I just installed Audacity and as soon as it's done installing all sounds (speakers and headphones) go off. As soon as I delete Audacity and reboot everything works fine again.
View 3 RepliesAudacity doesn't play any sounds, although it can record from my microphone. And kubuntu plays the startup sounds (BTW, how to turn them off?).
Code:
arho@a91-156-166-231:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
When i want to record sound it record but the voice is very low.which means i need to turn up for full wolume on both headset and pc when i want to hear it, and it still is very low sound..I've tried.Re-installing audacity changing microphone plug microphones directly to pc instead of through headset.both the 'pink' and blue jacktick port (also with above options)
View 2 Replies View RelatedIm on XP and am trying to get a 9 min piece of music from a cassette on my music centre into audacity on my comp got the line from earphone socket into the blue socket at back of comp (there are 3 sockets in a line then 3 more below them in a line go the line in socket... blue top left. )
Im getting sound ok on the comp with radio, its playing vids etc well so I cant think anything is wrong with the sound card. Playing the cassette on my music centre should get the sound into the comp and into the comp speakers.... but I just cant get a peep
Background: I'm digitizing an old record. I used Sound Recorder to make FLACs of each side of the LP, and now I need to edit them down to individual tracks. I'm using the development version of Ubuntu 10.04.
Problem: Audacity ignores these FLAC files when I attempt to import or open them.
The FLAC files play if I hover the mouse over them in GNOME.
Audacity gladly imports FLAC files I ripped from CD last year (using Sound Juicer I think).
But when I try to do the same for my recorded FLAC files, nothing happens. I tried running audacity in a terminal window, and there is no additional output when I attempt the import. This comes out when I start it:
Code:
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
bt_audio_service_open: connect() failed: Connection refused (111)
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
Looking at the file properties, they're basically the same except the Juicer-generated file has values filled in for title, artist, album, year. They are all FLAC Stereo 44100 Hz. I thought it might be a file-size problem, so I made a 5-second test with Sound Recorder, and that also refuses to import.
So, why do only the ripped files work with Audacity?
I want to be able to record the sounds coming through my soundcard with Audacity. How would i go about doing this?
View 1 Replies View RelatedI am trying to record in Audacity in Ubuntu 8.10 64 bit on a Dell Studio 1535 laptop.The problem is not that its not recording, per se.Rather, the problem is its not recording the way that I want it to.
Its recording from the built-in mic, and I want to use the mic jack instead as a line in from a guitar (well, technically, an acoustic-electric resonator, but its close enough to a guitar to call it a guitar).
I have tried using various devices for recording, and changing settings in both the Volume Control and Sound Preferences, but no matter what I do, Audacity still records from my built-in microphones, instead of from the line-in.
I'm trying to record some audio from 4-track cassette tapes using Audacity and a Sound Blaster mp3+ external usb audio card.I'm using Karmic.I have fiddled with levels on the sound card using alsamixer, but the only I way I can detect any sound from the tapes when recording is by turning the levels all the way up in alsamixer, and in doing this, I can faintly make out the audio beneath a large wall of static. If the levels are not maxed out, I only get static when recording in Audacity.
View 3 Replies View RelatedWhen I try to playback a sound file in aucadity just after having played one in rhythmbox or totem or vlc (or presumably any other media player), I get the following message :
"Error while opening sound device. Please check the output device settings and the project sample rate."
When I try again 2 or 3 seconds later, playback works fine. In fact if I wait 2 or 3 seconds after having stopped playback in rhythmbox or totem before starting playback in audacity, audacity doesn't give me the error message at all. Just wondering what causes this delay (as there are no delays when I go from rhythmbox to totem or vlc or anything else).
I am trying to use FC12 to edit multimedia projects for my work.
Right now I just want to edit some audio in Audacity.
I switched back to Linux after a few years, because it usually is "better" than Windows.
I cannot get any sound. I installed ALSA removed and reinstalled PulseAudio and everything else I could find in a forum, to no avail.
