
I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
View 2 Replies
View Related
Jan 8, 2011
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
View 4 Replies
View Related
May 29, 2010
How to install Multimedia Codecs under Lenny with Gnome?
View 3 Replies
View Related
May 23, 2011
Using Debian stable. 64-Bit. I can play videos and music using Totem and VLC. And I can play audio files with audacious and Rhythmbox. And I can play flash in firefox and google-chrome. But, if I open audacious and then play a flash file in Firefox or google-chrome audacious crashes as well as other multimedia players that I have open such as Totem, VLC and/or Ryhthmbox.
Would like to know if you can offer some troubleshooting steps to take so that I can play a flash file in a browser and still play an mp3 file in the audio player without having to kill those processes and restart.
View 7 Replies
View Related
Jun 23, 2011
I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
View 1 Replies
View Related