Linux tells me my sound card is: 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
I used to be able to play MP3s but that went away in the process of all this.
Is there one solution I am missing, or do I have to change everything around depending on what I am doing?
I would like to use Linux for this but deadlines might make me go back to the dark side....
I've found somewhere on the forum I need to check whether "wave" in alsamixer is not muted. There is another posibility: change source in audacity to "wave". There is no option like this in my program and I don't know where can I find that "wave" in alsamixer. I don't use any like artsd, jack... Just alsa + fluxbox + audacity.
View 3 Replies View RelatedI'm running Fedora 15 XFCE spin, Audacity 1.3.13-beta and my sound is ALSA/Pulseaudio (I'm not totally sure what these are anyway, are they drivers?) Anyway, when I'm in Audacity and I go to the record options I can choose from default, pulse, and HDA ATI SB:ALC268 Analog (hw:0,0). If I try any of these three options and press record I get static. Here's a screenshot of what it looks like to press record for each of the three options in order.
[URL]
The last option won't even record nothing, it just doesn't work. Also, if you look where the little picture of the microphone is, the option to drag the input volume is greyed out.
I just bought an Audigy SE sound card. It sounds fine for regular playback, but, for recording through Audacity, all I hear is this scratchy/distorted sound like it's turned all the way up. I tried lowering the volumes in alsamixer, but, that didn't work. Wanted to know if anyone had a solution before I send it back.
View 6 Replies View RelatedCan anyone recommend a simple to use sound recorder akin to audacity that would be easy to install into Ubuntu 10.04 Desktop Edition? I want to be able to use: line-in/mic/etc.
View 8 Replies View Relatedas audacity comes without MP3 support I tried to compile audacity for Fedora 13 myself. The compilation works fine (configure/make/make install) but there is no sound system to choose at preferences/devives/host.
Does anyone ahve an idea what went wrong with compilation or where I can finde rpm files including MP3 support?
i can't record with my mic anymore. I went to do so in audacity and i only get the noise it hears through the headphones. I am recording a second vocal track. The first track is the music. I looked at the alsamixer and the mic was originally muted and i unmuted. Should line be muted when i am using the mic? I also tried to record with the mic in sound recorder but got nothing there either.
View 9 Replies View RelatedI've been trying to learn how to record my guitar parts onto Audacity using my Pod XT.I've always used Audacity to do my audio recordings since its much more user friendly than Ardour and just as capable IMO.However, I cannot get Audacity to work with the Pod.I downloaded the "line6-usb-source" using apt-get.Ubuntu seems to recognize the Pod and get a signal just fine (when I go to "Sound Preferences" it allows me to select the Pod XT as input hardware and even shows an incoming signal).When I go to Audacity's preferences,it allows me to select the Pod as the "Recording Device", however when I go to record it gives me an error saying to check the Project Sample Rate.
Does the Pod not output at 44100 Hz?Is there a way to change the sample rate the Pod puts out?Is there another setting in Audacity I need to adjust?I do not want to wine or emulate anything.I feel I shouldn't have to use a specific audio recording software to use a piece of a hardware I paid good money for.
Trying to edit some mp3's and join them together using Audacity 1.3.9 but when I try to export I get this "edit metadata" window??? I have all the libraries I believe (Lame, ffmpeg, etc.) with the right versions (I think). Running Ubuntu 9.10.
View 3 Replies View RelatedI installed Audacity to convert an mp4 to an mp3. Now, I don't necessarily need Audacity to do this, but for the time being I'm more concerned with getting Audacity to work properly as opposed to getting an mp3 onto my iPod.
In Audacity, I went to Edit>Preferences>Libraries. For the MP3 Export Library, Audacity recognizes LAME, but under the FFmpeg Import/Export Library it says "FFmpeg library not found." I hit the Download button and read this page on how to install FFmpeg, noticing the warning about needing FFmpeg 0.5 or later on Linux.
I fired up Synaptic and searched for "ffmpeg," chose the vanilla version and installed it along with two dependencies which I don't exactly remember but I bet they were libavformat52 and libavdevice52.
Back in the Audacity Preferences window I chose the "Locate..." button to point to the newly installed libraries, but Audacity is not recognizing/installing them successfully. I've tried pointing to the following files:
/usr/lib/libavformat.so.52
/usr/lib/libavformat.so.52.36.0
/usr/lib/i686/cmov/libavformat.so.52
/usr/lib/i686/cmov/libavformat.so.52.36.0
/usr/share/lintian/overrides/libavformat52
[Code]....
Did I install the wrong version of FFmpeg or libavformat? Any pointers?
So I asked around and to combine audio files apparently I want to use Audacity.
It seems easy enough to LAYER audio files, but how do you string them together in sequence? I have an audiobook divided into 5 minute chapters and I want to combine them into longer chapters....my MP3 player likes to play them out of order which makes them difficult to listen to. I want to make it 1 long tract, or maybe 6 medium length tracks.
How do I combine tracks with Audacity...Not layering them but putting them in order into 1 long track?
I'm running Ubuntu 10.04, using Audacity 1.3.12 beta... and trying to get it to work with a USB Mic.
In Audacity ALSA I/O preferences, I can select the USB mic. But when I record, the input meter stays at about half-way and does not fluctuate when I speak into the microphone... I can hear myself very faintly on the playback... but it is very quiet and there is a loud buzzing. There are no mechanical reasons for this buzzing, such as computer fan, etc...
Also, I cannot find the USB mic in Ubuntu Sound Prefereces...
This is from "Device Info" in audacity:
Has anyone got any experience with running audacity on a netbook (+/- 1,2 GHZ processor, 1 GB memory). Did it go smoothly or was multi-track editing not really working as you would wish in terms of speed and smoothness?
View 4 Replies View RelatedAudacity doesn't have a menu bar anymore!It doesn't even have that narrow space where a menu bar would be!My problem doesn't have anything to do with Gnome's menubars as far as I can tell, but I even tried removing and reinstalling Audacity.
View 9 Replies View RelatedI installed Audacity from Software center and launched it but it didn't have menu like this.
I tried to lauch it in Terminal and here is output in Terminal:
Code:
Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
no more csLADSPA plugins
I was using a line device to record compact cassettes to digital (Linear PCM) then I transferred these files to the computer.Due to cassette print-through, there is audible, albeit weak, pre-echo. This is not caused by the recorder since I can hear them playing the cassettes on a deck.So. Does Audacity have a pre-echo removal function, or can a similar result be obtained by applying different effects? Or any 3rd-party plug-ins?
View 1 Replies View RelatedSceanrio: Childs homework requires the use of Audacity. Of course all other students working on the project with him have Windows. So I need mp3 supported with Audacity.Error message box, "you have compiled Audacity without mp3 support"Downloaded from: YAST with an additional plug-ins (I think).What I need: How do I add mp3 support, or compile it for Audacity?Does anyone have experience with this program? And have mp3 importing and playing within it also?
View 8 Replies View Relatedhow do i get audacity to record what the computer is playing? for instance, if i have a videos video open in firefox and i want to record the audio, what would i have to do? i've played around with the audio setting in ubuntu and audacity 1.3.9 but i couldn't get it to work.
View 2 Replies View RelatedIs there a way to make the db waveform the default in audacity.
View 1 Replies View RelatedConfigure: error: Unable to locate a suitable configuration of wxWidgets v2.4.x. The currently available configurations are listed below. If necessary, either install the package for your distribution or download the 2.4.x version of wxWidgets from [URL]. To help configure find the right version set WX_CONFIG to point to it. wxWidgets 2.5.x and 2.6.x are NOT supported! But I thought I installed widgets 2.4?
View 2 Replies View RelatedHow to select input source in Audacity?
View 1 Replies View Related